- Thomson 25-Channel Caller ID with Call Waiting Cordless Telephone User's Guide

DESKTOP INSTALLATION

CAUTION: Use only the Thomson 5-2455 (black)/ 5-2454 (white)

power supply that came with this unit. Using other adapters may damage

the unit.

1. Place the handset in the base.

2. Set the RINGER switch on the handset to ON.

3. Raise the base antenna.

4. Plug the power supply cord into the base and then into an AC outlet.

The CHARGE/IN USE light comes on indicating that the battery is

charging.

Allow the phone to charge for 12 hours before using the first

time. If you don't charge the phone properly (for 12 hours)

when you first set up the phone, perfomance of the battery will

be compromised.

5. After charging, connect the telephone cord to the phone and then to the

wall jack.

NOTE: For

desktop charging

only, the handset

is able to charge

facing up or

down.

NOTE : The phone automatically defaults to touch-tone dialing. To change to

pulse (rotary) dialing, see “Tone/Pulse Dialing. If you don’t know which type

of service you have, check with the phone company.