- Thomson 25-Channel Caller ID with Call Waiting Cordless Telephone User's Guide

7
WALL MOUNT INSTALLATION
Because it is necessary to charge
the handset for 12 hours prior to
connecting the phone for use the
first time, it is better to leave the
unit on a flat surface during initial
charge before attempting to hang it
on the wall.
1. Place the handset in the base.
2. Connect the power supply
adapter into the base and then
an AC outlet.
Allow the phone to charge
for 12 hours before using the
first time. If you don't
charge the phone properly
(for 12 hours) when you first
set up the phone,
perfomance of the battery
will be compromised.
The CHARGE/IN USE light
comes on indicating that the
battery is charging.
3. Set the RINGER switch on the
handset to ON.
4. After charging, plug the short
phone line cord into the phone
jack on the back of the unit and
then to the wall jack.
5. Attach the wall mount bracket by
inserting the two tabs at the top
and then snapping the tab at the
bottom into place.
1
2
5
CAUTION: Use only the Thomson
5-2455 (black)/ 5-2454 (white)
power supply that came with this
unit. Using other adapters may
damage the unit.
4
3