Manual

Usmg, Y0ur ,.- ,and Remote

WithVCRs: Setting the VCR 1 Channel

The VCR 1 Channel works with VCR1 buttonon the remote. Ifthe VCR 1

Channel is set, pressing VCR1 selects the channel to see the VCR picture.

The VCR 1 Channel setting depends on which diagram you have used

from the Connection Guide. If you want to turn this feature off, set the

VCR 1 Channel to Disable. Refer to the chart below for your setting.

_1._Select the Setup Menu

_ontrols Alarm

A. Press TV to set the remote to

control the TV.

B. Press MENU.PROG to select the"

Setup menu. This menu is

white.

2. Highlight VCR1 Channel

Controls Alarm

A. Press MOVE • to highlight the

VCR 1 Channel.

B. Press MOVE • to highlight the

channel.

3. Enter channel number

Controls Alarm Ad

Enter channel 00, 03, or 04. Choose

your setting from the chart below.

PressCHANNEL down until

'.'Disabled" is

displayed to turn the feature off.

Diagram used from the

Connection Guide:

"_ '.. 'i • " '

1B, 1C_ 2B, 2C; 3B, 3C, 4C, 5C

.... : " ,_ 4B,5B

Set VCR 1 Channel to:

3 or 4 (same as 3/4 switch) "