Manual
With a Satellite Receiver: BasicOperation
You may also be able to use the TV's remote with satellite receivers. Refer
to your Satellite Receiver owner's manual tohook up your Satellite Receiver.
The remote may need to be programmed for other brands of satellite
receivers, but may not operate all models of the brands listed below. Use
the codes below or on the sheet packed in with your raraote.
Follow the instructions below for basic operation of your receiver. You
may also want to experiment with other buttons on the remote to see if
-they work with your receiver.
Program the remote for your
Satellite Receiver
Turn on the Satellite
ReceiVer
Turn off the Satellite
Receiver
Satellite Receiver Codes
Chaparral ......:...:...............80,81
Cheyenne ......................_........81
Drake .................................82,83
DSS ..........................................00
GE.........:.....................:............00
General Instruments...92,93,94
ProScan ...................................00
RCA .........................................00
Realistic ..................................84
Sierra I,II,III ......:.....................81
STS1................ :......,................85
STS2....:..:...:......:....................:.86
STS3....................................:.._87
STS4......:..., ........................'..:..88,
Toslu_a ...................................89
Uniden ....................:...:....:.......90
Video Cipher II.......,:..... .......91
(E3
o ®_o
MUTE CHAN PREV OH
10 20,30
40 50 60
70 80 90
INPUT-o O0 ANTENNAo
CLEAR MENU'PROG RESET
E] [] E3
A. Point the remote at the satellite
receiver and hold SAT*CABLE.
B. Enter the code for your brand
from the code list below.
C°
D.
Release SAT*CABL E•
Press POWER. Ifnothing
happens, try pressing
SAT*CABLE and then POWER.
A. Press SAT*CABLE to set the
remote to control the sateUite
receiver.
B. Press POWE R tOturn on:the, •I,
receiver if it did not turn on
when you pressed SAT*CABLE.
A. Press SAT*CABLE to set the
remote to control the satellite
receiver.
B. Press POWER to turn off
the receiver.