Television User's Guide Changing Entertainment. Again.
Important Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates important instructions accompanying the product.
Important Information Alert Guard™ Important Information • • • • • • • • • • • The green READY light on the front panel of the TV is the main indicator that the Alert Guard system is receiving NWR broadcast information. If it's not lit, the Alert Guard system can’t inform you of alerts. During poor reception conditions, the Alert Guard system might not inform you of alerts even if the green light is on.
Table of Contents Chapter 1: Connections & Setup Things to Consider Before You Connect ....................................................................... 3 Protect Against Power Surges ........................................................................... Protect Components from Overheating ........................................................... Position Cables Properly to Avoid Audio Interference .................................... Important Stand and Base Safety Information ................
Table of Contents Chapter 3: Using the TV’s Features Alert Guard ................................................................................................................... 18 Alert Options .................................................................................................... Locations ........................................................................................................... News Weather ..................................................................................
Chapter 1: Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • • • Connect all components before you plug any of their power cords into the wall outlet. Turn off the TV and/or component before you connect or disconnect any cables. Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions packed separately. Protect Components from Overheating • • • • Don’t block ventilation holes on any of the components.
Connections & Setup TV (back panel) VCR AUDIO EXT Alert Guard ANT OUT TO TV CH3 CH4 OUT L R L IN FROM ANT 2 VIDEO 3 R IN R Y L V OUTPUT VIDEO 2 VIDEO R AUDIO L/MONO VIDEO L Pb Pr AUDIO Pb Y R Pr TV ANT VIDEO 1 3 R L/MONO VIDEO S-VIDEO IN AUDIO From Cable or Antenna 1D 1B DVD 1A 1C* OUT Pr Pb Y R L VIDEO S-VIDEO TV + DVD + VCR * If you connect an S-Video cable, you must connect the audio cables to the VIDEO 1 AUDIO jacks on the back of the TV, not the VIDEO 2 AUDIO jac
Connections & Setup Explanation of Jacks This section describes the jacks you can use to make connections. There are several ways to connect components to your TV. TV ANT Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or if using the example on page 4, a VCR. EXT Alert Guard ANT Lets you connect an antenna if you need to receive a stronger signal for the Alert Guard feature. Go to page 8 for more information.
Connections & Setup V L OUTPUT R AUDIO/VIDEO OUTPUTS (Video Out not available on model 27V570T) Lets you connect an amplifier or audio receiver for improved sound quality or an external video monitor, for models with Video Out. The Front of Your TV Alert Guard Front Panel Buttons and Lights READY (Green Light) Remains lit as long as the TV is receiving a strong signal.
Connections & Setup Front Input Jacks The TV has front input jacks for your convenience: one set of audio/video inputs, an S-Video and a headphone jack. These jacks are towards the front of the TV on the side. To access the component you connected to the front of the TV, press the INPUT button on your remote until FRNT (SFRNT for S-VIDEO) appears on the screen. The jacks are ideal for connecting a video game console or a camcorder.
Connections & Setup Connect Alert Guard Antenna Connect the supplied antenna, with the rod positioned straight up and down, to the EXT Alert Guard ANT jack on the back of the TV. TV (back panel) Connect TV Antenna VIDEO 3 Y L R V R AUDIO L/MONO VIDEO OUTPUT VIDEO 2 EXT Alert Guard ANT If you haven’t already, connect the coaxial cable from your cable source (if using the example on page 4, a VCR) to the TV ANT jack on the back of the TV.
Connections & Setup Turn on the TV Press TV on the remote, or press POWER on the TV’s front panel. Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions. Complete the Initial Setup SETUP Go Back Auto Ch. Search ... Closed Caption ... Auto Tuning ... Language English . . . AUTO CHANNEL SEARCH Go Back Signal Type Cable. . .
Connections & Setup 2. The PICK FROM LIST menu appears with All of U.S. highlighted. Press the left or right arrow button to choose your region- the state, territory, or marine area where you are living or District of Columbia. These are listed in alphabetical order, with marine areas at the end of the list (press the left arrow button to access these quickly, starting at the end of the list). PICK FROM LIST Go back All of U.S. . . . Continue ...
Chapter 2: Using the Remote Control Indicator ON OFF VCR1 DVD VCR2 TV AUX SAT•CABLE MUTE SKIP VOL VOL CH + CH - SOUND GO BACK GUIDE INFO OK MENU CLEAR 3 2 1 4 7 5 6 8 9 INPUT ANTENNA 0 REVERSE PLAY FORWARD RECORD STOP PAUSE ALERT GUARD VIEW HEAR STOP NEWS MESSAGE VOICE ALARM WEATHER Button Descriptions for TV Mode Arrows Used to point to different items in the TV menu and to adjust the menu controls.
Using the Remote Control Button Descriptions for Other Modes AUX Puts the remote in AUX mode. Can also be programmed to operate most brands of an additional remote-controllable component. ANTENNA In VCR mode, functions as a TV/VCR button. In SAT•CABLE mode, functions as a TV/receiver button. DVD Puts the remote in DVD mode and, if auto tuning is enabled, will turn on the TV and tune to the correct video input channel.
Using the Remote Control ON OFF VCR1 VCR1 and ON•OFF buttons VCR2 DVD Programming the Remote to Operate Other Components TV AUX SAT•CABLE MUTE SKIP VOL VOL CH + CH - SOUND GO BACK GUIDE INFO DVD, VCR2, AUX and SAT•CABLE buttons OK The universal remote can be programmed to operate most brands of remote controllable components. The remote is already programmed to operate most RCA, GE, and Proscan components.
Using the Remote Control If the component you want to control does turn off: 1. Press and release REVERSE, then wait 2 seconds. Repeat this step until the component turns back ON. 2. To finish, press and hold STOP until the indicator on the remote turns off. Using Direct Entry 1. Turn on the component to be programmed. 2. Look up the brand and code number(s) for the component on the code list in this section. 3. Press and hold the component button you want to program on the remote. 4.
Using the Remote Control Remote Control Codes VCR Codes Programmable for VCR1, VCR2 and AUX buttons. Admiral ..................................................................................... 2132 Adventura ................................................................................ 2026 Aiko .......................................................................................... 2027 Aiwa ......................................................................................... 2026 Akai ..........
Using the Remote Control VCR Codes continued Shintom .................................................... 2004, 2056, 2061, 2098 Shogun ...................................................................................... 2013 Signature .................................................................................. 2132 Singer ................................................................... 2021, 2061, 2128 Sony .......................................................... 2004, 2098, 2099, 2119 STS ...
Using the Remote Control Satellite Receiver Codes continued STS3 ......................................................................................... 5066 STS4 ......................................................................................... 5067 Toshiba .......................................................................... 5068, 5073 Uniden ..................................................................................... 5086 Audio Codes Sherwood .....................................
Chapter 3: Using the TV’s Features Alert Guard Alert Guard receives digital data known as SAME (Specific Area Message Encoding) combined with audio information provided by NOAA (National Oceanic and Atmospheric Administration) Weather Radio (NWR). Note: For more information about NOAA, visit www.noaa.gov. NOAA conducts a weekly test for the all hazards broadcast system. The test is once a week on Wednesday between 10 a.m. and 12 noon for approximately 15 minutes.
Chapter 3: Using the TV’s Features Alerts Warning level Avalanche W arning Nuclear P ower Plant Warning Blizzard W arning Practice/Demo Warning Civil Danger W arning Civil Emergency Message Dust Storm W arning Flash Flood W arning High Wind W arning Hurricane W arning Flood Statement Hurricane Statement Local Area Emergency Tornado W atch Tropical Storm W atch Tsunami W atch Winter Storm W atch Tropical Storm Warning Hazardous Materials Warning Flash Flood Statement Severe Thunderstorm Watch To
Using the TV’s Features 6. Press the down arrow button to highlight Alarm type. Press the right arrow button to highlight the type of alarm you want to hear when receiving an Advisory. If you don’t want any alarm set, choose None. Notes: For models 20F670T, 27V570T and 27F670T, don’t leave headphones plugged in when they aren’t in use. Alarms will sound through the headphones and not the TV’s speakers, causing alarms not to be heard.
Using the TV’s Features 9. If you can’t find your location, you need to set it manually. Press the down arrow button to highlight Location code. 10. Go to pages 37-54 or call toll-free 1-800-NWR-SAME to find the location code for your area. Enter the code using the number buttons on the remote. Note: Occasionally the government changes or adds location codes. If you live in a new county or renamed county, you need to call 1-800-NWR-SAME because the code probably isn’t in the list.
Using the TV’s Features Channel Banner There are several items that might appear when you press the TV or INFO button on the remote. This display is called the Channel Banner. The following list describes the items on the Channel Banner screen (left to right and top to bottom). SAP SAP Stereo 06 ABCDEF KidPass: 2:24 Skip: 0:30 CC 07:18am X Displayed when the current channel is broadcasting SAP (Second Audio Program) information. Displayed when V-Chip has been activated.
Using the TV’s Features 4. Choose which channel you would like to set: Set VCR1 The channel the TV tunes to when you press the VCR1 button. Set VCR2 The channel the TV tunes to when you press the VCR2 button. Set SAT/CABLE The channel the TV tunes to when you press the SAT•CABLE button. Set DVD The channel the TV tunes to when you press the DVD button. 5. Press the right arrow button to select the choice that matches the way you have the component connected to this TV, and press OK.
Using the TV’s Features Parental Controls and V-Chip The choices in the USA V-CHIP menu involve software inside your TV (referred to as V-Chip) which allows you to block TV programs and movies based on violence, sex, or other content you may believe children should not view. Once you block programs, you can unblock programs by entering a password. By default, the software inside your TV is turned “off.” For instructions to turn on V-Chip, go to page 28.
Using the TV’s Features USA V-Chip TV Rating Limit PARENTAL CONTROL The V-Chip TV Rating Limit lets you decide which TV programs can and cannot be viewed. To set TV programming limits: Go Back V-Chip active USA V-Chip ... Canada V-Chip USAPrgms. V-CHIP Exempt ... KidPass Active Go Back KidPass Movie Ratings Lock Fr. Panel TV Ratings Change Passwd. 1. Choose Parental Control from the MAIN MENU (the PASSWORD screen appears the first time you enter the Parental Control menu).
Using the TV’s Features Blocking Age-Based Ratings Hierarchy of Age-Based Ratings TV-MA Mature Audience Only You can automatically block all program ratings above a specified age-based rating level. TV-14 Parents Strongly Cautioned To block programs with higher ratings: TV-PG Parental Guidance Suggested TV-G General Audience TV-Y7 Directed to Children 7 years and older TV-Y All Children 1.
Using the TV’s Features Viewing Specific Content Themes If you block specific content themes, you have the option of going back and changing some of the content themes back to (V) View: 1. Determine the content themes you want to change to (V) View. 2. Press the down arrow button to scroll to the rating whose content theme you want to change, such as B under language (L) corresponding with TV-14. 3. Press the right arrow button to move the highlight to a particular content theme status. 4.
Using the TV’s Features KidPass The KidPass feature allows parents to set a certain amount of time every day of the week that a child can watch TV. To set KidPass: 1. Select Parental Control from the main menu. 2. Select KidPass (the KIDPASS menu appears with Current Day highlighted). Note: If you can’t select KidPass, you need to set the time. Highlight Go Back, press the right arrow button, then select Time. Highlight Time, then enter the time using the number buttons. 3.
Chapter 4: Using the TV’s Menu System Sound Menu SOUND Treble Increases or decreases the treble. Go Back Treble Bass Increases or decreases the bass. Bass Balance Sound Type Stereo . . . SAP Auto Vol Level Audio Output Int. Speakers Fixed . . . Balance Press the right arrow button to increase the audio output in the right speaker; press the left arrow button to increase the audio output in the left speaker.
Using the TV’s Menu System Picture Menu PICTURE Go Back Picture Preset Bright . . . Auto Color Color Warmth Normal . . . Brightness Contrast Color Sharpness Tint 20F670T, 27V570T, and 27F670T Picture menu PICTURE Go Back Picture Preset Bright . . . Auto Color Color Warmth Normal . . . Brightness Contrast The PICTURE menu options apply to the video for the main TV and video input selections.
Using the TV’s Menu System Setup Menu SETUP Go Back Auto Ch. Search ... List & Labels ... Closed Caption ... Auto Tuning ... Language English . . . Auto Ch. Search (Auto Channel Search) Allows you to choose your signal type and begin an auto channel search. Signal Type Press the left or right arrow button to select the signal your TV is receiving. Choose Cable if you are currently using cable or a cable box for TV signals.
Using the TV’s Menu System CC Mode Choose which captioning mode is used for displaying captioning information. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area. Auto Tuning Displays a choice list that lets you set up the TV to automatically tune to the correct video input channel when you press a component button (VCR1, VCR2, DVD, SAT•CABLE, etc.) on the remote.
Chapter 5: Other Information Troubleshooting Most problems with your TV can be corrected by consulting the following troubleshooting list. Note for U.S. customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. For additional assistance while using your RCA product, please visit www.rca.
Other Information Message on-screen that I might have missed alerts • • Check the green light. If on, the signal might have been lost momentarily due to interference. The NWR channel might be too weak. Press the HEAR VOICE button on the remote. If it’s not clear, you need to search for a stronger channel in the NWR CHANNEL menu. If you’re already receiving the strongest channel, connect an external or amplified antenna to the EXT Alert Guard ANT jack on the back of the TV.
Other Information • • Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the voltage in your house may be abnormally high or low. Unplug TV. Wait five minutes. Plug it in again. TV turns on unexpectedly • • Wake-up timer might have been activated. Go to page 32 for instructions. You might have pressed CH+, CH- or OK on the remote accidentally.
Other Information The Remote Control Doesn’t Work • • • • • Something might be between the remote and the remote sensor on the component. Make sure there is a clear path. Maybe the remote isn’t aimed directly at the component (TV or VCR) that you’re trying to operate. Maybe remote is not in TV Mode. Press the TV button so remote will control TV. Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote.
Other Information Alert Guard Location Codes If you can’t find your location code, call 1-888-NWR-SAME Alabama Counties Autauga 001001 Baldwin 001003 Barbour 001005 Bibb 001007 Blount 001009 Bullock 001011 Butler 001013 Calhoun 001015 Chambers 001017 Cherokee 001019 Chilton 001021 Choctaw 001023 Clarke 001025 Clay 001027 Cleburne 001029 Coffee 001031 Colbert 001033 Conecuh 001035 Coosa 001037 Covington 001039 Crenshaw 001041 Cullman 001043 Dale 001045 Dallas 001047 DeKalb 001049 Elmore 001051 Escambia 00105
Other Information If you can’t find your location code, call 1-888-NWR-SAME Saline 005125 Scott 005127 Searcy 005129 Sebastian 005131 Sevier 005133 Sharp 005135 Stone 005137 Union 005139 Van Buren 005141 Washington 005143 White 005145 Woodruff 005147 Yell 005149 California Counties Alameda 006001 Alpine 006003 Amador 006005 Butte 006007 Calaveras 006009 Colusa 006011 Contra Costa 006013 Del Norte 006015 El Dorado 006017 Fresno 006019 Glenn 006021 Humboldt 006023 Imperial 006025 Inyo 006027 Kern 006029 Kings
Other Information If you can’t find your location code, call 1-888-NWR-SAME Leon 012073 Levy 012075 Liberty 012077 Madison 012079 Manatee 012081 Marion 012083 Martin 012085 Miami-Dade 012086 Monroe 012087 Nassau 012089 Okaloosa 012091 Okeechobee 012093 Orange 012095 Osceola 012097 Palm Beach 012099 Pasco 012101 Pinellas 012103 Polk 012105 Putnam 012107 St. Johns 012109 St.
Other Information If you can’t find your location code, call 1-888-NWR-SAME Hawaii Counties Hawaii Honolulu Kalawao Kauai Maui Idaho Counties Ada Adams Bannock Bear Lake Benewah Bingham Blaine Boise Bonner Bonneville Boundary Butte Camas Canyon Caribou Cassia Clark Clearwater Custer Elmore Franklin Fremont Gem Gooding Idaho Jefferson Jerome Kootenai Latah Lemhi Lewis Lincoln Madison Minidoka Nez Perce Oneida Owyhee Payette Power Shoshone Teton 016001 016003 016005 016007 016009 016011 016013 016015 016017
Other Information If you can’t find your location code, call 1-888-NWR-SAME Jay Jefferson Jennings Johnson Knox Kosciusko LaGrange Lake La Porte Lawrence Madison Marion Marshall Martin Miami Monroe Montgomery Morgan Newton Noble Ohio Orange Owen Parke Perry Pike Porter Posey Pulaski Putnam Randolph Ripley Rush St.
Other Information If you can’t find your location code, call 1-888-NWR-SAME Saline 020169 Scott 020171 Sedgwick 020173 Seward 020175 Shawnee 020177 Sheridan 020179 Sherman 020181 Smith 020183 Stafford 020185 Stanton 020187 Stevens 020189 Sumner 020191 Thomas 020193 Trego 020195 Wabaunsee 020197 Wallace 020199 Washington 020201 Wichita 020203 Wilson 020205 Woodson 020207 Wyandotte 020209 Kentucky Counties Adair 021001 Allen 021003 Anderson 021005 Ballard 021007 Barren 021009 Bath 021011 Bell 021013 Boone 021
Other Information If you can’t find your location code, call 1-888-NWR-SAME Louisiana Parishes Acadia 022001 Allen 022003 Ascension 022005 Assumption 022007 Avoyelles 022009 Beauregard 022011 Bienville 022013 Bossier 022015 Caddo 022017 Calcasieu 022019 Caldwell 022021 Cameron 022023 Catahoula 022025 Claiborne 022027 Concordia 022029 DeSoto 022031 E. Baton Rouge 022033 E. Carroll 022035 E.
Other Information If you can’t find your location code, call 1-888-NWR-SAME Washtenaw 026161 Wayne 026163 Wexford 026165 Minnesota Counties Aitkin 027001 Anoka 027003 Becker 027005 Beltrami 027007 Benton 027009 Big Stone 027011 Blue Earth 027013 Brown 027015 Carlton 027017 Carver 027019 Cass 027021 Chippewa 027023 Chisago 027025 Clay 027027 Clearwater 027029 Cook 027031 Cottonwood 027033 Crow Wing 027035 Dakota 027037 Dodge 027039 Douglas 027041 Faribault 027043 Fillmore 027045 Freeborn 027047 Goodhue 02704
Other Information If you can’t find your location code, call 1-888-NWR-SAME Noxubee 028103 Oktibbeha 028105 Panola 028107 Pearl River 028109 Perry 028111 Pike 028113 Pontotoc 028115 Prentiss 028117 Quitman 028119 Rankin 028121 Scott 028123 Sharkey 028125 Simpson 028127 Smith 028129 Stone 028131 Sunflower 028133 Tallahatchie 028135 Tate 028137 Tippah 028139 Tishomingo 028141 Tunica 028143 Union 028145 Walthall 028147 Warren 028149 Washington 028151 Wayne 028153 Webster 028155 Wilkinson 028157 Winston 028159
Other Information If you can’t find your location code, call 1-888-NWR-SAME Rosebud 030087 Sanders 030089 Sheridan 030091 Silver Bow 030093 Stillwater 030095 Sweet Grass 030097 Teton 030099 Toole 030101 Treasure 030103 Valley 030105 Wheatland 030107 Wibaux 030109 Yellowstone 030111 Nebraska Counties Adams 031001 Antelope 031003 Arthur 031005 Banner 031007 Blaine 031009 Boone 031011 Box Butte 031013 Boyd 031015 Brown 031017 Buffalo 031019 Burt 031021 Butler 031023 Cass 031025 Cedar 031027 Chase 031029 Cherry
Other Information If you can’t find your location code, call 1-888-NWR-SAME Valencia 035061 New York Counties Albany 036001 Allegany 036003 Bronx 036005 Broome 036007 Cattaraugus 036009 Cayuga 036011 Chautauqua 036013 Chemung 036015 Chenango 036017 Clinton 036019 Columbia 036021 Cortland 036023 Delaware 036025 Dutchess 036027 Erie 036029 Essex 036031 Franklin 036033 Fulton 036035 Genesee 036037 Greene 036039 Hamilton 036041 Herkimer 036043 Jefferson 036045 Kings 036047 Lewis 036049 Livingston 036051 Madison
Other Information If you can’t find your location code, call 1-888-NWR-SAME McKenzie 038053 McLean 038055 Mercer 038057 Morton 038059 Mountrail 038061 Nelson 038063 Oliver 038065 Pembina 038067 Pierce 038069 Ramsey 038071 Ransom 038073 Renville 038075 Richland 038077 Rolette 038079 Sargent 038081 Sheridan 038083 Sioux 038085 Slope 038087 Stark 038089 Steele 038091 Stutsman 038093 Towner 038095 Traill 038097 Walsh 038099 Ward 038101 Wells 038103 Williams 038105 Northern Mariana Islands Northern Islands 06908
Other Information If you can’t find your location code, call 1-888-NWR-SAME Texas Tillman Tulsa Wagoner Washington Washita Woods Woodward Oregon Counties Baker Benton Clackamas Clatsop Columbia Coos Crook Curry Deschutes Douglas Gilliam Grant Harney Hood River Jackson Jefferson Josephine Klamath Lake Lane Lincoln Linn Malheur Marion Morrow Multnomah Polk Sherman Tillamook Umatilla Union Wallowa Wasco Washington Wheeler Yamhill Chapter 5 040139 040141 040143 040145 040147 040149 040151 040153 041001 041003
Other Information If you can’t find your location code, call 1-888-NWR-SAME Quebradillas 072115 Rincón 072117 Río Grande 072119 Sábana Grande 072121 Salinas 072123 San Germán 072125 San Juan 072127 San Lorenzo 072129 San Sebastián 072131 Santa Isabel 072133 Toa Alta 072135 Toa Baja 072137 Trujillo Alto 072139 Utuado 072141 Vega Alta 072143 Vega Baja 072145 Vieques 072147 Villalba 072149 Yabucoa 072151 Yauco 072153 Rhode Island Counties Bristol 044001 Kent 044003 Newport 044005 Providence 044007 Washington 0
Other Information If you can’t find your location code, call 1-888-NWR-SAME Lake Lauderdale Lawrence Lewis Lincoln Loudon McMinn McNairy Macon Madison Marion Marshall Maury Meigs Monroe Montgomery Moore Morgan Obion Overton Perry Pickett Polk Putnam Rhea Roane Robertson Rutherford Scott Sequatchie Sevier Shelby Smith Stewart Sullivan Sumner Tipton Trousdale Unicoi Union Van Buren Warren Washington Wayne Weakley White Wiliamson Wilson Chapter 5 047095 047097 047099 047101 047103 047105 047107 047109 047111
Other Information If you can’t find your location code, call 1-888-NWR-SAME Reagan Real Red River Reeves Refugio Roberts Robertson Rockwall Runnels Rusk Sabine San Augustine San Jacinto San Patricio San Saba Schleicher Scurry Shackelford Shelby Sherman Smith Somervell Starr Stephens Sterling Stonewall Sutton Swisher Tarrant Taylor Terrell Terry Throckmorton Titus Tom Green Travis Trinity Tyler Upshur Upton Uvalde Val Verde Van Zandt Victoria Walker Waller Ward Washington 048383 048385 048387 048389 048391
Other Information If you can’t find your location code, call 1-888-NWR-SAME Manassas 051683 Martinsville 051690 Newport News 051700 Norfolk 051710 Norton 051720 Petersburg 051730 Poquoson 051735 Portsmouth 051740 Radford 051750 Richmond 051760 Roanoke 051770 Salem 051775 Staunton 051790 Suffolk 051800 Virginia Beach 051810 Waynesboro 051820 Williamsburg 051830 Winchester 051840 Virginia Counties Accomack 051001 Albermarle 051003 Alleghany 051005 Amelia 051007 Amherst 051009 Appomattox 051011 Arlington 05101
Other Information If you can’t find your location code, call 1-888-NWR-SAME Pleasants 054073 Pocahontas 054075 Preston 054077 Putnam 054079 Raleigh 054081 Randolph 054083 Ritchie 054085 Roane 054087 Summers 054089 Taylor 054091 Tucker 054093 Tyler 054095 Upshur 054097 Wayne 054099 Webster 054101 Wetzel 054103 Wirt 054105 Wood 054107 Wyoming 054109 Wisconsin Counties Adams 055001 Ashland 055003 Barron 055005 Bayfield 055007 Brown 055009 Buffalo 055011 Burnett 055013 Calumet 055015 Chippewa 055017 Clark 05501
Other Information Limited Warranty (for models 20F670T, 27F670T and 32F670T) What your warranty covers: • Defects in material or workmanship. For how long after your purchase: • One year from date of purchase for labor charges. • One year from date of purchase for parts. • Two years from date of purchase for picture tube. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm whichever comes first.
Other Information Product Registration: • Please complete and mail the Product Registration Card packed with your TV or register on-line at www.rca.com/productregistration. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT.
Other Information Limited Warranty (for model 27V570T) What your warranty covers: • Defects in material or workmanship. For how long after your purchase: • 90 days from date of purchase for labor charges. • One year from date of purchase for parts. • Two years from date of purchase for the picture tubes. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
Other Information Product Registration: • Please complete and mail the Product Registration Card packed with your TV or register on-line at www.rca.com/productregistration. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT.
Other Information ON OFF VCR1 DVD VCR2 TV AUX SAT•CABLE MUTE SKIP VOL VOL CH + CH - SOUND GO BACK GUIDE INFO OK MENU CLEAR 1 2 3 4 5 6 8 7 Remote Control This is the remote control that came packed with your TV. Replacements or spares can be ordered as needed. 9 INPUT Part No. Price VH81 $3.95 Description Screw-on antenna cable (3-ft) Screw-on antenna cable (6-ft) VH82 $4.95 Push-on antenna cable (6-ft) VH89 $5.95 Monaural VCR Dubbing Cable (6-ft) VH83 $5.
Televison Receiver This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. FCC Declaration of Conformity This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
