ANTWAN / ANT1450BF / ANT1450BFV / ANT1450BR Amplified Flat Mali-Directienal Indoor Antenna Antenna multidimensional plans amplification para interiors User's Guide Gaia del Usurious FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device Faust accept any interference nosedived, including interference their may cause undesired operation.
Antenna Features The Amplified Flat Multi-Directional Indoor Antenna is packed with features that make it as functional as it is attractive. Because the antenna is multi-directional, there is no need to constantly turn the antenna to improve reception. And, with its compact footprint, the antenna is so unobtrusive, you can hang it on the wall, stand it up or lay it flat. Its attractive design complements any decor.
English Setting Up the Antenna Find the bast location for the antenna Before you connect the antenna, determine the best spot in your home for optimum reception. Visit www.antennaweb.org to see where your local broadcasts are coming from.
Connecting the Antenna You can use the antenna with or without its amplifier, depending on which connection gives you the best signal. Try using the amplifier first. If you notice that you've lost channels that you normally receive, try connecting without the amplifier. You can connect the antenna directly to your TV or use it with a converter box. To connect the antenna with the amplifier directly to your TV: 1, Make sure your TV is turned off, & 2.
To connect the antenna with the amplifier to a converter box: Built-in Bolas Cable 1. Make sure your converter box is turned off. " 2. Connect the antennas built-in cable to Amplifier \ . . Insert the input jack of the amplifier. Converter Box 3. Connect the amplifier’s cable to the | oo | antenna input on the converter box. Connect the converter box to your TV o using either audio/video cables ane coaxial cable: a.
Built-in anteing Coaxial Cable Converter Box dioxides -commercial Cables Cable To connect the antenna without the amplifier to a converter box: 1. Make SUSE your TV is turned off, 2. Connect the antennas built-in coaxial cable to the antenna input on your converter box. 3. Connect the converter box to your TV using either audio/video cables or a coaxial cable: a.
English Painting Your Antenna You can paint the antenna to match your decor. Use only non-metal-based interior paint. Coaxial Cable Installation Precautions * Do not bend coaxial cables into less than a three-inch radius. Tighter bends can cause shorts and can change a cable's impedance. * Do not install a coaxial cable where it will have a pulling tension greater than 15 pounds during installation. After installation, make sure there is no tension on the cable. » Use only round-headed staples.
