Owner's Manual

ENGLISH

5. Attach the antenna to the arm.

Find the other bolt and hex nut included in this package.

First, set the bolt in the antenna’s mounting well. Then position the

arm over the other side of the well. Tighten the nut to attach the arm

to the antenna as shown here.

To adjust the antenna’s position:

1. Loosen the bolt on either end of the arm.

2. Move the arm or antenna to the desired position.

3. Re-tighten the bolt so that the antenna and arm stay ﬁ rmly in

position.

continues on next page...

6. Connect the coaxial cable to the antenna.

Connect the coaxial cable to the F-connector of the antenna as shown

here. Then cover the connector with the attached weather boot.

Note: If you’re using your own coaxial cable (i.e., not the one provided

with this antenna), make sure to afﬁ x it to the outside of the mounting

base.