TV/VCR/DVD User's G Changing Entertainment. _in.
I p@tr an' I n'f@r a i@n WARNING CAUTION TO REDUCE THE RISK OF FiRE OR ELECTRICSHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION THiS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Key Features Overview Your TV/VC1UDVD is equipped with features that will add to your TV/VCR/DVD viewing experience. "II_e following intk)n=qadon summarizes these features. See Chapter 3 for more information about llle features and how to use them. TV GUIDELINES AGE D TV-Y [] TV-Y7 TV-G TV-PG TV-14 TV-MA [] [] [] [] [] Parental L S V Description: You can block programs and movies by content, age-based radngs, and/or movie ratings that can be watched on your TV.
Index Search Description: Provides a quicker way to find segments videotape (instructions on page 41). of a program on a Requirements: INDX 2 0:30:00 • Insert the pre-recorded tape into the VCR. • Use the INDEX + and - buttons to locate the index mark. 10:00AM 0CT.15 Virtual Dolby (QSURROUND) Description: "I]sis feature adds a surround effect to your audio. Requirements: • You must use the LINE OUT AUDIO L and R output jacks.. • Turn Compression off (Chapter 4 has details).
TalblM Qf Con't n' s Introduction Key Features Overview .................................................................................................... Parental Controls ........................................................................................................ 1 1 Record One Channel While Watching Another ....................................................... Index Search ...............................................................................................................
lblM Chapter Qf Con't n' s 2: Using the Remote Control The Buttons on the Remote Control ............................................................................. 24 Programming the Remote to Operate Other Components ......................................... Find Out If You Need to Program the Remote ....................................................... How to Program the Remote ..................................................................................
Qf _ Selecting a Chapter ....................................................................................... 48 Selecting a Time Location ............................................................................. 49 Se,ecting Subtit,es ......................................................................................... 49 Changing the Camera Angle ........................................................................ 49 Changing the Audio .............................................
_lblM_ Chapter Qf Con't_n'_s 6: Other Information Troubleshooting .............................................................................................................. The Front of Your TV/VCR/DVD ..................................................................................... 66 70 Back Panel Jacks.............................................................................................................. 71 Care and Cleaning ...........................................................
1 Connections Chapter & Setup Overview: • Things to Consider Before You Connect • Choose Your Connection • Connections • Plug in the TV/VCR/DVD • Put Batteries in the Remote • How to Use the Remote Control to Complete the Initial Setup • Turn on theTV/VCR/DVD • Initial Setup • VCR Basics • DVD Basics Changing Graphics used u ithin this publication are fi)r representation only.
Connections S ' up Things to Consider Before You Connect Protect Against Power Surges • Connect • Turn ol]" the TV/VCR/DVD • Make sure all antennas and cables are properly grounded. packed with your TV/VCR!DVD. Protect all co1:r_ponents bel_re you plug any of their power cords into the wall outlet. Components and/or component before you connect or disconnect any cables. ReR..r to the ImporUant Safeguards sheet from Overheating • Don't block ventilation circulate freely.
Connections S ' up Choose Your Connection "[l_ere are sevei_Jl ways determine which TV/VCR/DVD. to connect connection your TV/VCR/DVD. is best lk_r you. Components _J Proceed Please Notes: picture below show the cables needed page chart Io and connect your Connection Title Cables Needed Go to...
Connections _ S_'_up TV/VCR/DVD BackPanel ANT/CABLE 75D. 0 FromAntenna/CableFeed TV/VCR/DVD 1. Connect Only the antenna/cable feed to the TV/VCR/DVD. Connect the coaxial cable from your cable or antenna "IW/VC1UDVD.
Connections S ' up TV/VCR/DVDBackPanel ANT/CABLE 75_z Satellite Receiver SackPanel From Antenna/CableFeed Note: The back of your satetJite receiver shown here, TV/VCR/DVD 1. Connect + Satellite the satellite receiver From Satellite might not Jook exactly like the one Receiver to the TV/VCR/DVD. A. Connect one end of a coaxial cable (not included) to the TV/VCR/DVD's ANT/CABLE jack. Connect the other end to the satellite receiver's Antenna Output iack (sometimes labeled OUT TO TV). B.
Connections S ' up TV/VCR/DVDSackPanel From Antenna/Cable Feed DOLBYDIGITAL or DTS RECEIVER Note: The back of your Dolby Digital* like the one shown here. or DTS** receiver might not look exactly Dolby Digital ® and DTS® Both Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto fl_e digital Irack of fihn (while the fihn is being made). Bolh of these formats provide up to six separate channels: left, right, center, left rear, right rear, and common subwoofer.
Connections TV/VCR/DVD + Receiver 1A. Digital Connect the Dolby or DTS receiver S ' up to the TV/VCR/DVD If you have a Dolby Digital or DTS receiver will] a Digital Input iack, connect an optical digital cable (not provided) into the OPTICAL DIGITAL OUT iack on the TV/VCR/DVD player and to the Digital Input iack on the back of the receivei: You must also set the digilal output setting in the DVD setup menu (Chapter 5 has details).
Connections _ S_'_up Plug in the TV/VCR/DVD Plug the end of |he power cord into the wall outlet. Match the wide blade of the plug wi|h the wide slot in II]e outlet. Insert the plug completely into the outlet. Put Batteries in the Remote TV button 1. Remove the battery compartment 2. Insert new baltefies. Match the polarities diagram on the remote. 3. Put the battery compartment (+ and -) on lhe baltefies with lhe cover back on the remote.
Connections S ' up Initial Setup "II_e first time you TV/VCR/DVD turn on your TV/VC1UDVD, will be set up correctly. Complete you'll to set a few screens steps so that your to set up your TV/VCR/DVD. Select a Language LANGUAGE The first time you turn on the TV, the SELECTIMA_UAGt]" menu appears on the screen. If you want the TV on-screen menus to appear in English, press the OK button on the remote control.
Connections S ' up Add MENU TIME VIDEO ADJUST AUDIO ADJUST CLOSED CAPTION TIMER RECORDINGS LANGUAGE ,SETTING You might want to add or erase some channels if II]ey're inactive, have weak signals, or you don't want lhem in your channel list. The channel list is dc_elist of channels the TV tunes to when you press the channel up and/or channel down buttons.
Connections S ' up VCR Basics Now that you've finished the initial setup, you can watch TV or start using the VCR part of your product. Playing 1. a Tape Insert a tape in the VCR (the V('R turns on automatically indicator lights on the front panel). If the sal_,.ty tab on the videotape playback. 2. is removed, and the VCR the tape automatically begins Press the VCR button on the remote to put the remote in VCR mode.
Connections TV button S ' up Recording One Channel While Watching 1. VCR Insert a videotape, with its safety tab in place, Another into the VCR. Note: You can't record on a tape with the safety tab removed. If the safety tab is removed and you want to record on the tape, simply cover the hole with adhesive tape. button CH +/- 2. Make sure the remote is in VCR mode buttons 3. Use the CH +/- buttons to select the channel you want to record and press the RECOI_) button to begin recording.
Connections S ' up DVD Basics "II_e first time you turn on the I-)VD player, press the I-)VD SETUP button while the player is stopped. The OSD LANGUAGk" SETUP screen appears on the TV screen. OSD LANGUAGE LANGUAGE: SETUP ENGLISH Set the Menu Language By default, the DVD's on-screen displays are shown in English. If you want the on-screen menus to appear in English, press OK on the remote. To change the language: 1. Press the down arrow button on the remote until the appropriate is highlighted.
Connections Loading S ' up and Playing Discs Your DVD player plays DV1-) discs (3" and 5" discs), audio CD discs (3" and 5" discs), and CDR/CD-RW discs recorded in MP3 format or audio format (3" and 5" discs). On CD-G and CDEXTRA discs, only the sound can be played (no images). Before you load a disc, make sure that it is compatible with the player.
Connections S ' up Using a Disc Menu Some discs have _:qenu might only such as language from disc-to-disc, an on-screen contain a list and playback lhe following 1:qenu thal is separale frcmq the DVD player's menus. The disc of the titles and chapters or it may allow you to change features settings. Although the content and operation of disc _:qenus vary example gives you an idea of what to expect.
Connections _ Using the On-Screen S_'_up Options Menu "II_e on-screen Options Menu contains many playback features. Press the DVD OPTIONS button on the remote while a disc is playing. Each l_ature is illustrated wilh an icon. Use the up or down arrow button on lhe remote to highlight lhe icon. Note: Either up or down arrow button allowsyou to highlight an icon.
Using the Remote Control Chapter Overview: • The Buttons on the Remote Control • Programming the Remote to Operate • How to Use the Remote • How to Order • Code List Changing a New After Remote Entertainment. Graphics used within this publication You've Other Components Programmed It Control .n. are fi_r repre.;entation only.
Using _h_ R_@_ C@n_lr@! The Buttons on the Remote Control Your backlit channel don't remote has a light button up and channel press down any buttons that glows (CH +/-) for several L.E.D. in the dark. and volume seconds, Press this button up and down the light turns off to conserve Component DVD button to light the (VOL )buttons. battery If you power. Buttons Use this button to set the remote to operate lhe DVD player.
Using Coheir@! Repeatedly press to select tuner or line inputs (LINk'I lbr the rear LINE IN/IN1 jacks, LINt_221k)rthe front VIDEO, L/MONO, R jacks, or DVD). If you are watching "IV, press INPUT to tune to the VCR and play a "tape. LoE.D. (light-emit|ing diode) "II_e little light on lhe remote that lights when you are programming the remote. It also lights when you press a valid button on the remote.
Using C@n lr@! L.E.D. DVD Player Function Buttons Press I-)VD to place the remote in the I-)VD mode when playing DVI-)s, Cl-)s or MP3s. "I]_e function of the button varies with the type and content of the disc played. f DVD REPEA VCR2 SAPCABLE & &°& & MUTE SOUND 0-9 (Number buttons) numbers, track numbers, Use to directly and time. _ R£TURN _ information such as chapter Arrow buttons Use the arrow buttons (left, right, up, and down) to move through on-screen menus.
Using SOUND Use this button to display available audio for lhe type of disc that is playing. SPEED-ZOOM STOP Coheir@! Use to zoom in on the picture when playing DVD discs. Stops disc play. SKIP-TITLE Allows you to see the title and other options available on the current disc (if the disc contains the options). VIEW Allows you to switch to a TV program C5_ or a recording channel, if you are recording.
Using 3. Coheir@! Press PLAY (lhe light on |he remote starts flashing). "II_e remote is searching lhe first set of component codes (there are 20 sets of codes). If the component you want to operate doesn't/urn off"automalically alter 5 seconds, press PLAY again (the light starts flashing again as the remote searches through lhe next set of codes). Continue pressing PLAY until lhe component/urns Note: If the componentdoesn'tturn off after component can't be programmed. off.
Using Coheir@! Code List VCR AdmiraI ........................................................................ 2131 Adventure .................................................................... 2026 Aiko ............................................................................. 2027 Aiwa ................................................................... 20(}2, 2026 Akai .......... 2003, 2004, 2(}05, 20(}7, 2008, 2111,2112, 2¸[13 American High ...........................................................
(This page intentionally left blank)
Using the TV/VCR/DVD's Features Chapter Overview: • Parental Controls and V-Chip • Recording Features • Picture Search Options • Audio Features • Disc Playback Features Using the Remote Changing Graphics used within this publication are fiJr rq>resentation only.
Using C DVID s Parental Controls and V-Chip MENU TIME VIDEO ADJUST AUDIO ADJUST CLOSED CAPTION TIMER RECORDINGS LANGUAGE SETTING _V-CNIP BLOCK The V-CHIPBLOCKfeamre allows you to program your TV so that children can't see certain progra1:qs or channels.
Using Age-Based Rating C DVID s Description and Content Themes for Age-Based Ratings Mature Audience Only. Specifically designed to bc viewed by adults and may bc unsuitable under 17. It contains one or more of the following content themes: crude indecent language sexual activity (S), or graphic violence (V). TV-MA for children (L), explicit Parents Strongly Cautioned. Contains some material that many parents would find unsuitable fbr children under 14.
Using C DVID s F a' ufr@s 5. V-CHIP BLOCK MPAA wTV GUIDELINES Press the up or down aITOWbul|ons to select the age-based contents that you want to block, and press the OK bulton. Note: All TV-Y7 wAGE 6. BLOCK D -- L -- S -- V -- FV SELECT PREVIOUS -_A -_, /v : : and contents are automatically blocked. When _lle desired rating screen appears, press the up or down arrow butlons and OK button to BLOCKor unblock (--) the age raling and any content rating you are allowed to set.
Using MPAA Rating C DVID% Limit "II_e MP_ menu lets you decide which movies can and can't be viewed according to the agebased rating of the MPAA. The TV/VCR/DVD locks and unlocks the parental control settings using a password you select. If you only want your child to watch movies that have a PG rating and lower (in other words, movies rated PG and G), then you could automatically block out all oilier movies with higher ratings. Press TV MENU on ll_e remote to display ll_e main M/_2VU. i.
Using C DVID s MENU TIME VIDEO ADJUST AUDIO ADJUST CLOSED CAPTION TIMER RECORDINGS LANGUAGE SETTING ,V-CHIP BLOCK INPUT SECRET Download New Rating System You can choose to download system SELECT PREVIOUS additional set according new rating systems. to the ratings you The new have previously rating chosen. Press TV MENU on the remote (lhe main M/_2VUappears). 2. Fress the up or down arrow button to select V-CHIPBLOCKandpressOK (1NPUTSECRt_;'TNO. menu appears). 3.
Using Recording C DVID s Features "II_e VCR provides several different ways to record programs. The following pages explain how to use the types of recording features. If you're using the remote control, you must press the VCR button to put the remote control in VCR mode. Recording STOP Speeds Press SPEED on lhe remote to select a recording speed. • SP (Standard Play) gives the best quality recording; consequently, fewer progrmns can be recorded on the "tape.
Using C DVID s F a' ufr@s One-Touch Recording Use OTR to quickly record the remaining portion way to capture the end of a sporting event that runs long. OTR works in 15 minute increments. \f STOP / 9:50AM /j -- of a program being has run into overtime watched. OTR is a great or a live broadcast that 1. Make sure the clock is set and insert a tape wilh the safely tab in place. 2. Press the VCR button and select the channel 3.
Using REC ,1 TIMER nODE CH 10. Insert a tape with safety tab intact bet5re PROGRAM START TIMER button STOP DAILY 10 4:30PM 6:30PM SP 2 MON-FRI 58 IO:OOAM 11:30AR EP 3 56 11:30AM I:20PM SP 20(SAT) C DVID s panel v COMPLETE NEXT CHANGE DELETE SELECT PROGRAM TO DELETE 11. For a cable SELECT PREVIOUS 10:20AM OCT*I5(MON) : SET -_" OK : QUIT-_'MENU -_- A / v -_- 4 when a timer recording is set.
Using C DVID s F a' ufr@s Copying and Editing Tapes Use another VCR. VCR or camco_er Note: The unauthorized rights of others. as the playback recording of television VCR and the TV/VCR/DVD as _e recording programs and other materials may infringe upon the 1. Turn on the VCR or camcorder and lhe "I_/VCR/1-)VD. 2. Press INPUT on the TV/VCR/DVD's remote to select lhe con'ect line input for the device you have connected (LINE 1--back LINE 1N 1 jacks, L1NE2--front iacks). 3.
Using C DVID s Picture Search Options "II_e most basic way to search during playback is using the FORWARD or REVERSE buttons. section contains several other options available for searching a tape. This Frame Advance Prame advance allows you to view one-stop action t)'ame after another during playback. 1. Press PAUSE during playback to freeze the action. 2. Press PAUSE again each time you want to view the next frame of the scene. 3. Press PLAY to return to normal playback.
Using C DVID s F a' ufr@s Tracking Your "lW/VCR has automatic tracking which removes streaks and "noise" from the picture. "IYacking has no effect when recording - only during playback. Automatic tracking is activated when you insert a tape or turn on the TV/VCR. TRACKING flashes on lhe "1_ screen during automatic {racking. Occasionally you may need to manually adiust tracking, especially if the tape was recorded on a different VCR.
Using C DVID s Reception Some TV programs are broadcast with stereo audio or a Second Audio Program (SAP) which offers a second language. "II_e SOUND button on the remote lets you select the type of audio you want to listen to or record. Press the SOUND button on the remote repeatedly to switch between STEREO or SA,r_ • STEREO Used to hear/record normal or stere() broadcast when stereo is being broadcast. SAP stereo Used to heaffrecord is being broadcast. "IV.
Ms ng C DVID s F a' ufr@s Disc Playback Features Using the Remote You can use the re1:qote control to activate disc playback features. Playback features aren't usually available during the opening credits of a _:qovie. If a playback feature isn't available, invalid symbol _ appears on ll_e screen when you press that button. Fast Motion To scan through Playback (Picture the Scan) the disc when you're playing it, use the Picture Scan feature. 1.
Using C DVID s Zoom You can zoom in on the picture. 1. Press SPEED-ZOOM to zoom in on the picture. "II_e ZOOM indicator appears screen. 2. Press SPEED-ZOOM again to increase the zoom. the zoo1:qed area up, down, leli, or right. You can use the arrow on the TV buttons to 1:qove Notes: The zoom indicator turns red when you cannot perform the selected zoom operation. When playing a pan and scan disc, only two zoom levels are available The zoom image may become distorted. 3.
(This page intentionally left blank)
Playing Chapter Discs Overview: • Playing DVDs • Playing Audio CDs • Playing MP3 CDs Changing Graphics used u ithin this publication are fi_r representation only.
IPIMay ng ID scs Playing DVDs For basic information about loading and playing discs, go to page 20 in Chapter 1. "II_ischapter gives you the details about the on-screen DVD Options, how to play audio CDs and MP3 discs. Selecting a Title Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title). Each title is divided into chapters. To select a title: 1. While the disc is playing, press DVD OH'IONS. 2. If 3.
IPIMay n9 ID scs iiiiiii_ ....... Selecting a Time Location You can skip to a specific time on the DVD by using the Time Location Feature. 1. While the disc is playing, press DVD OH'IONS bring up the options menu. 2. If isn't highlighted, press the up or down arrow button to highlight it, and press OK. 3. Use the number (0-9) buttons to enter the time location on the DVD you want to go to. 4. Press OK on the remote to start playing the DVD at the time location you have selected.
IPIMay ng ID scs .... Changing the Audio Audio is recoMed in several ways on DVDs, including multi-channels (used for w)ice-overs in other languages), Dolby Digilal (5.1ch), DTS, and Linear PCM. If you change the disc audio, make sure you also change to llle same audio option within the DVD Setup Menu (details on page 64). • Choose Dolby Digital if you connected • Choose DTS if you connected • Choose LCPM if you connected a Dolby Digital receivei: a DTS receiver or decoder. a PCM only decoder.
i_ ¸ _ _:_ _ , cz; _ _ _ -_ _, - Changing the Digital Gamma Setting "_%ucan use this i'_ature to enhance of the image. 1, viewing by brightening darker areas While the disc is pla_qng, press the I_VD OVIIONS button on the remote, 2, Press the up or down arrow button to higl_Iight _ If digital gamma is not available (_XX) and press OK. is displayed.
IPIMay ng ID scs Playing Audio CDs Your DVD player has many of the same features as an audio CD player. This section explains to play audio CDs in your DVD player and how to use lhe player's features. Disc Playback You can use |he Features how Using the Remote remote control to activate disc playback features. playback feature isn't available, the invalid symbol _ screen when you press that button.
IPIMay n9 1. While a disc is playing, press REPEAT on the remote. The _ screen. (repeat icon) appears ID scs on the TV • Press the REPEAT button once and press the PLAY button to repeat the track lllat is playing. • Press the REPEAT button twice and press llle PLAY button to repeat the disc lllat is playing. • Press the REPEAT button dlree times and press lhe PLAY button when you reach lhe start of llle section you want to repeat.
IPIMay ng Playback Features You can use the remote available, ID scs Using the Remote control to activate disc" playback features. the invalid symbol _ If a playback feature isn't appears on lhe screen when you press that button. Pause 1. Press the PAUSE button when a disc is playing to pause the disc'. 2. Press |he PLAY button to resume normal playback. Track (File) Advance 1. While a disc is playing, you can go forward a track (t_le) at a time by pressing SFJP-TH'LE on the remote. 2.
Using Chapter the Menu Overview: • How to Use Your Menu System • Time Menu • Video Adjust Menu • Audio Adjust Menu • Language Menu • Setting Closed Caption Modes • Additional • DVD Menu System Setup Features Changing Graphics contained System Entertainment. within this publication .n. are fiar representational pu*poses.
Using Syst@ How to Use Your Menu System The V-CHIP BLOCK 1:qenu and the TIMER I¢ECOR1)INGS menu were explained in Chapter 3. This Chapter explains lhe rest of the menu system. Use lhe buttons on the remote to access lhe menu system and make changes to the settings. To highlight or point to an item on the screen, press the aITOWbuttons on lhe re1:qote (the triangular icon *:qoves). To select an ite*:qor activate a choice, press lhe OK bulton.
Using To Set the Clock: TIME TIMER _CLOCK l. Display the TIME menu, use llie tip or down arrow to select CLOCK Sk"I_ and press OK (flie CLOCKSETscreen appeai:s). • Automatic Clock Set ON and press OK. SET CLOCK _AUTO EDS SET CLOCK CH MONTH DAY YEAR TIME ON AUTO The triangular icon moves to EDS CH. If you know the EDS channel in your area, use flie up and down arrows to enter the number or select AUYOand press OK. ----.... SELECT PREVIOUS -_ A /. -_4 Turn off the power.
Using Syst@ Audio Adjust Menu MENU TIME VIDEO AUDIO EQUISOUND Displays a choice list that allows you to turn on or off the change of sound during a commercial break. ADJUST ADJUST AUDIO ADJUST EQUISOUND OFF ,BASS ON allows you to have the volume of the audio remain constant during program changes and commercial breaks. OFF allows you to have the volmne of lhe audio change during program changes and commercial breaks. BASS Increases TREBLE BASS ,9 n or decreases Increases the bass.
Using 4. Press TV MENU to exit. Setup Features Use the FUNCTION menu to set up your TV/VCR/I-)VD t_r your personal preferences. You can turn energy saving on or off, select a blue screen when there is no signal from a channel or a blank portion of tape is playing, or choose to play a tape repeatedly. ENERGYSAVE This feature reduces the brightness of the picture, lowering the power consumption of your "IW/VC1UDVD by approximately 20 percent. The t;2VPLT,'GYSAVEfeature is set to ONat the factory.
Using Syst@ TV MODE TV TV SETUP MODE: MODE TV SETUP TV MODE The TVMODEI_:amre adjusts the way a movie appears on your "IV. Standard TVs are 4 x 3 format. You can adjust the 2_MODEt'or lhe way you want to watch movies. 1. Press the DVD SETUP button to display the setup menu. 2. Press the up or down arrow button to highlight and press OK to display the available modes.
Using Set Parental Limits The PARENTAL SETUt _menu lets you set viewing limils according to a movie's ruling or contents. Some discs are equipped wilh a ruling feature that rates the disc according to the content. So1:qe discs let you edil out scenes and replace them with scenes suitable for children. You can also set the locking feature so any discs beyond the rating you select cannot be played. PARENTAL SETUP 1. Press the DVD SETUP bulton 2. Press the up or down icon), 3.
Using Syst@ "II_e compression l_:ature allows you to raise (or normalize) lhe audio level of a DVD. You can also select the type of digital output while playing a DVD recorded in Dolby Digilal (5.1ch). AUDIO Turn Compression SETUP On or Off 1. Press the DVD SETUP button to display the setup menu. 2. Press the up or down arrow button to highlight lhe ._ icon), and press OK. 3. Press the up or down arrow button to highlight COMPRESSION, and then press OK. 4.
Using DISC LANGUAGE Select the Disc Language AUDIO: You can change so_:qe disc's subtide, audio, and menu languages. must be recorded wilh dc_elanguage for it to be available. ENGLISH ENGLISH DISC LANGUAGE ENGLISH CHINESE SPANISH SWEDISH __ DUTCH DISC i_ 1. Press the DVD SETUP bulton to display lhe setup menu. 2. Press the up or down arrow button to highlight lhe _ and press OK. 3. Press the up or down arrow button to highlight SUI3 _IITLE,and then press OK. 4.
Using Syst@ Disc Language Codes AA Afar FY Frisian MG Malagasy SL SIovenian AB Abkhazian GA Irish MI Maori SM Samoan AF Afrikaans GD Scots Gaelic MK Macedonian SN Shona AM Ameharic GL Galician ML Malayalam SO Somali AR Arabic GN Guarani MN Mongolian SQ Albanian AS Assamese GU Gujarati MO Moldavian SR Serbian AY Aymara HA Hausa MR Marathi SS Siswat AZ Azerbaijani HI Hindi MS Malay ST Sesotho BA Bashkir HR Croatian MT Maltese SU Sundanese
Other Chapter Information Overview: • Troubleshooting • The Front of Your TV/VCR/DVD • Back Panel Jacks • Care and Cleaning • Limited Warranty • Finding the TV/VCR/DVD's • Accessories • Index Video Line Input Channel Changing Graphics used within this publication are fi_r repre.;entation only.
Troubleshooting Most problems the Troubleshooting list that lk)llows. Something might be wrong with your remote control. Press the POWER button on the front of the TV/VCR/DVD. turns on, check the remote control solutions on page 67. if the TV/VCR/DVD General you encounter wilh your TV/VCR/DVD TV/VCR/DVD TV/VCR/DVD won't turn on Make sure the TV/VCR/DVD Check the wall receptacle don't is plugged on the remote: TV, VCR DVD, and ON-OPE in.
Sound okay, picture poor TW adjusting sharpness The energy-save fi.mction to improve, weak signals. Go to page 57 for instructions. fbature might be on. Go to page 59 for more inf_)rmation. Check antenna connections. Make sure all of the cables are firmly connected to the jacks. Can't select certain channel Channel may be blocked or not approved in the V-CHll) BLOCK menu. Clock is wrong Power interruption. Need to reset the clock. Go to page 57 f_0imore information.
Tape won't play If"youre Make using sun, or record the remote a videotape Eject and reinsert The tape Check The prvss has bven VCR to put the rvmotv in VCR mode bvf_:)re you press PLaY or RECORD. inserted. tapv. might be broken to soy if the safety TV/VCR/I)VD Time counter control, might -- tl T another tab ires bern by in pause tape. removed. mode. Press If" it has, the TV/VC_I)VD PLAY on the remote will to return not record. the tape to play mode.
VCR Recording PROGRAM Problems EVENT indicator on front There might have been a power of TV/VCR interruption. is flashing Check the clock for time and date setting. Go to page 36 for more information. A timer program has been set and you turned off the TV/VCR but you haven't safi, ty tab removed. Go to page 38 for instructions.
The Front of Your TV/VCR/DVD TV/VCR Controls I I-I--I--I-I © @@@ .... ;-=I DVD Player Controls Remote control sensor POWER Button Turns the TV/VCWDVD on or off. Power Indicator Lights when the power is on. PHONES (Headphone Remote Sensor Jack) Connect headphones (not supplied) to this jack. Receives signals from the remote. Aim remote at this sensor wilh no objects between them.
PAUSE PLAY Press once to pause playback. Press again to advance one frame. Press PLAY to return to playback. Press once to begin playback. PROGRAM EVENT Indicator Lighl_swhen a timer program has been set and a casselte wilh the safely lab is in lhe TV/VCR. Also flashes when a timer recording has been set and the TV/VCR is turned off wilh no cassette inserted, a cassette without the sal)ty tab has been inselled, or there has been a power interruption.
Care and Cleaning Maintenance of TV/VCR/DVD Cabinet CAUTION: Turn OFF your TV/VCR/DVD before cleaning. You can clean the TV/VCR/DVD as required, using a soft lint-fi'ee ventilation slots in the cabinet to help assure adequate cloth. Be sure to occasionally dust the ventilation. The "lW/VC1UDVD screen may be cleaned with a soft, lint-flee clolh as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened wilh warm water.
Handling Discs • Don't touch the disc's signal surfaces. HoM by the edges or by one edge and the hole in the center. • Don't affix labels or adhesive • Do not use damaged Cleaning (cracked tape to label surfaces. Don't scratch or damage or warped) the label. discs. Discs • Dirty discs can cause reduced vMeo and audio performance. Always keep discs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter.
Limited Warranty What your warranty • covers: Defects in material or workmanship. For how long after your purchase: • One year from date of purchase for labor charges. • One year from date of purchase • Two years from date of purchase tbr parts. for picture tube. The warranty period for rental units begins with the first rental or 45 days from date of shipment whichever comes first.
Product • registration: Please complete and mail the Product Registration Card packed wilh your TV/VCR/DVD. It will make contact you should i_ ever be necessary. The return of the card is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. it easier ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED.
Finding the TV/VCR/DVD's Video Line Input Channel You need to tune your TV/VCR/DVD to the video line input channel if you're using the AUDIO/ VIDEO (A/V) IN jacks to connect other components (such as a cable box, another VCR, or satellite receiver). You must select the "lW/VCR/DVD's video line input channel before you can see the vide() and hear the audio from another component you have connected to these jacks. To access lhe video line input: & &°&/_ \1_1/ INPUT button __ 76 _0'0 _0 • Press INPUT to
Accessories Accessory Order Form Description Screw-on the rot_d connecto_ VH81 (3-ft) VH82 (640 CaOle attache* to antenna (called 75-ohm a Seclgrg¢ VH89 (6-ft) Screw-on antenna cabte (6-ft) ¢H82 $4,95 ¢H89 $5,95 VH83 $5,95 ¢H84 $9,95 2-way Signal Sptitter ¢H47 $3,95 Antenna 193984 $11.15 255353 $34.95 228449 $4,45 cable (6-ft) VCR Dubbing Stereo VCR Dubbing COt_lnectio!_.
Chargeyourorder on your VISA, MasterCard,or DiscoverCardby filling in below USEYOUR CREDITCARD IMPORTANT: Copy complete account number from your VISA card My card expires: Remote Control This is the remote &&_&& control ri_al came packed wilh your TV/VCR/I)VD Replacemen_ or._pares can be ordered as needed.
Index Symbols 16 x 9 Widcscreen 60 4 x 3 Lenerbox 60 4x3 Pan and Scan 60 A A-B Repeat 45 Accessories 77 Add/erase channels 16 Age-Based Ra_ing 33 Age-Based Ratings 35 Angle, camera 49 AN'ITCABLE jack 10, 11, 71 Arrow buttons 24, 26, 58 Aspect ratio 60 Audio 50 A-B repeat 52 disc repeat 52 Dolby Digital 12 track repeat 52 Audio Adjust menu 58 Audio equipment Dolby Digital 12 Audio features 42 Audio/video jacks 11, 13, 71 Auto channel search 15 B Back Panel jacks 71 Back-lit remote 24 Balance 58 Bass 58 B
Maintenance 72 Menu Audio Adiust 58 Language 58 Time 56 Video Adjust 57 MENU button 16 MP3 disc repeat 54 playback fL'atures 54 track repeat 54 MP3 discs 53 MPAA 32 age-based rating 35 rating limi_ 35 MUTE button 25 N Number buttons 24, 26 o OK button 15, 25, 26 ON*OFF button 25, 26 One-touch recording 38 OPEN/CLOSE button 70 OPllCAL DIGITAL OUT jack 12, 13, 71 P Pan and Scan 60 Parental controls 32 Password 33 PAUSE button 17, 25, 26, 37, 71 Picture adjust 57 Picture scan 44 Picture search options 41
Video Adjust menu 57 Vide() input channel 76 VIEW button 27 Virtual I)olby 50 VOL buttons 70 VOL+ button 25 VOL- button 25 W Warranty 74 Widescreen 60 Z Zoom 45 81
Visit the RCA web Please do not send any products to the Indianapolis add delays in service for your product. Thomson multimedia 10330 North Meridian Indianapolis, site at www.rca.com address listed in this manual or on the carton. This will only Inc. Street IN 46290 ©2001 Thomson multimedia Trademark(s)® Registered Marca(s) Registrada(s) Printed in Malaysia TOCOM 15775960 Inc. "n.