User Manual Model: J32BE220 Before connecting, operating or adjusting this product, please read the manual completely. . Please keep this manual for future reference.
Table of Contents English Important Safety Instructions .......................................................................................................1 Important Notice .............................................................................................................................4 Preparations ....................................................................................................................................5 Identification of Controls ...............................
Important Safety Instructions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
Important Safety Instructions (Continued) 12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting inserious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions.
Important Safety Instructions (Continued) 22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.
Important Notice About Temperature Do not use in hot and cold rooms (locations) ● When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ● Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the to malfunction.
Preparations Using the Remote Control ■ Use the remote control by pointing it towards the remote sensor window of the set. Objects between the remote control and sensor window may prevent proper operation. 16 feet Cautions regarding use of remote control ■ Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. ■ Do not install or place the remote control under direct sunlight.
Preparations (Continued) Antenna Connection INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimal picture reception requires good signal and will generally mean that an amplified antenna must be used. The exact type and position of the antenna will depend upon your particular area.
Identification of Controls Main Unit (control panel) VOL+ VOLCH+ CHMENU SOURCE STANDBY Speaker 1. STANDBY Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to STANDBY. 2.SOURCE To access INPUT SOURCE menu 3 . MENU Press this button to access the menu main page. 4 . CH+/Press these two buttons to directly change the TV channel; In menu operations, these buttons serve as up/down buttons. 5 .
Identification of Controls (Continued) Main Unit (connectors) 12 11 10 9 8 1 2 3 4 5 6 7 1.POWER CORD-Main power input. 2.COAX-Connect the SPDIF receiver. 3.RF-This connection is for digital or analog cable without the cable box or over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital channels. This connection uses coaxial RF cable. 4.VGA - This connection port connects to a PC for video using VGA cable.
Identification of Controls (Continued) Remote Control Unit ON.OFF 1 2 3 2 SYSTEM 1 4 6 5 3 SOUND 7 9 8 SKIP 4 SLEEP GUIDE 0 5 7 CC GO BACK 8 CH+ 6 9 MUTE 10 VOL- VOL+ CH12 11 INPUT MENU ANTENNA p OK INFO 15 16 13 t q u 14 CLEAR 17 R130K1 1. NUMBER BUTTONS Selects channel numbers. 2.ON-OFF Switches the set on or off. 3.SYSTEM Unused. 4.SOUND Recalls your preferred sound setting. 5.SKIP Unused. 6.SLEEP Sets the sleep timer. 7.GUIDE Display “Channel List” Menu. 8.
Connections Cautions Before Connecting ● Carefully check the terminals for position and type before making any connections. ● The illustration of the external equipment may be different depending on your model. ● Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. ● Refer to the operating manual of the external device as well. ● When connecting an external device, turn the power off to avoid any issues.
Connections (Continued) Connecting Component Video TV REAR Component video cable Cables are often color-coded to connectors. Connect red to red, white to white, etc. To connect a device using component video: Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Cb/Pb, Cr/Pr output jacks on the device . Connect the Audio cable between the AUDIO input jacks on the unit and AUDIO output jacks on the device. To play component video from an external device: 1.
Connections (Continued) Connecting an HDMI device TV REAR Device with HDMI output HDMI cable How to connect a device using HDMI Connection: Connect the HDMI cable between the HDMI interface on the unit and HDMI output on the device. To play from the device using HDMI: 1. Turn on your TV, then press SOURCE button. The INPUT SOURCE menu opens. 2. Press ▲ or ▼to select HDMI, then press OK to confirm. 3. Turn on your device and set it to the correct mode. See the device's user guide for more information.
Basic Operations Turning On/Off the Power ■ Turning On Insert the power cord into the wall outlet. Press the STANDBY button on the unit or the ON-OFF button on the remote control, the unit will be turned on and you will be ready to use its features. ■ Turning Off With the power on, press the STANDBY button on the unit or the ON-OFF button on the remote control to turn off the unit, and put the unit in standby mode. To cut off the power completely, please disconnect the AC power cord.
Getting Started If You've Connected Antenna or Cable to the TV If an antenna or cable (without a cable box) is connected to your TV's tuner, you will need to go through an INITIAL SETUP process in order to watch the TV. 1.Press MENU to open the menu Picture SOUND SETUP CHANNEL PARENTAL OTHERS 2.Use the ◄ or ► button to select the CHANNEL icon and press OK .
OSD (On Screen Display) Options Picture SOUND CHANNEL PARENTAL SETUP OTHERS PICTURE This main option has functions for changing the picture settings for all ports, such as tint, contrast, sharpness. SOUND This main option has functions for changing sound settings for all ports, such as SPDIF Type, treble, bass, and acoustic cinema enhancement….etc. CHANNEL This main option has functions for the tuner port, such as scanning channels, editing channels, specific range scans, audio language, tuner mode….
PICTURE II.SCREEN Size I.SCREEN SIZE This featur changes the various aspects of the TV’s video.(Aspects include Wide,Cinema,Zoom,Normal.) III.PC SETTINGS PC SETTINGS Vertical Position Clock Phase Reset Execute ▲ ▲ :Return ▲ ▲ ▲ ▲ Horizontal Position MENU i.AUTO ADJUST This feature automatically adjusts the picture syncing in with the signal of the PC. Execute ▲ ▲ ▲ ▲ Auto Adjust ii.HORIZONTAL POSITION This feature adjusts the to the left or right position of the PC picture. iii.
SOUND This option allows users to adjust the TV's sound functions. SOUND Sound Settings Surround Mode Analog Sound Stereo English Digital Sound Other Setting Equalizer Settings ▲ :Return :Move ENTER / ▲ ▲ MENU :Go to Next Menu 1.Press MENU to open the OSD. 2.Press ◄ or ► to select SOUND and press OK. 3.Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or OK to adjust them. I.SOUND SETTINGS ▲ ▲ ▲ ▲ ▲ ▲ SOUND SETTING Sound Mode Standard Bass Treble Balance i.
SOUND VI.EQUALIZER SETTINGS This feature enables the internal equalizer of the speakers. You can adjust the settings individually or use the presets (user, off, rock, pop jazz). Equalizer SETTINGS Mode POP -1 100 250 500 ▲ :Return :Move 3 1 1K 2K ▲ ▲ MENU 2 ▲ -2 0 -1 10K 4K :Change Setting CHANNEL This option allows user to adjust the TV's tuner functions. CHANNEL Channel List 1.Press MENU to open the OSD. Channel Setting 2.Press ◄ or ► to select CHANNEL and press OK.
CHANNEL II.CHANNEL SETTINGS CHANNELSETTINGS Channel Page 1/1 Label Skip C2-1 A3-2 A4-6 A5-7 ▲ ▲ :Return :Move ▲ MENU ▲ B2-4 :Page ENTER :Select Channel III.SIGNAL TYPE This feature allows you to switch between air (such as using antenna) and cable. IV.AUTO CHANNEL SEARCH This feature searches channels automatically for you. AUTO CHANNEL SEARCH-Air Now Searching.... Please Wait...
SETUP This option allows user to adjust the TV's miscellaneous options. SETUP Closed Caption Menu Language Clock 1.Press MENU to open the OSD. English 2.Press ◄ or ► to select SETUP and press OK. 3.Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or OK to adjust them. ▲ ▲ :Return :Move ENTER / ▲ MENU :Go to Next Menu I.CLOSED CAPTION This provides your TV tuner, AV ports with subtitles. i.CAPTION DISPLAY This turns on or off the closed captioning. Ii.
OTHERS This option allows users to set other features of the TV. OTHERS Bue Back No Signal Power Off 1.Press MENU to open the OSD. No Operation Power Off 2.Press ◄ or ► to select OTHERS and press OK. All Reset :Return ▲ ▲ MENU :Move Execute ENTER 3.Use ▲ or ▼ to select the one you want to adjust and ◄ or ► or OK to adjust them. :On/Off I.BLUE BACK This feature gives the TV a blue default background when there is no signal. II.
USB (Multimedia) Menu The TV is a widescreen TV with an USB port. With the USB port the TV can access USB flash drives (up to 2GB) and display pictures or play MP3 files. To use this feature connect a USB flash drive to the USB port of the TV and press the INPUT button to select USB source to start browsing for music and pictures. Once you select the USB input source the USB menu will come up. Select either the music or picture you want to browse using the arrow buttons.
Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your television, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Remote control does not operate Possible Solutions ● The ● ● batteries could be weak. Replace the batteries. Check the orientation of the batteries. Make sure the power cord is plugged in.
Troubleshooting (Continued) General Problem One or some channels can't be displayed Possible Solutions ● These channels may be blocked. Please unblock them (see section). ● These channels may be set hidden. You may set it to show or select them with 0-9 number buttons.
Specifications Panel 32 inches 0.51075 (H) x 0.51075 (V) 1366 x 768 16 : 9 16.7M colors 3000:1 330 7 ms 176 (H) / 176(V) 50,000 hours TV/AV/YPbPr/HDMI1/HDMI2/HDMI3/PC STANDBY, SOURCE, MENU, CH-, CH+, VOL-, VOL+ 100-240V~ 10w + 10w Dimensions 779 x 545 x 205 mm Weight 9.5 Kg Note: 1. Design and specifications are subject to change without notice. 2. Weight and dimensions shown are approximate. 3. Specifications and external appearance may be changed for the sake of improvement.
Wall mounting operation Place the TV’s neck on the base and screw the screws as shown below.
