owner’s manual Compact Disc Changer
INTRODUCTION Your Compact Disc Changer has these great features. 301 CD Giga Changer — the new roulette-type mechanism allows for a capacity of 301 CDs. Single Loader Slot One-disc Jump-in Playback — lets you easily play a disc that is not loaded in the rack. Priority Key — provides excellent operability of the jump-in play function. Plays regular, CD-R and CD-RW Compact Discs — lets you play recordable as well as regular CDs CD TEXT Compatible — displays disc titles while playing CD TEXT discs.
IMPORTANT SAFETY INSTRUCTIONS This CD Changer is made and tested to meet exacting safety standards. It meets both UL and FCC requirements and complies with safety performance standards of the US Department of Health and Human Services. Careful attention is devoted to quality standards in the manufacture of your CD changer, and safety is a major factor in its design. However, safety is also your responsibility.
PREPARATION SUPPLIED ACCESSORIES 1 Remote Control POWER HI-LITE PREVIOUS REPEAT MODE PROGRAM CLEAR 1 2 4 5 7 8 9 DISC SET 0 TRACK SET 3 1 Audio Cable 1 Control Cable BEST DISPLAY 6 2 DISC 3 1 SEARCH ¡ 7 8 4 ASMS ¢ 3 RANDOM COMPACT DISC CHANGER OSR SYSTEM REMOTE REMOTE CONTROL UNIT BATTERY INSTALLATION Dry Cell Batteries (not included) (AA size x 2) Incorrect use of batteries may cause leakage or rupture. Always follow these guidelines: A.
CD LENS CLEANER The changer’s pickup lens should not become dirty in normal use. RadioShack offers cleaning kits for CD lens. CLEANING AND HANDLING COMPACT DISCS • Fingerprints or smudges on a CD’s surface might not directly affect the recorded signals, but might cause degradation of sound quality. Keep your discs clean by wiping them gently with a soft cloth from the inner edge toward the outer periphery. RadioShack offers a variety of cleaning kits for CDs.
CONNECTIONS Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. Stereo Amplifier CD-DECK SYNCHRO CONTROL OUT DIGITAL OPTICAL IN Red CD R L R L White Control Cable To the CONTROL IN Jack of the Component Bearing the OSR Mark.
NAMES OF PARTS FRONT PANEL DISPLAY & Number buttons 0@ REPEAT # PROGRAM % Jog Dial 9! ENTER ! CLEAR @^ Hood 9 MODE 0@ CD TEXT CD-9500 COMPACT DISC CHANGER DISC STAND BY Indicator MODE TRACK CLEAR PROGRAM MIN 1 2 3 4 5 6 7 8 9 DISC 0 TRACK DISC PUSH ENTER SEC REPEAT ASMS/SEARCH RANDOM DISPLAY CD-FILE 301-DISC STAND BY POWER Track/Manual Search Button (forward direction) (¡¢) 0! RANDOM $ SINGLE PLAY OSR PLAY/PAUSE ACCESS POWER Track/Manual Search Button (reverse direct
REMOTE CONTROL 1 HI-LITE ^ 1 2 q w 3 4 POWER HI-LITE PREVIOUS REPEAT MODE PROGRAM CLEAR 5 6 7 8 1 2 3 4 5 6 7 8 9 DISC SET 0 TRACK SET BEST DISPLAY y 2 DISC 3 1 SEARCH ¡ 7 8 4 ASMS ¢ 3 u i o RANDOM 9 COMPACT DISC CHANGER OSR SYSTEM REMOTE p e r t ; a 2 POWER 90 3 MODE 0@ 4 5 6 7 8 REPEAT # Number Buttons 0@ DISC SET 0% Fast Forward (¡) 0 Fast Reverse (1) 0 9 Stop (7) 0$ p Pause (8) 0 q PREVIOUS $ w BEST # e PROGRAM % r CLEAR @^ t y u i o ; a DISPLAY & TRACK SET 0% DISC
HOW TO LOAD THE DISCS 7 Note: Read this before using the CD changer. LOADING DISCS INTO THE RACK • You can load up to 300 discs in the rack. The numbers marked on the rack are used as the disc numbers. These are marked in a clockwise order from 1 to 300. • To load discs beginning from disc Number 1: 1 STAND BY Press POWER. POWER 2 POWER 1 2 3 4 5 6 7 8 9 DISC SET 0 TRACK SET DISPLAY Ensure that the disc Number. shown on the display is 1.
OPERATIONS Note: You can also use the remote control. DISC TRACK MIN CLEAR PROGRAM 1 1 1 2 2 3 3 4 4 5 5 6 6 DISC REPEAT 7 7 8 8 9 9 DISC DISC 0 0 TRACK TRACK ASMS/SEARCH RANDOM DISPLAY CD-FILE STAND BY Indicator STAND BY POWER OSR SINGLE PLAY PLAY/PAUSE ACCESS OPEN/ CLOSE PLAY UNLOAD 6 STOP 7 DISC 7 1 STAND BY 1/¡ PLAY/PAUSE • If you choose a play mode beforehand, the tracks/discs play according to the respective play mode.
2 DISC MODE 1 TRACK CLEAR PROGRAM MIN Jog Dial 1 2 3 4 5 6 7 8 9 DISC 0 TRACK DISC PUSH ENTER REPEAT ENTER SINGLE PLAY PLAY/PAUSE ACCESS PLAY OPEN/ CLOSE UNLOAD 6 STOP 7 41/¡¢ 7 3 Use the single loader slot to play discs that are not loaded in the rack . SINGLE 2 3 PLAY 8 9 0 TRACK SET 2 DISC 3 7 7 8 4 ASMS ¢ 3 DISC (2/3) 4/¢ RANDOM 3 To start playback from a specific disc DISC Press SINGLE LOADER ACCESS.
Number Buttons DISPLAY CLEAR REPEAT DISC CLEAR MODE MODE TRACK CLEAR PROGRAM MIN 1 2 3 4 5 6 7 8 9 DISC 0 TRACK DISC MODE PUSH ENTER SEC REPEAT DISPLAY ASMS/SEARCH RANDOM Number Buttons MODE PROGRAM CLEAR 1 2 3 4 5 6 7 8 9 DISC SET 0 TRACK SET DISPLAY DISPLAY CD-FILE STAND BY POWER OSR SINGLE PLAY PLAY/PAUSE ACCESS OPEN/ CLOSE PLAY UNLOAD 6 STOP 7 DISC SET 2 DISC 3 1 SEARCH ¡ 7 DISC (2/3) 4 ASMS ¢ 8 3 RANDOM 3 DISC (CUSTOM play) The changer
REPEAT 1 DISC MODE TRACK CLEAR PROGRAM MIN 2 3 DISC REPEAT 4 5 7 8 9 DISC 0 TRACK POWER HI-LITE PREVIOUS REPEAT MODE PROGRAM CLEAR BEST PUSH ENTER REPEAT SEC 6 ASMS/SEARCH RANDOM DISPLAY 1 2 3 4 5 6 BEST DISPLAY CD-FILE STAND BY POWER OSR 7 8 9 DISC SET 0 TRACK SET SINGLE PLAY PLAY/PAUSE ACCESS OPEN/ CLOSE PLAY UNLOAD 6 STOP 7 2 DISC 3 1 SEARCH ¡ 4 ASMS ¢ (REPEAT play) (BEST play) This operation is available only from the remote control.
DISC MODE TRACK CLEAR MIN PROGRAM 1 2 3 4 5 6 7 8 9 DISC 0 TRACK DISC POWER HI-LITE PREVIOUS REPEAT MODE PROGRAM CLEAR BEST PREVIOUS PUSH ENTER SEC REPEAT 1 2 3 4 5 6 7 8 9 DISC SET 0 TRACK SET DISPLAY ASMS/SEARCH RANDOM DISPLAY CD-FILE RANDOM STAND BY POWER SINGLE PLAY OSR PLAY/PAUSE ACCESS PLAY OPEN/ CLOSE UNLOAD 6 STOP 7 7 6 2 DISC 3 1 SEARCH ¡ 7 8 3 RANDOM RANDOM 3 (PREVIOUS scan) (RANDOM play) • This function scans the discs in reverse o
2 1 1 3 2 REPEAT DISC TRACK MIN CLEAR PROGRAM 2 3 4 5 6 7 8 9 DISC 0 TRACK DISC PUSH ENTER REPEAT 3 5 6 7 8 9 DISC SET 0 TRACK SET 2 3 PLAY/PAUSE OPEN/ CLOSE PLAY 3 2 SINGLE PLAY ACCESS UNLOAD 6 STOP 7 1 SEARCH ¡ 7 7 • The remote control is the most convenient way to perform this operation. You can also press the button between parentheses as indicated below. • You can program up to 36 steps. 4 ( Press PROGRAM during stop mode.
HI-LITE POWER HI-LITE PREVIOUS REPEAT MODE PROGRAM CLEAR 1 2 3 4 5 6 7 8 9 DISC SET 0 TRACK SET BEST DISPLAY 2 DISC 3 1 SEARCH ¡ 7 8 4 ASMS ¢ 3 RANDOM 3 (Pause program) If you press 8 at Step 4 , you can program a pause. When you press 8, PA appears in the display instead of the disc number.
DISPLAY DISC MODE TRACK CLEAR PROGRAM MIN 1 2 3 4 5 6 7 8 9 DISC 0 TRACK DISC POWER HI-LITE PREVIOUS REPEAT MODE PROGRAM CLEAR 1 2 3 4 5 6 7 8 9 DISC SET 0 TRACK SET BEST DISPLAY PUSH ENTER SEC REPEAT DISPLAY ASMS/SEARCH RANDOM DISPLAY CD-FILE STAND BY POWER OSR 2 DISC 3 SINGLE PLAY PLAY/PAUSE ACCESS OPEN/ CLOSE PLAY UNLOAD 6 STOP 7 1 SEARCH ¡ 7 Press 3 (or 6) when you 3 reach the track you want to hear.
TROUBLESHOOTING This CD changer has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your CD changer is not operating as it should, take it to your local RadioShack store or call 1-800-THE-SHACK for assistance. Your CD changer should give you years of trouble-free service. However, if you do have problems, these suggestions might help. Symptom No sound Cause Remedy • Output cables are connected incorrectly or loosely.
SPECIFICATIONS General Type ............................. Compact disc digital audio system Power requirements ................................ AC 120 V, 60 Hz Power consumption .................................................. 12 W Power consumption in standby mode ......................... 1 W Operating temperature ................................ +41°F – +95°F (+5°C – +35°C) Weight ( without package ) .................. 16 lb 9 oz. (7.5 kg) External dimensions ..........................
Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers.
