Manual

Inserting and Removing Cassettes
insert the :'
cassette only
EJECT Switch
one way with ......
Wheel the tape wheel
facing up and
i_e tape win-
facing
out. The
, Tab _i_assette ghouid
Tape Window glide easily
:into the com'
PUSHrIere to p_menL Do.....
Close Cassette
Compartment not force the
Door _a_sette.
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
_ Wheel
1. Attach a power supply. Then slide and
release the EJECT switch to open the
cassette compartment.
2. Insert or remove the cassette.
3. Close the cassette compartment door
by pressing on the area of the cassette
compartment door labeled PUSH until
it locks into place.
Cassette Care and Storage
• When you are finished with a cassette,
rewind it, and remove it from the
camcorder.
• Label your cassettes before storing them.
• Store cassettes vertically in their
protective boxes at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold may damage
your cassettes.
• Keep dust from entering the cassette
compartment. All dust is abrasive and
will cause excessive wear on the tape
and the camcorder's recording or
playback heads.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape may jam and/or damage your
camcorder.
25