Manual

Playback on TV (or VCR) with In ut Jacks _ ,_,_ _o_>,
P _, _ ,__ ÷__ _
To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,
you will need the audio/video output cable thatcame packed with your camcorder.
If your TV is already connected to a VCR, you can attach the camcorder to the VCR
and watch what the camcorder is recording or playing on the TV.
Back of
Stereo VCR or
TV Monitor
Back of
Mono VCR or (1)r"White
TV Monitor (_Audio/Video
[ "-_ Output Cable __
plied)
OR '"".
Y-Adapter @White ""
(available from
supplyelectronicsstore) Audio @Audio/Video ."'- ]
Plug Output Cable /
(Supphed) ."" /
/_ ."A V (Audio/Video)
." OUT Connector
Yellow Video Plug
Installation
Attach the audio/video output cable's
white plug to the AUDIO IN jack on
the TV (or VCR).
Note: If your TV (or VCR) has stereo
AUDIO IN jacks, attach the white audio
plug to the one labeled MONO. If one is
not labeled MONO, you may need a
Y-adapter to hear both channels.
Attach the audio/video output cable's
yellow plug to the VIDEO IN jack on
the TV (or VCR).
Attach the plug on the other end of the
audio/video output cable to the A V
OUT connector of the camcorder.
Caution! T_ una_th_i_e_ }ee_r_ing
:of copyrighted material may infringe
of others.
the rights ............
Playback Operation and How to Copy
Tapes on the VCR
1. A.Camcorder connected directly to
TV: Turnon the TV and tune it to
the video input channel.
B. Camcorder connected to VCR that
is already connected to TV: Turn
on VCR and place it in the "line" or
"camera mode". (If your VCR does
not have a "line" or "camera
50 (continued on next page)