CC417 USER‘S GUIDE C A M C O R D E R
Important Safety Information Be sure to read all the safety information before you begin to use this product. WARNING: To reduce the risk of fire or shock hazard, do not expose camcorder or AC adapter/charger to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.
Assistance We want to make sure you enjoy your new camcorder. If you have any questions, call: Camcorder Exchange Warranty...... 800-283-6503 (Pages 58-59) Customer Service..................................... 800-336-1900 (Page 57) Accessories......................................... 800-338-0376 (Pages 44-51) Table of Contents Safety Information................................i Product Registration.............................i Contents.............................................
Table of Contents Recording Features • Quick Review....................................19 • Tape Positioning ...............................19 • Microphone .......................................19 • AI (Artificial Intelligence) ................19 • Program AE (Auto Exposure)...........20 • Auto Focus ........................................20 • Macro Focus......................................20 • Electronic Indexing ...........................21 • Time Remaining Display ..................21 • Viewfinder .
First-Time Operation This section describes only the basic steps necessary to set up your camcorder to record. Refer to the other sections for detailed operation and feature options. Assistance The toll-free numbers are available to help you with any problem you may encounter. Camcorder Exchange Warranty . . . . .800-283-6503 Customer Service . . . . . . . . . . . . . . . .800-336-1900 Accessories . . . . . . . . . . . . . . . . . . . .800-338-0376 1. Unpack the camcorder and accessories.
First-Time Operation Adapter/ Charger BA TT ER Y POWE R CHAR GE DC OUTPUT Jack Adapter/Charger’s DC Cable DC IN 9.6V Jack on Back of Camcorder 2. Attach the adapter/charger. Since the battery must be charged before it can be used the first time, attach the adapter/charger to the camcorder. • Attach one end of the adapter/charger’s DC cable to the DC OUTPUT jack on the adapter/charger. 4 • Attach the other end of the cable to the DC IN 9.6V jack on the camcorder.
First-Time Operation POWER (CAMERA/OFF/VCR) Switch and Indicator REW – PLAY SEL TITLE D F.FW + ECT STOP/EJ – ADV EDIT VCR OFF OWER Handstrap G KIN SE AC AU TR C/P RE Lens Cap 3. Remove the lens cap and attach it to the handstrap. 4. Turn on the camcorder. The position of the POWER (CAMERA/OFF/VCR) switch tells the camcorder whether you want to record (CAMERA), play back tapes (VCR), or turn off the power (OFF). • Press and hold the small button on POWER while sliding it in CAMERA.
First-Time Operation Safety Tab Tape Window REC (Record) /PAUSE Button B A T T E R Y Lens Cap on Handstrap Cassette Door Press Here to Close 5. Insert a cassette. • Press STOP/EJECT to open the cassette compartment. • Insert the cassette with the safety tab facing up and the tape windows facing out. • Press the cassette down gently until it locks into place, and close the cassette compartment door. • Details are on page 17. 6 6. Position viewfinder and adjust eyepiece focus control.
First-Time Operation POWER (CAMERA/OFF/VCR) Switch and Indicator STOP/EJECT REW – PLAY SEL TITLE D F.FW + JECT STOP/E – ADV EDIT PLAY VCR OFF OWER REW (Rewind) REC (Record) /PAUSE Eyepiece Eyepiece Focus Control G KIN SE AC AU TR C/P RE Electronic Viewfinder (Grasp Here to Move) 7. Start and stop recording. Start and stop recording by pressing and releasing REC/PAUSE. REC appears in the viewfinder. You do not have to hold the button to record.
First-Time Operation 9. Review the camcorder’s operating controls. REVIEW Button REW (Rewind) Button Also TITLE SEL – Button DISPLAY Button RESET Button PLAY Button Also TITLE SEL Button DATE/TIME Button F.FWD (Fast Forward) Button Also TITLE SEL + Button TITLER Button REVIEW DISPLAY RESET DATE TITLER CAMERA /TIME OFF VCR REW PLAY F.
First-Time Operation 9. Review the camcorder’s operating controls. Shoulder Strap Attachment Ring Shoulder Strap Attachment Ring S HT BRIG BATTERY Eject Lever BAT FOCU BRIGHT and FOCUS Controls Power Zoom Buttons (W and T) also TRACKING Buttons TER Y REC (Record) /PAUSE Button DC IN 9.5V DC IN 9.
Powering the Camcorder Caution: Do not attempt to use a “power converter” to use your AC adapter/charger on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and camcorder may be damaged. If you wish to operate the AC adapter/charger on a power source other than 120 volts, 50/60 Hz, use only a transformer-type power converter. Do not use “solid-state” or “switching-type” power converters. They will damage your AC adapter/charger.
Powering the Camcorder Using the Battery to Power Your Camcorder Charging the Battery The battery must be charged before it can be used the first time. Charging will take approximately two hours depending on the condition of the battery. When fully charged, the battery should supply approximately 60 minutes of operating time (depending on how much you use zoom and pause). To extend the battery’s operation time, turn off the camcorder’s power when not in use. WARNING: LEADACID BATTERY.
Powering the Camcorder Using the Battery to Power Your Camcorder POWER Switch and Indicator BATTERY Eject Switch S HT FOCU BRIG Rechargeable Battery Hold Battery Flush and Slide Down Align Arrows Attach Charged Battery Remove the Battery 1. Align reference arrow on battery with arrow on camcorder. Hold battery flush against camcorder while sliding it down in the direction of the arrow as shown. 2. Press and hold small button on POWER while placing it in CAMERA.
Powering the Camcorder Using the Battery to Power Your Camcorder Battery Care • Your battery will provide better service and longer performance if you charge it before and after use, and store it at normal room temperature. • The battery should be charged at a temperature of 32ºF-95ºF (0ºC-35ºC) to prevent damage. • Do not operate the battery at temperatures below 14ºF (-10ºC) or above 95ºF (35ºC). The battery may be Battery Storage • Store the battery at normal room temperature.
Powering the Camcorder Check Battery Power (Battery Level Indicator) Battery Level Indicator Display in Viewfinder The battery level indicator ( ) always appears in the camcorder’s viewfinder to show how much battery power is left in the rechargeable battery. This indicator is not recorded on the tape. • When the battery is fully charged, the display shows . • After a while, only appears. • When the battery reaches the empty level, will start flashing.
Powering the Camcorder Using the Optional Thomson Car Cord Adapter To power your camcorder from the cigarette lighter socket of a car, truck, or RV, you need the optional car cord adapter DCC096 shown on page 45. The DCC096 car cord is especially designed to convert power from a 12-volt battery to the 9.6-volt input jack on the camcorder. Caution: The DCC096 car cord is designed to be used only with vehicles having 12-volt negative ground electrical systems.
Video Cassettes We recommend that our cassettes be used with your camcorder. Use of poor quality tapes or tapes that have been damaged or mishandled can contaminate the video heads, resulting in a snowy picture or no picture at all during playback. Because there is no control over the type of tape purchased or rented by consumers, head cleaning is not covered under warranty. It is considered normal maintenance.
Video Cassettes Inserting and Removing Cassettes Safety Tab STOP/EJECT Caution: Insert cassette with safety tab facing up and tape windows facing out. Cassette should slide easily into the compartment. Gently push the cassette down until it locks into place. B A T T E R Y Press Here to Close 1. Attach a power source to the camcorder (either a charged battery or adapter/charger). 2. Press STOP/EJECT on the top of the camcorder to open cassette door. Tape Windows 3.
Camcorder Traveling and Cassette Tips Traveling Tips Write down your camcorder’s serial number and keep it separate from the camcorder when traveling. If your camcorder is lost or stolen, you will be able to identify it. Make sure you have any plug adapters you need before taking your camcorder to other countries. Consult your dealer. Carry your camcorder in a carrying case when traveling. See page 44 for a specially designed case.
Camcorder Features STOP/EJECT F.FWD (Fast Forward) REW (Rewind) POWER Switch in CAMERA REVIEW Microphone REW – PLAY SEL TITLE D F.FW + ECT STOP/EJ – ADV EDIT VCR OFF R OWE AC TR /P REC NG KI SE AU Quick Review Microphone Press REVIEW when POWER is in CAMERA and the camcorder is in record pause to review the last few seconds of a recording. The camcorder will play back the last few seconds of the recording, return the tape to its previous position, and return to record pause.
Camcorder Features Program AE (Auto Exposure) Program auto exposure automatically selects the shutter speed and adjusts the iris according to the shutter speed. AE:60 Viewfinder Display The AE indicator for the shutter speed selected (1/60, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000, or 1/4000 second) appears in the viewfinder. Auto Focus The camcorder will focus on the subject in the center of the viewfinder.
Camcorder Features Electronic Indexing Each time you begin recording (after the camcorder has been turned off for at least four hours), the camcorder will automatically record an index mark at the beginning of the new recording. When you play back the indexed tape in a VCR that has a compatible indexing feature called “VHS Index Search System”, the invisible marks can be located automatically. See your VCR owner’s manual for index playback instructions.
Viewfinder The camcorder’s viewfinder is a miniature monitor that displays the picture seen by the camcorder when recording. The viewfinder also can be used for viewing the tape during playback. When carrying or storing the camcorder, return the viewfinder to the original position to prevent possible damage.
Viewfinder Eyepiece BRIGHT and FOCUS Controls BRIGHT FOCUS BRIGHT and FOCUS Controls The small BRIGHT and FOCUS controls are set at the factory and should require no adjustment. If they ever require adjustment, use a plastic screwdriver. Make the adjustments with caution to prevent damaging the miniature controls. Tilt Adjustment For convenient viewing, you can rotate the eyepiece about 225º degrees. Caution: Do not force the eyepiece to rotate completely around.
Displays in Viewfinder 1 AE Shutter Speed AE:60 0000M NO TAPE INDEX 4 Tape Counter 5 Time Remaining 6 Battery Level 7 INDEX Display 8 TAPE, NO TAPE, and TAPE END T 2 Zoom Level 3 Status W 10:30AM REC 11/18/95 Viewfinder Displays 1 AE (Auto Exposure) Shutter Speed The shutter speed selected by the camcorder appears here. It is not recorded on the tape. 2 Zoom Level • The zoom level indicator appears when you press power zoom button T or W. • Details are on page 30.
Displays in Viewfinder DATE/TIME DISPLAY REW – VCR OFF R OWE D F.FW + ECT STOP/EJ – ADV EDIT POWER AC TR /P REC NG KI SE AU Power Zoom Button PLAY SEL TITLE 7 INDEX • TAPE END flashes when you have approximately three minutes recording time left on the cassette. • TAPE END briefly appears when you reach the end of the cassette during recording. • These displays are not recorded when they appear. INDEX appears briefly when the camcorder automatically indexes the tape.
Date and Time Display Set the Time and Date REW (Rewind) DATE/TIME F.FWD (Fast Forward) POWER STOP/EJECT REVIEW DISPLAY RESET DATE TITLER CAMERA /TIME OFF VCR REW PLAY F.FWD STOP/EJECT – TITLE SEL + EDIT – ADV POWER REW – PLAY SEL F.FWD + EJECT STOP/ – ADV EDIT TITLE VCR OFF OWER G KIN SE AC AU TR C/P RE 1. Attach a power supply (battery or adapter/charger) to the camcorder. 2. Press and hold the small button on POWER and place in CAMERA. 3.
Date and Time Display Recording Date and Time (or Date) on Your Tape The time and date (or date only) can be recorded on your tape. Whenever one of the displays appears in the viewfinder, it will be recorded. The camcorder has an auto-date feature that will record the date only for approximately ten seconds when you begin recording.
Tape Counter with Memory Stop The tape counter is automatically displayed in the viewfinder and acts as a handy reference to help you locate tape segments. RESET DISPLAY REW POWER REVIEW DISPLAY RESET DATE TITLER CAMERA /TIME OFF VCR REW PLAY F.FWD STOP/EJECT – TITLE SEL + EDIT – ADV POWER REW – VCR OFF R OWE 28 NG KI SE AC AU TR /P REC REC/ PAUSE F.FWD PLAY SEL TITLE D F.
Tape Counter with Memory Stop Memory Stop The tape counter’s memory stop helps you locate a certain point on the tape. When memory stop is turned on, the tape will stop automatically during fast forward or rewind when the tape counter reaches “0000M”. Using Memory Stop: 1. Press DISPLAY to turn memory stop on. “M” appears after tape counter when memory stop is turned on. 2. Locate the place on the tape you want to return to and press RESET to reset tape counter to “0000M”. 0000M Memory Stop On 3.
Zooming REW – VCR OFF OWER Power Zoom Buttons T = Telephoto W = Wide Angle G KIN SE AC AU TR C/P RE Using Power Zoom Buttons To zoom in or out slowly, press the zoom button lightly. To zoom in or out quickly, press the zoom button firmly. • Press “T” to move the lens in the “telephoto” (close-up) direction. • Press “W” to move the lens in the “wide-angle” direction. The zoom level indicator will appear briefly in the viewfinder. 30 Zoom Level Indicator T W PLAY SEL TITLE D F.
ProEdit Features ProEdit® System • Flying Erase Head • Edit Search • Titler The camcorder incorporates a complete package of advanced editing features to make it easy and fun to edit your home videos like a professional. The major ProEdit® System features are described here and on the following pages. Flying Erase Head A separate erase head is mounted on the spinning headwheel (hence the term “flying”). The flying erase head allows you to make clean edits without “glitches” or “rainbow noise”.
ProEdit Features Titler The camcorder’s built-in titler can store two different titles in memory. Either title can be displayed and recorded at any time. The built-in character register contains over 45 different characters for creating your titles. Each title can contain up to 32 characters on two lines. TITLE SEL – (Also REW) POWER in CAMERA TITLE SEL (Also PLAY ) TITLER TITLE SEL + (Also F.FWD ) REVIEW DISPLAY RESET DATE TITLER CAMERA OFF VCR REW PLAY F.
ProEdit Features To Create a Title 1. Attach a power source to the camcorder, press and hold the small button on POWER while sliding it to CAMERA. POWER indicator will light. 2. Press TITLER to display titler graphics in the viewfinder. A flashing cursor will appear. Note: Press TITLE SEL (select) to select the other title page. Each time you press TITLE SEL, it will switch between the two title pages. 3. Press EDIT–ADV to move the flashing cursor to the place you want to begin your title. 4.
ProEdit Features Recording Titles on a Tape in the Camcorder To record a title on a tape in the camcorder, follow the steps below. 1. Attach a power source to the 4. Press REC/PAUSE to start recording camcorder, slide POWER to the title. CAMERA. 5. After you have recorded the title for 2. Locate the place on the tape where the desired length of time, press you want to record the title. TITLER to remove titler graphics from the viewfinder.
Recording Tips Make a recording of your home and contents to store in a safe place in case of fire or theft. Practice recording under a variety of lighting conditions. This will help you respond quickly whenever you see a scene you want to record. Do not move the camcorder rapidly from side-to-side while recording. A steady, gradual “pan” avoids blurring and “jitter”. Use the viewfinder to make sure the camcorder is level while recording or your scenes will appear “tilted”.
Viewfinder Playback and Playback Features REW (Rewind) POWER Switch in VCR REVIEW DISPLAY RESET DATE TITLER CAMERA /TIME OFF F.FWD (Fast Forward) VCR REW PLAY F.FWD STOP/EJECT – TITLE SEL + EDIT – ADV POWER STOP/EJECT REW – PLAY SEL D F.FW + T /EJEC STOP – ADV EDIT TITLE VCR OFF R OWE TRACKING NG E KI AC US TR C/PA RE Viewfinder Playback 1. Attach a power supply to the camcorder. 2. Press and hold the small button on POWER while sliding it to VCR. 3.
Viewfinder Playback and Playback Features Playback Features Stop-Action Pause Picture Search During playback, you can view one frame of the tape. • Press REC/PAUSE to stop the action. During playback you can visually search the tape at a higher speed in forward or reverse. • Press REC/PAUSE again to return to normal playback. • Press and hold F.FWD to search the tape forward. Caution: Pause is designed for momentary interruptions and should not be used for an extended period of time.
Playback on a TV or VCR with AUDIO and VIDEO IN Jacks To connect your camcorder to a TV monitor (or VCR) with AUDIO IN and VIDEO IN jacks, you will need an optional audio/video cable, such as AH005 shown on page 46. already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV. REW – PLAY SEL F.
Playback on a TV or VCR with AUDIO and VIDEO IN Jacks 1 Attach the white plug on one end of the audio/video cable to the AUDIO IN jack on the TV or VCR. 2 Attach the yellow plug on the same Note: If your TV (or VCR) has stereo left and right AUDIO IN jacks, attach the plug to the one labeled MONO. If one of the jacks is not labeled MONO, you may need a Y-adapter, such as AH25 shown on page 46, to hear both channels.
Playback on a TV Without Audio and Video Inputs To connect your camcorder to a TV without audio and video input jacks. You will need an optional RF output adapter (such as CRF95) and an optional coaxial RF cable (such as AH065G or AH066G) shown on page 46. REW – PLAY SEL F.
Playback on a TV Without Audio and Video Inputs Playback Operation 1. Set the channel selector switch on the RF output adapter to CH3 or CH4. 2. Turn on the TV and tune it to the same channel (3 or 4) you selected with the channel selector switch on the RF output adapter. 3. Press and hold the small button on the camcorder‘s POWER switch while sliding it to VCR. 4. Insert the cassette you want to play back into the camcorder. 5. Press PLAY on the camcorder. Adjust tracking on the camcorder, if necessary.
Attaching the Shoulder Strap The shoulder strap is designed to let you carry the camcorder from your shoulder and — when you are ready to shoot — bring the camcorder to shooting position in one quick movement. Cautions: When carrying the camcorder with the shoulder strap, place the viewfinder in its original position. This helps prevent possible damage to the viewfinder from bumping against your body as you move. Make sure the shoulder strap is firmly attached before using it to carry your camcorder.
Specifications General Power requirement: 9.6VDC Power consumption: 7 watts (normal) Weight: 4.4 lbs.
Optional Accessories We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your camcorder. These pages have a selection of accessories to help make your memorable moments look and sound even better. To order accessories, contact your local dealer. Accessories are available by calling toll-free or by using the order form on page 49. AC028A Soft Camcorder Case This case provides exceptional protection and utility for full size camcorders and most accessories.
Optional Accessories DCC096 DC (Battery) Car Cord This DC car cord enables you to operate your camcorder from your car, truck, or RV by plugging the car cord directly into the vehicle’s cigarette lighter. Caution: Do not use any other car cord with this camcorder. CPS014 AC Adapter/Charger This adapter/charger operates on 100240 volts, 50/60 Hz, so it can be used almost anywhere in the world to power your camcorder and recharge the EP096FS battery supplied with your camcorder.
Optional Accessories AH005 Audio/Video Cable This six foot audio/video dubbing cable is used to connect your camcorder to a VCR or TV monitor to copy tapes. CRF95 RF Output Adapter This adapter is used with coaxial RF cable (AH065G or AH066G) to connect your camcorder to a standard TV (one without audio/video input jacks) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer such as 193983.
Optional Accessories Removing the Lens Hood The lens hood can be removed so you can attach optional accessories, such as wideangle lens, lens extender, or lens filter kit. To remove the lens hood, place your hand flat against the lens hood and turn it counterclockwise. Do not grasp the end of the lens hood. REW – REW – PLAY SEL F.FWD + PLAY SEL F.
Optional Accessories Using an Optional Tripod Mounting the camcorder on a tripod, such as AC031 or AC040, will keep the camcorder steady and produce excellent video results. AC031 Deluxe Tripod REW – VCR OFF OWER PLAY SEL TITLE F.FWD + ECT STOP/EJ – ADV EDIT This tripod’s fluid effect head provides smooth camera pan and tilt. Its quickrelease mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 24" when not in use and weighs only 4-1/4 lbs.
Accessory Order Form Order Form for Camcorder Models CC417 Description Soft Camcorder Case Deluxe Tripod Heavy Duty Tripod Audio/Video Cable Cable Transformer RF Coaxial Cable (6-ft.) RF Coaxial Cable (10-ft.) Y-Adapter Rechargeable Battery Rechargeable Battery AC Adapter/Charger RF Output Adapter Car Cord Video Color Control Center 300-75 Cable Transformer DC Cable Shoulder Strap AC Adapter/Charger (Supplied) Part No.
Accessory Order Form Charge your order on your VISA or MasterCard by filling in below USE YOUR CREDIT CARD ® IMPORTANT: Copy complete account number from your VISA card My card expires: IMPORTANT: Copy complete account number from your MasterCard Copy Number above your name on MasterCard s r r TM My card expires: AUTHORIZED SIGNATURE Prices are subject to change without notice. A complete and correct order will save you days of waiting.
Accessory Order Form To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States and Canada Orders To place your order by phone, have your Visa or MasterCard ready and call the tollfree number listed below between 8AM and 8PM Eastern Standard Time. Use this number only to place an order for accessory items listed on this order form.
Care and Maintenance Keep dust and grit from entering the camcorder’s cassette door. Dust and grit are abrasive and cause excessive wear to both the camcorder’s recording and playback heads and cassettes. Do not use strong or abrasive detergents when cleaning your camcorder. They may damage the camcorder. Before handling your camcorder, make sure your hands and face are free from any chemical products such as suntan lotion, as it may damage the finish.
Care and Maintenance Cleaning the Camcorder . To clean the camcorder’s exterior, remove any power source connected to the camcorder and gently wipe it with a clean soft cloth Caution: Use of strong cleaning products, such as those containing alcohol or benzine, may damage the camcorder. Cleaning the Camcorder’s Lens To clean the camcorder’s lens, blow it with a blower brush, and then gently wipe the lens with cleaning tissue and commercially prepared cleaning solution designed for use on camera lens.
Trouble Checks Troubles sometimes are caused by simple “faults” that you can easily correct without the help of a service technician by first checking a few basic remedies. Before you call or take your camcorder to an Authorized RCA Camcorder Servicenter, look below for the type of trouble you are experiencing. Then perform the simple checks and adjustments listed for that trouble.
Trouble Checks Trouble Checks and Adjustments Camcorder Remains in Play Pause • Press REC/PAUSE to return to normal playback. Poor Picture Quality During Recording • There is insufficient light. Add more light. Viewfinder Displays Are Out of Focus • Try adjusting the eyepiece focus control. Details are on page 22. Poor Auto-Focus Operation • Lens may be smudged and image appears unfocused. • Viewfinder eyepiece focus control may be adjusted incorrectly. Details are on page 22.
Trouble Checks Trouble Checks and Adjustments Date and Time (or Date) were Recorded on the Tape • Date and time (or date) will be recorded on the tape whenever they appear in the viewfinder. Press DATE/TIME to remove them from the viewfinder when recording. Date and Time Appear Incorrect • Make sure the date and time have been set. Details on page 26. • The camcorder’s internal clock battery may need recharging. Details on page 27.
Customer Assistance and Service You can reach Thomson at the following number: 800-283-6503 (Toll free inside U.S.A.) Our toll-free Camcorder number operates from 8 a.m. to 5 p.m., CST Monday – Friday for U.S. customers only Thomson provides a toll-free telephone number to help you with any problems you may encounter with your camcorder. Many can be diagnosed over the phone, and if necessary, a replacement unit can be shipped to you.
Limited Warranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • 90 days for labor charges. • One year for parts. What we will do: During the initial 90 days • Exchange your camcorder with a new or, at our option, a refurbished unit or at your option, repair your camcorder at no cost to you. After the 90 days and within one year • Exchange your camcorder with a new or, at our option, a refurbished unit or at your option, repair your camcorder.
Limited Warranty shipment in case of damage or loss. Include with the shipment: • A copy of your dated bill of sale to verify your unit’s warranty eligibility. • A brief note describing your camcorder problem. • Your name, address and phone number. Return transportation, storage, and handling costs and insurance are your sole responsibility. We accept no liability in case of damage or loss. To receive a replacement unit after we have received your unit: 1.
Index Accessories, Included . . . . . . . . . . . . . .3 Accessories, Optional . . . . . . . . . .44-51 Accessory Lens, Attaching . . . . . . . . .47 Accessory Order Form . . . . . . . . . .49-51 Adapter/Charger, Using . . . . . . . . . .4,10 Adjustments and Checks . . . . . . . .54-56 AE Displays . . . . . . . . . . . . . . . . . .20,24 AI (Artificial Intelligence) . . . . . . . . .19 Assistance . . . . . . . . . . . . . . . . . . . . . .57 Attaching Adapter/Charger . . . . . . .
Index Picture Search . . . . . . . . . . . . . . . .36-37 PLAY Button . . . . . . . . .7,8,31,36,39,41 Playback on a TV With AUDIO/VIDEO IN Jacks . . . . .38-39 Playback on a TV Without Audio/Video Inputs . .40-41 Playback, First . . . . . . . . . . . . . . . . . . . .7 Playback, Viewfinder . . . . . . . . . . . . .36 Plug Adapter, Optional . . . . . . . . . . . .10 POWER (CAMERA/OFF/VCR) Switch . . . .5,7,12,19,26-27,36,39,41 Power Zoom Buttons . . . . . . . . . . . . .30 Powering Your Camcorder . . . . .
Need Assistance? We want to help! U.S. Consumers: Camcorder Exchange Warranty . . . . . .800-283-6503 Customer Service . . . . . . . . . . . . . . . . .800-336-1900 Accessories . . . . . . . . . . . . . . . . . . . . .800-338-0376 Canadian Consumers: English . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0338 French . . . . . . . . . . . . . . . . . . . . . . . . .800-522-0445 If your camcorder needs service, please contact your dealer or the nearest Servicenter from the yellow pages.