nCR camcorder user's guide CC4371
Important Safety Information Be sure to read all the safety information before you begin to use this product. WARNING: To reduce the risk of fire or shock hazard, do not expose or AC adapter/charger to rain or moisture. camcorder This symbol indicates "dangerous [ I voltage" inside the product that presents a risk of electric RISKOF ELECTRICSI-IOCK DO NOT OPEN shock or personal injury. This symbol indicates important accompanying the product. TO REDUCE THE RISK OF ELECTRIC (OR BACK).
Wewant to makesureyou enjoy your newcamcorder.If you haveany questions,call: Camcorder Exchange Warranty ...........800-283-6503 (pages 74-75) Customer Service ................................... 800-336-1900 (page 73) Accessories ............................................. 800-338-0376 (pages 59-62) Safety Information .............................. i First Time Operation • Assistance ....................................... 3 • Unpack the Camcorder and Accessories ............................
Recording • Usethe LCD Monitor or Viewfinder to SeeWhatYou Record.....24-25 • LCD Monitor or Viewfinder Displays............................... 26-27 • DISPLAY Button ........................... 28 Playback • Use the LCD Monitor or Viewfinder • Playback for Playback. 50-51 Features • Tape Positioning ....................... 52 • Visual Searching ....................... 52 28 • Stop-Action Pause .................... 52 • Quick Review Feature ................... 28 • Tracking .............
This section Refer describes to the other the basic sections steps necessary for detailed operation to set up your camcorder and feature to record. options. Assistance - The toll-free numbers are available to help you with any problem you may encounter. Camcorder Exchange Warranty ............... 800-283-6503 lo Customer Service ................................... 800-336-1900 Accessories ............................................. 800-338-0376 Unpack the camcorder and accessories.
2. Attach the adapter/charger. To AC 120V, 50/60 Hz Ad._ Charger DC IN 9.6V Jack Since the battery must be charged before it can be used the first time, attach the adapter/charger to the camcorder. 1. Attach one end of the adapter/ charger's DC cable to the DC 2. Attach the other end of the cable to the DC IN 9.6V jack on the camcorder. 3. Plug the adapter/charger's into an operating outlet. plug 4. Details are on page 14. OUTPUT jack on the side of the adapter/charger. 3.
4. Insert a tape. SafetyTab STOP/EJECT Button Tape Windows Cassette Cassette Door Press Here to Close 1. Press STOP/EJECT to open the cassette compartment. 2. Insert the cassette with the safety tab facing up and the tape windows facing out. 5. 3. Press the cassette down gently until it locks into place, and close the cassette compartment door. 4. Details are on page 21. Turn on the camcorder. Switch Note: If you want the date and time displayed on your recordings, you must set it.
Electronic Viewfinder (Grasp here to move. Eyel " Eyepiece Control Focus OPEN Button Shoulder Extension Pad Bright Control LCD Monitor 6. Use the LCD monitor or viewfinder to see what you are recording. You can watch what you're recording on the LCD monitor or in the black-and-white viewfinder. When you open the LCD monitor more than 45 °, the viewfinder automatically turns off. When you close the LCD monitor, the viewfinder automatically turns on.
RECIPA USE Button LIGHT AUTO/OFF/ ON Switch . Set the LIGHT A UTO/OFF/ ON switch to A UTO. • The color enhancement light helps you create brighter and sharper images. • Set the LIGHTAUTO/OFF/ON switch to AUTO if you want the color enhancement light to turn on automatically when you aim the camcorder at a dark object and turn off when you aim it at a bright object. • Details are on pages 12-13. . Start and stop recording. • Press and release the REC/PAUSE button to start recording.
CAMERA/ OFF/VCR REW/ REVIEW Button PLAY Button REC/PA USE 9. Play back what you have recorded. 1. Press the REC/PAUSE button to pause recording. switch while you slide it to VCR. 3. Press REW/REVIEW to rewind the tape. 4. Press PLAY to play back the tape. 5. Press STOP/EJECT when you are finished playing back the tape. on LCD monitor viewfinder playback pages 50-51. 8 switch to OFF to turn off the camcorder. 11. Close the LCD monitor 2.
12. Review camcorder's DISPLAY operating AV DUB Button Button RESET controls• REW (Rewind)/REVIEW Also - Button) Button Button PLAY Button DATE/TIME TITLER Button F.FWD (Fast Forward) Button (Also + Button) Button STOP/EJECT Button (Also EDIT-ADV Button) CAMERA/ OFF/VCR Switch I. Light Microphone Lens Lens Hood Reset Switch (See Trouble Checks for details.
. Review camcorder's operating controls. (continued) Built-In Speaker LCD Monitor OPEN Button Attach Rechargeable Battery Here Bright Volume Control Attach Adapter/ Charger's DC Cord Here INST. (Instant) ZOOM Button FADE Button DIGITAL EFFECTS Button Viewfinder STEADY Button PIX Shoulder Extension Pad LIGHT AUTO/ OFF/ON Switch Eyepiece Control Focus Shoulder Strap Attachment Ring BRIGHT and FOCUS Controls (See Trouble Checks for details.
Attaching the Shoulder Strap The camcorder's shoulder strap is designed to let you carry the camcorder from your shoulder and - when you are ready to shoot - bring the camcorder to shooting position in one quick movement. To Attach the Shoulder 1. Unfasten Strap one end of the shoulder strap from the buckle. Make sure you leave the buckle on the strap. 3. Thread the end of the strap back through the buckle making sure it is threaded over the outer strap. Make sure the strap is not twisted.
Built-In Color Enhancement Light The built-in color enhancement light automatically adds light when needed. To operate the video light, press and hold the small button on the CAMERA/OFF/VCR switch while you set it to CAMERA. CAMERA/OFF/VCR Switch Video Light LIGHT A UTO/OFF/ON To Use the Light Set the LIGHTAUTO/OFF/ON • switch. To turn the light on, set the switch to ON. If you want the light to come on automatically when the camcorder senses there is insufficient light, set the switch to AUTO.
Replace Light Bulb ht Cover Light Case Reflection Plate To Remove and Replace the Light Bulb: 1. Press and hold the lower hook of the light cover while removing cover from the light case. the light 2. Replace the light bulb. Note: See the installation instructions packed with the replacement bulb for detailed instructions. Lower Hook 3. To replace the light cover, pass the bulb through the hole of the reflection plate and attach the lower hook to the light case on the camcorder. 4.
Use the Adapter/Charger to Power Your Camcorder The adapter/charger attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 120 volts, 50/60 Hz, and can be used to power the camcorder or recharge the battery. -| on a power souree6ther!ith_ power converters. CPS014, They To AC 120V, 50/60 Hz DC IN 9.6V Jack POWER Indicator Adapter/ Charger DC Cable Attach Adapter/Charger 1.
Use the Battery to Power Your Camcorder Charge the Battery The battery must be charged before it can be used the first time. Initial charging takes approximately two hours. The camcorder's operating time depends on how often you turn the power on and off and how much you use the monitor, zoom, and pause. To conserve battery power, turn the camcorder off during recording breaks. To AC 120V, 50/60 Hz Rechargeable (Hold battery slide down.) Battery flush and Align Arrows .
Use the Battery to Power Your Camcorder (continued) CAMERA/ OFF/VCR Switch \ BATTERY EJECT Button Rechargeable Battery Hold Battery Flush and Slide Down Attach the Charged If the DC cable camcorder, Battery is attached remove 3. Press and hold the small button on the to the it before CAMERA/OFF/VCR set it to CAMERA. attaching the battery. 1. Align the reference battery to the arrow the camcorder. arrow on the on the back Remove of 1.
Use the Battery to Power Your Camcorder Battery Level (continued) Indicator The battery level indicator appears in the viewfinder you the amount of power in the rechargeable or LCD monitor battery. Battery Level Indicator Display Viewfinder or LCD Monitor Note: If you can't see the battery level display, press DISPLAY. • When _ appears, the battery is fully charged. • As the power is used _ I1 appear.
Use the Battery to Power Your Camcorder Battery (continued) Care • Your battery will provide better service and longer performance if you charge if before and after use, and store it at nor- (35°C). You might damage the battery if you use it at temperatures above 122°F (50°(2). Operation time decreases at extremely low temperatures. mal room temperature. • The battery should be charged at a temperature of 32°F-95°F (0°C-35°C) to prevent damage.
Use the RCA Optional Car Cord Adapter The optional DCC096 car cord shown on page 59 allows you to power your camcorder from the cigarette lighter socket of a car, truck, or RV. It converts 12-volts to a 9.6-volt output. Note: Consult the installation and operating instructions enclosed with the DCC096 for complete operating instructions. Use the DCC096 Car Cord Adapter _:_!_:_i::_: __::_!:!!_::'_:_:':_':_ ,.,//Lighter _r Socket / Cigarette DC IN 9.6V Jack 1.
Make sureyou selectgood quality tapesfor your camcorder.Useof poorquality tapes or tapesthathavebeendamagedor mishandledcancontaminatethe videoheads, resultingin a snowypictureor nopictureatall duringplayback. Becausethereis no controlover the typeof tapepurchasedor rentedby consumers,headcleaning is not coveredunder warranty. It is considerednormalmaintenance. If a snowypictureor no-pictureconditionpersists,considerthe useof a dry chemical nonabrasivehead-cleaningtape.
Insert and Remove Cassettes STOP/ EJECT Button ' Tab Windows Press here to close. ° 2. Attach a power source to the camcorder. Press the STOP/EJECT facing up and tape windows facing out. Gently push the cassette down until it locks into place. button. The cassette holder opens automatically, . Gently close the cassette holder with your hand. 3.
Set the Time and Date You must set the correct date and time before it can be displayed and recorded tapes. The built-in clock cell must be charged as described on the next page. CAMERA/ OFF/VCR DATE/TIME REW/ REVIEW on your F.FWD Button STOP/EJECT Button Button _ oo8o ° . Button .. 0 Attach a power supply to the camcorder. 4. Repeatedly press the F.FWD or REW/ REVIEW until the correct month appears. Press and hold the button to advance the digits faster.
Record the Time and Date, AUTO Date, Auto TITLE, or Date The time and date, AUTO date, auto TITLE, date only, or no date can be recorded your tape. Whenever one of these displays appear, it will be recorded. on To Select the Display to Record l° Repeatedly press DATE/TIME to select the display you want to record. • Date and Time Display: The date and time will be displayed and recorded.
Use the LCD Monitor or Viewfinder to See What You Record You can watch what you are recording on the LCD monitor or in the viewfinder. When the LCD monitor is open more than approximately 45 °, the viewfinder automatically turns off. Close the LCD monitor and the viewfinder automatically turns on. Use the LCD Monitor OPEN Button Bright Control Monitor can open up to 90 °. Open monitor 90 ° before you rotate it. 1. Press the OPEN button and open the LCD monitor. Make sure the monitor is open 90°.
Use the Viewfinder The camcorder's viewfinder is a miniature monitor that displays the picture seen by the camcorder when recording. When the LCD monitor is open more than 45 -°,the viewfinder automatically turns off. Viewfinder Eyepiece Adjust Viewfinder for Convenient Viewing __ For convenient viewing, rotate the viewfinder horizontally, camcorder, and adjust the eyepiece.
LCD Monitor or Viewfinder Displays AE:60 O000M F_--ql m ZM:2 I.ZOOM INDEX NO TAPE T W A/V DUB REC AE:60 (Auto Exposure) 10:30AM 11/18/1998 Shutter Speed • Press the DISPLAY button to display the shutter speed selected by the camcorder. Select MIRROR to record a symmetric image on the left and right. • Select MOSAIC Battery Level Indicator Digital Effects (ZM:2) Press the indicator selected. button to • 26 image.
INDEX Indicator Press the DISPLAY button to display this indicator when the camcorder is placing an index mark on the tape. Details are on page 30. • NO TAPE flashes when you try to record with no cassette inserted. • TAPE END flashes when there is approximately five minutes of recording time left on the tape. • TAPE END briefly appears when you reach the end of the cassette when Status Displays The following displays appear to tell you the status of the camcorder. • The A.
DISPLAY Button REW/REVIEW Button Micro VCR Switch Zoom Buttons (T and W) Button DISPLAY Button Quick Review Feature The DISPLAY button lets you remove the battery level, steady pix, tape speed, tape counter with memory stop, remaining tape display, index, fade, zoom and digital effects indicators from the viewfinder or LCD monitor. Press DISPLAY indicators. to remove the Press DISPLAY indicators. • again to display the Microphone The microphone picks up the sound during a recording.
Auto Focus Steady Pix TM Feature The camcorder focuses on the subject in the center of the LCD monitor or The steady pix feature corrects slight shaking of images during some recording modes. viewfinder. Auto focus operates on the telephoto (T) side from approximately 2-1/2 feet to infinity. It operates on the wide-angle (W) side from 3/8 inch from the lens surface (macro-focus) to infinity.
ii Tape-Remaining Display The tape-remaining display shows the approximate amount of tape remaining recording or playback. Electronic for Indexing Each time you begin recording (after the camcorder has been turned off for at least four hours), the camcorder automatically records an index mark at the beginning of the new recording.
i__ Zooming Press one of the zoom buttons to zoom in and out for close ups or wide-angle Instant zooming immediately magnifies the picture 1.5 times. shots. Zoom Buttons (T and W) Button Use the Zoom Buttons (T and W) 1. To zoom in or out from wide angle to 32 times, press zoom button T or W. • To move the lens in the telephoto (close-up) direction, press T. • To move the lens in the wide angle direction, press W.
Digital Effects The camcorder has a digital processor that allows you to record using five special digital effects: 16X9, a negative image, 130 times digital zoom, a symmetric mirror image, or a mosaic image. Each effect is described in detail on the next pages. To Select a Digital Effect ° Make sure the displays appear in the viewfinder or on the LCD monitor. If they do not, press the DISPLAY button. . Repeatedly press the DIGITAL EFFECTS button.
Digital Effects (continued) 16X9 Mode The camcorder has a wide recording mode that lets you make recordings compatible with the 16X9 format. When 16X9 is activated, the camcorder records black bars at the top and bottom of the picture to produce the wide-screen as "letterbox" recording. effect. This is also known New 16x9 TV Screen Standard Shape TV Screen To Record in the 16X9 Mode I. Place the camcorder in record pause. Make sure the displays appear in the viewfinder or on the LCD monitor.
Digital Effects (continued) Negative Mode The camcorder has a negative mode that lets you turn the image negative. ° Place the camcorder in record-pause. Make sure the displays appears in the viewfinder or on the LCD monitor. If . 4. they do not, press DISPLAY. . Repeatedly press DIGITAL until NEGPOS appears. EFFECTS Press REC/PA USE to start recording. To turn off negative recording, press REC/PAUSE to pause recording, and repeatedly press DIGITAL EFFECTS until no digital effects display appears.
Digital Effects Mirror Mode (continued) The camcorder has a mirror mode that lets you display a symmetric image on the left and right, obtained by placing a mirror at the center of the screen. 1. Place the camcorder in record-pause. Make sure the displays appear in the viewfinder or on the LCD monitor. If they do not, press DISPLAY. 2. Repeatedly press DIGITAL EFFECTS until MIRROR appears. . Press REC/PA USE to start recording. 4.
Fade In and Out of Scenes You can add a professional touch to your recordings when you fade in and out of scenes. Both the picture and sound gradually appear or disappear. The speed of the fade is controlled by the camcorder. FADE Button To Select a Type of Fade You can select white fade, black wipe fade, zoom fade, or black-and-white fade. . . Press REC/PAUSE to pause recording. Make sure the displays appear in the viewfinder or on the LCD monitor.
k Fade ... In and Out of Scenes ..... (continued) Fade In 1. Press REC/PAUSE recording. Fade Out to pause 2. Repeatedly press FADE to select the fade you want to use. 3. Note: The last fade used appears the first time you press FADE. Press REC/PAUSE to start 1. During recording, repeatedly FADE to select a fade. press Note: The last fade used appears the first time you press FADE. 2. Press REC/PAUSE to stop recording. The picture and sound gradually disappear. recording.
Tape Counter The tape counter acts as a handy reference to help you locate tape segments. The memory-stop feature helps locate a certain point on the tape. When the tape counter appears, the tape stops automatically during rewind or fast forward when the tape counter reaches O000M. DISPLAY Button RESET Button Use the Memory-Stop CAMERA/ OFF/VCR Switch REW/ REVIEW F.FWD Button STOP/EJECT Button o Butto_ Feature 1. Press REC/PAUSE to pause recording.
Editing Features The camcorder incorporates a complete package of advanced editing features to make it easy and fun to edit your home videos like a professional. The major features are described on the following pages. • Flying Erase Head • A/V (Audio and Video) Dub • Camera Edit • Titler • Audio Dub CAMERA/OFF/ VCR Switch oooo Camera F.FWD Button 0 Edit Feature Flying Erase Head The camera edit feature allows you to position the tape when the camcorder is in record-pause.
Editing Features Audio (continued) Dub The audio dub feature lets you record new audio (sound) on a previously recorded tape without erasing the original video (picture). The previous audio is erased and replaced with the new audio. The audio dub feature increases your editing flexibility. segments first, then add narration or music. You can assemble video You can add new audio by: Speaking into the camcorder's built-in microphone. Connecting an external sound system to the white AUDIO jack.
Editing Features (continued) Audio Dub (continued) AV DUB Button I--AUDIO--.I IN OUT ,e White Audio Plug o/" ", s* 'White Jack Back of Mono VCR or Tape Deck ""4_q_ Audio/Video Cable __m__mVH83) Yellow Video Plug (No connection) "--__o White .
... Editing Features Audio and Video (continued) Dub The audio and video dub feature lets you record new audio (sound) and video (picture) on a previously recorded tape. The source for audio and video dub is: • The camcorder's built-in microphone and camera. • An external sound and video system connected to the white AUDIO and yellow VIDEO jacks on the side of the camcorder. Connect the camcorder the audio/video source as shown on the next page. to To Audio and Video Dub 1.
Editing Features (continued) A V DUB Audio and Video Dubbing Button Switch Yellow ,,tt Jack ,, t "_ VIDEO OUT Back or VCR or TV Monitor t • 'I White Audio Plug AUDIO OUT ; u Audio/Video.Cable Yellow Video Plug Yellow Video Plu_ _ "_a_o" White Jack / t a t J v p t ,, • t' , , White Audio Plug V r-t@ AUDIO OUT yellow VideoPlug f " ff " "_l_ _ l A _/ _ White .# Aodio White Aud,o Pl"g LR@ " "__such Y-Adapter " " as AH25)/ " ._Audio/Video Cable @.
Editing Features (continued) Titler . The camcorder's be displayed built-in titler can store a title in memory. and recorded The created at any time. The built-in character register contains more than 45 different title can contain up to 32 characters on two lines. - Button (Also REW/REVIEW 44 Your Button) Button) EDIT-ADV Button (Also STOP/ EJECT Button) Button _!_ characters. + Button (Also F.
Editing Features (continued) Titler (continued) To Create a Title 1. Attach a power source to the camcorder. Press and hold the small button on the CAMERA/OFF/VCR switch while you slide it to CAMERA. 2. Press TITLER to display the titler graphics in the viewfinder or on the LCD monitor. A flashing cursor appears. 3. Press EDIT-ADV to move the flashing cursor to the place where you want to begin your title. 4. o below for the characters 5.
Editing Features (continued) Titler (continued) - Record a Title on a Tape in the Camcorder 1. Attach a power source to the camcorder. Press and hold the small 2. button on the CAMERA/OFF/VCR switch while Locate the place you want to record where the title. you have the desired Remember: To eliminate the pauses of blank tape, use the audio and video dub feature to add Note: TITLER to display graphics in the viewfinder LCD monitor.
Recording Tips Try to make sure indoor scenes are well-lit. This improves picture quality and color reproduction. Do not move the camcorder rapidly from side-to-side while recording. A steady, gradual "pan" avoids blurring and "jitter." Use the viewfinder or LCD monitor to make sure the camcorder is level while recording so that your scenes won't appear "tilted." Do not bump or tap the camcorder's microphone while recording so that your scenes won't appear tilted.
Record from a VCR or TV Monitor To record on a tape in your camcorder from a VCR or TV monitor with audio and video output jacks, you need an optional audio/video cable, such as VH83 shown on page 61. Detailed instructions are on the next page. A V OUTIIN Switch Yellow Jack ',_ It ,,st ; It AUDIO OUT VIDEO OUT Back of VCR or TV Monitor White Audio Plug ...... _. i _, ' I:." ./ ,,. Audio/Video .... • Cable Yellow Video Plu n (such asVHS3) I ' ' ' _' s White -OR- t AodioPlug .
Record from a VCR or TV Monitor (continued) Installation 1. Attach the white plug on one end of the optional audio/video cable to the AUDIO OUT jack on the VCR (or TV monitor). Note: You need an optional audio/video cable, such as VH83, shown on page 61. If the audio source has separate left and right outputs, attach the audio plug to the one labeled MONO. If one is not labeled MONO, you may need a Y-adapter, as shown on page 61 to record audio from both the right and left channels.
Use the LCD Monitor or Viewfinder for Playback You can watch tapes in color using the LCD monitor or black-and-white using the viewfinder. When the LCD monitor is open more than 45 -°,the viewfinder automatically turns off. Close the LCD monitor, the viewfinder automatically turns on. Rotate the monitor completely around and place it against the camcorder for convenient playback. During playback, you can hear the sound from the tapes on the built-in speaker when you use the LCD monitor.
Use the LCD Monitor or Viewfinder To Play Back 1. for Playback a Tape • To adjust the speaker volume, turn the volume control. Attach a power supply. Note: The monitor may become warm when left open for an extended period of time. This is normal. Attach the adapter/charger, charged battery, or optional car cord. 2. Insert a tape. Use the Viewfinder • Press STOP/EJECT to open the cassette compartment.
Playback Features CAMERA/ OFF/VCR Switch REW / REVIEW Button F.FWD Button STOP/ EJECT Button O 0000 REC/ PA USE Button Tape Positioning Stop-Action Press the small button on the CAMERA/ • During playback, press REC/PAUSE to "stop the action" and view one frame of the tape. OFF/VCR VCR. switch while you set it to • Press and quickly release REW/ REVIEW or FFWD to rewind or fastforward the tape. • Press STOP/EJECT the tape. to stop Visual Searching During playback, press and hold F.
Playback Features (continued) TRACKING Buttons (Also W and T) Tracking During playback, streaks might appear in the playback picture. Press either TRACKING button (W or T) to move the streaks up or down and out of the picture. During stop-action playback, pressing one tracking button might reduce picture "jitter" (picture bouncing up and down). Some "jitter" is normal. Remove its preset the tape to reset the tracking to center. Note: The tracking buttons only affect tape playback.
Playback on TV (or VCR) with Audio/Video Input Jacks To connect your camcorder to a TV monitor (or VCR) with audio/video in jacks, you need an optional audio/video cable such as VH83 shown on page 61. If your TV is already connected to a VCR, attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV. A V OUTIIN Switch White Audio AU ,O " ..... _"_ Yellow VIDEO Jack Plug / _q_.. VIDEO Audio/Video Cable :_ ,' " J _ " ,' : ," ' Yellow . : o. ! Video Plug _.
Playback Operation and How to Copy Tapes on the VCR 1. A. Camcorder connected directly to TV: Turn on the TV and tune it to 3. Press PLAY. • During playback, use the playback features on pages 52-53. the video input channel. B. Camcorder connected to VCR that • Turn the volume control on the is already connected to TV: Turn on VCR and place it in the "line" or "camera mode". (If your VCR does not have a "line" or "camera mode", consult the VCR owner's manual.
Playback on TV Without Audio/Video Inputs To connect your camcorder to a TV without audio/video inputs, you need an optional CRF95 RF output adapter and an optional coaxial RF cable, such as VH82 or VH90 - shown on page 61. If your TV has AUDIO and VIDEO IN jacks (or is connected to a VCR), refer to pages 54-55. Antenna . I f', OR OR ",, A V OUT/IN , Antenna Switch \\ \ Optional 300/75 ohm \ Transformer Back of TV \ \ \ I "_'K OR Channel \\ ",, Selector \ \ \ IN FROM Optional
Playback Operation 1. Set the CH3/CH4 switch on the RF output adapter to channel CH3 or CH4. 2. Turn on the TV, and tune it to the same channel you selected with the RF output adapter's CH3/CH4 switch. 3. Press and hold the small button on the CAMERA/OFF/VCR set it to VCR. switch while you 1. Turn on the TV and tune it to channel 3 or 4. Turn the TV's volume down to prevent a high-pitched caused by feedback. 2.
Write down your camcorder'sserial numberandkeepit separatefrom the camcorderwhentraveling. If your camcorderis lost or stolen,you will be ableto identify it. Useextracarewhen you useyour camcorderor accessories at a beachor pool. Spray,sand,anddust shouldbe avoided. If your lenshasbeenexposed to the elements,cleanit only with properlenscleaning supplies. 58 Makesureyou haveanyadaptersthat you might needbeforetakingyour camcorderto othercountries. Consult your dealerfor advice.
We invite you to take a look at somegreatideasfor sparkingcreativity andaddingto the fun of using your VHS camcorder.The following pageshavea selectionof accessoriesto help makeyour memorablemomentslook andsoundevenbetter. Theseaccessoriesaredesignedto makethe processof recordingandwatchingyour videosmoreenjoyable. To order accessories,contact your local Dealer. If a dealeris not nearby,all accessoriesareavailablethroughtoll-free orderingor by using the orderform on page 63.
EP096FSand EP096FL Rechargeable Batteries These rechargeable lead-acid batteries are designed specifically for long life. The EP096FS is a l-hour battery. The EP096FL -powers your camcorder twice as long as the EP096FS (depending on how much you turn the camcorder on and off and use zoom and pause). Both can be recharged with the AC adapter/ charger that came with your camcorder.
CRF95 RF Output Adapter VH54 Cable Transformer This 75-to-300 ohm transformer is used to connect a standard 75-ohm antenna cable This RF output adapter is used with a coaxial RF cable, such as VH82 or VH90, to connect your camcorder to a standard TV (one without audio/video inputs) for playback.. If your antenna cable is the flat twin-lead type attached by two screws, you need a 300-to-75 ohm transformer.
Remove the Lens Hood Remove the lens hood so you can attach optional accessories, wide-angle lens, lens extenders, or lens filter kits. such as Attach an Accessory Lens 1. Attach the lens cap over the lens hood. 3. Turn the accessory lens clockwise into the camcorder's lens. Make sure the lens is tightened firmly, but do not over tighten. J . To remove the lens cap and hood, turn them counterclockwise with the palm of your hand.
Order Form for Camcorder Model CC4371 Description Part No. Price Deluxe Tripod AC093 $ 59.95 AC202 $ 49.95 AH25 $ CPS014 $219.95 RF Output Adapter CRF95 $ 69.95 Car Cord Adapter DCC096 $ 49.95 Rechargeable Battery (Extended) EP096FL $ 79.95 Rechargeable Battery (Standard) EP096FS $ 69.95 75-300 Cable Transformer VH54 $ 2.95 Coaxial RF-Cable VH82 $ 6.95 Audio/Video VH83 $ 5.95 VH90 $ 7.95 Built-in Light 221111 $ 12.95 Shoulder 241305 $ 12.95 241044 $169.
Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE YOUR IMPORTANT: I III CREDIT CARD Copy complete account number from your VISA card II---l-Tql-l-Y-11--7-1--q Expirationdate:[-"r'-][--_ IMPORTANT: Copy complete account number from your MasterCard l-_-T-ql I I I II I I I II I I I I Copy Number above your name on MasterCard IMPORTANT: _ Expiration date: I IIIII Copy complete account number from your Discover Card I I I I II I I I II--FFNI Expiration date: I
To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States and Canada Orders To place your order by phone, have your Visa, MasterCard, or Discover card ready and call the toll-free number listed below between 8AM and 10PM (EST) Monday through Friday or between 9AM and 5PM (EST) Saturday. Use this number only to place an order for accessory this order form.
If you're having trouble with your camcorder, you probably can correct the problem yourself. Before you take your camcorder to an Authorized RCA Camcorder Service Center or call a service person, use the chart below. Find the problem and try the adjustment(s) that is listed to the right. If service should be necessary, to get service. No power • read your warranty to find out what is covered and how Set the CAMERA/OFF/VCR switch to CAMERA VCR to turn on the camcorder.
._.!':.' : ::_iiii[_ecksan_:_stmen_i : 'rouble::_: ii % ii ::_%iiiiiii ! iiiii iii iiiiiiiiiii ! iii i i i iii : :ii! ::ii'_::::il iiiii iiii:i iii i iiiiiiiiiii!i i iiiii!!iii ii ! iiiiiiiii iiiiii i!i i iiiiiiiiiii iiii!iii i i i ii Sound is too low or distorted • Subject was too far from camcorder. Tape stops during rewind or fast forward • Whenever the tape counter appears, the camcorder will stop rewinding (or fast forwarding) when counter reads O000M. Press REW/REVIEW or F.
Date and/or time or title were recorded • on tape Displays are recorded on tape whenever they appear in the viewfinder or on the LCD monitor. Remove them from the viewfinder or LCD monitor when recording. • • See pages 22-23. When (S) DATE or TITLE is selected, the display is automatically recorded when you begin recording or change the cassette. See pages 22-23. Title is recorded whenever it appears in the viewfinder or LCD Monitor.
No or low sound Adjust the volume control on the side of the monitor. To hear sound during camcorder playback, use the monitor. There is no sound during viewfinder playback. during monitor playback Black bars on top and bottom of • 16X9 feature selected. See page 33. picture. Bright, crystalshaped slgots appear in viewfinder or on LCD monitor • Colored bright spots appear on LCD monitor Back of LCD monitor is hot Sunlight is directly entering the lens.
Clean the Camcorder To clean the camcorder's exterior, remove any power source connected to the camcorder and gently wipe it with a clean soft cloth. Clean the Camcorder's To clean the camcorder's Lens •e :: __::_::__'_'__ lens, blow it with a blower brush, and then gently wipe the lens with cleaning tissue and commercially prepared cleaning solution designed use on camera lens. Improper cleaning might scratch the lens. Caution! for Do nol [6ueh the i_:.
Proper Care and Storage Keep dust and grit from entering the camcorder's cassette door. Dust and The camcorder grit are abrasive subject the camcorder shaking, or dropping. wear and cause excessive to both the camcorder's recording/playback cassettes. heads and handling sure your hands any chemical lotion, your as it might camcorder, and face products • the finish. parts inside. Avoid operating your camcorder immediately after moving it from a cold location to a warm location.
LCD Monitor General Power requirement: 3" diagonally measured LCD/TFT active matrix system 9.6VDC Power consumption: LCD monitor on: 9 watts Viewfinder on: 7.5 watts Weight: Camera Scanning: 4.7 lbs. (2.15kg) frames 1/4" CCD Imager 16:1 (4-64 mm) power zoom lens Diameter: 46 mm Tripod Video Recorder Section Format: VHS Mount One 1/4" x 10 threaded hole system: Two video record/playback One flying erase head heads AC Adapter/Charger Power requirement: 50/60 Hz.
Thomson YoucanreachThomson atthe followingnumber: may encounter arranged. number Please have your camcorder If we are unable unit to you. for repair or exchange over Always consult Thomson the phone, we will gladly service your unit or Authorization exchange it for a new or, at our option, refurbished camcorder. Refer to the limited anything! warranty representative specific ready we will quote the cost of a repair or to Thomson to resolve your problem model/ when you call.
What your warranty • covers: Any defect in materials 2. or workmanship. . For how long after your purchase: • 90 days for labor charges. The exchange arrival. 4. What we will do: P_QmU I. After the 90 days and within one year Exchange your camcorder with a new or refurbished unit, or repair your camcorder. The option will be ours. Parts will be provided at no charge, but you will be responsible for the cost of labor required for the repair. 1.
• Evidence of purchase date, such as a bill of sale, to verify your unit's warranty eligibility. • A brief note describing camcorder's problem. • Your name, address • Take your unit to the Authorized RCA Camcorder Service Center of your choice. • your and phone number. Make sure you insure your shipment case of damage or loss. 3. Include with the shipment: • Evidence of purchase date, such as a bill of sale, to verify your unit's warranty eligibility. • A brief note describing problem.
C + and - buttons 9, 44 16X9 feature 33 16X9 indicator 26, 33 Cable TV installer Camcorder A note 57 cleaning 70 turn on 5 A.
D 26, 36 Fast-forwarding indicator 22, 27 recording 23 setting 22 DATE/TIME button 9, 22, 23, 27, 46 DCcable 3, 14, 15, 16, 19 DCIN9.6Vjack 10, 14, 19 Design specifications 72 Digital effects 32 DIGITAL EFFECTS button 10, 215, 32, 33, 34, 35, 36 Digital effects indicators 26, 32 Digital zooming 34 DISPLAY button 9, 17, 26_27, 28, 30_ 31, 32, 33, 34, 35, 38, 55 Displays in LCD monitor 26 Displays in viewfinder H Handstrap 4, 10 Head cleaning 20 I I.
Informationtouser72 Insertandremovecassettes 21 INST.
STEADY PIX button 10, 26, 29 Steady pix feature 29 R Steady pix indicator STOP button 8, 38 REC indicator 7, 27 REC/PAUSE button 7, 10, 33, 34, 35, 37, 40, 42, 46, 49, 52, 55, 57 Record-pause Recording 16X9 33 letterbox indicator 26 Stop-action pause 52 STOP/EJECT button 5, 9, 17, 21, 22, 38, 40, 42, 44, 50, 51, 52, 55, 57 7 T 33 Recording 48 from VCR Recording speed (or TV) on camcorder Table of contents Tape 20 inserting 5 Tape copying 55 on camcorder 48, 49 Recording tips 47 Registration
Tripod optional 60 using 60 Trouble checks 66 U Unpack camcorder and accessories 3 V VIDEO at_d AUDIO jacks Videocassettes 20 Viewfinder 9, 40, 42, 54, 56 6, 10, 24, 25 adjust for viewing 25 displays 26 eyepiece focus control 25 playback 50, 51 using to record 24 Visual searching 52 Volume control 10, 50, 51 W Warnings Warnings, i tape 27 Z ZM:2 indicator 26, 34 Zoom buttons 10, 31 ZOOM indicator 26, 27, 31 Zoom level indicator Zooming digital 8O 31 34 27, 31
f_ THOMSON CONSUMER ELECTRONICS 10330 N Meridian Indianapolis, IN ©1998 Thomson Consumer Trademark(s) ® Registered Marca(s) Registrada(s) Printed in Japan TO(_OM QR19421 15331640 Street 46290 Electronics, Inc.
