camcorder user's guide CC434/CC439
Important Safety Information Be sure to read all the safety information before you begin to use this product. 1 i product WARNING: To reduce or AC adapter/charger the risk or of moisture. fire or shock hazard, to rain This symbol indicates inside the product RISK OFE_d3TFUCSHOCK DO NOT OPEN "dangerous that presents electric shock or personal RISQUE I_ CHOC EI.EC1TgOgE NE PAS OUVRIR do not expose This symbol indicates instructions accompanying w)ltage" a risk of injury.
We want to make sure you enjoy your new camcorder. questions, If you have any call: Customer Service ..................................... Accessories ......................................... Safety Information ................................ i Product Registration ............................. i 800-336-11900 (Page 71) 800-338-0376 Powering the Camcorder • Using the Adapter/Charger • Using the Rechargeable • Charging Contents .............................................
Recording • Quick Features Review .................................... • Tape Positioning • Microphone ............................... Intelligence) 19 ................ Focus ...................................... • Electronic Indexing 19 20 ........................... 21 • Time Remaining Display .................. 21 • Viewfinder ................................... 22-23 • Displays in Viewfinder ................ • Playback Playback ........................ .
This section describes only the basic steps necessary to set up your camcorder record. Refer to the other sections for detailed operation and feature options. to Assistance The toll-free numbers are available to help you with any problem you may encounter. Customer Service ................ Accessories .................... 800-336-1900 800-338-0376 1. Unpack the camcorder and accessories. • Save the box and packing materials in case you ever need to store or ship your camcorder.
Adapter/Charger DC OUTPUT Jack Adapter/Charger's DC Cable 2. Attach the adapter/charger. Since the battery must be charged before it can be used the first time, attach the adapter/charger camcorder. • Attach one end of the adapter/charger's DC OUTPUT 4 to the DC cable to the jack on the DC IN 9.6V Jack on Back of Camcorder adapter/charger. • Attach the other end of the cable to the DC IN 9.6V jack on the camcorder. • Plug the adapter/charger's an operating • Details outlet. are ol7 page 10.
CAMERA/OFF/VCR Switch Handstrap Lens Cap 3. Remove the lens cap and attach it to the handstrap. 4. Turn on the camcorder. The position of the CAMERA/OFF/VCR camcorder whether • Press and hold the small button CAMERA/O FF/VCR on while sliding it in CAMERA. The electronic viewfinder will come on. switch tells the you want to record (CAMERA), play back tapes (VCR), or turn off the power (OFF).
Safety Tab Tape Window REC (Record) /PAUSE Button Lens Cap on Handstrap Cassette Door Press Here to Close 5. Insert a cassette. • Press STOP/EJECT to open the cassette compartment. • Insert the cassette with the safety tab facing up and the tape windows facing out. • Press the cassette down gently until it locks into place, and close the cassette compartment door. • Details are on page 1Z 6. Position viewfinder and adjust eyepiece focus control. • Grasp the viewfinder and rotate it horizontally.
CAMERA/OFF/VCR Switch STOP/EJECT PLAY )/ REVIEW REC (Record /PAUSE Eyepiece "" Electronic Viewfinder (Grasp Here to Move) o Start and stop recording. Start and stop recording and releasing REC/PAUSE. by pressing REC appears in the viewfinder. You do not have to hold the button to record. Notes: If you do not record within five minutes, the camcorder will automatically shut off to prevent excessive tape wear. Press REC/PA USE to turn on the camcorder.
::' :.... n,, First-Time ,Jr, eration 9. Review the camcorder's operating controls. A V DUB Button REW (Rewind/Review) Button Also Title Select - Button DISPLA Y Button RESET Button PIA Y Button DA TE/TIME Button F.
:_- 9. Review the camcorder's operating . :_ :_:_ :_: : : %: i : + controls. Shoulder Strap Attachment Ring BATTERY EJECT Lever REC (Recordt /PA USE Button 0 Hand Strap with Lens Cap Holder DC IN 9.6V .
:.:. :_:: ::::.::.::_::_: ::ii_:_._:::;.:::i;_-:#;;:::? :,: . :i;:_.: .:i:: _:: .. • ::-!i:::: !:: :i:.::::?: :.i:!:i: ::!:.: .:: :: : ii_ / ::i::!_:!_?i: :.:::::: Caution: Do not attempt to use a "power converter" to use your AC adapter/charger on a power source other than 120 volts, 50/60 Hz, or the adapter/charger and camcorder may be damaged. If you wish to operate the AC adapter/charger on a power source other than 120 volts, 50/60 Hz, use only a transformer-type power converter.
P0 ring the Camcorder :: Using the Battery to Power Your Camcorder Charging the Battery The battery must be charged before it can be used the first time. Charging will take approximately two hours depending on the condition of the battery. When fully charged, the battery should supply approximately 60 minutes of operating time (depending on how much you use zoom and pause). To extend tirne, turn off the camcorder's power when not in use.
Using the Battery to Power Your Camcorder CAMERA/OFF/VCR BATTER Y EJECT Switch Lever Rechargeable Battery Hold Battery Flush and Slide Down Align Arrows Attach Charged Battery 1. Align reference Remove arrow on battery arrow on camcorder. 1. Slide CAMERA!OFF/VCR with Hold battery flush against camcorder it down in the direction the Battery 2. Press and hold BATTERY while sliding of the arrow as while sliding camcorder. battery to OFF. EJECT up and off the shown. 2.
Using the Battery to Power Your Camcorder Battery Care • Your battery will provide better service and longer performance if you charge it before and after use, and store it at normal should be charged temperature of 32"F-95°F prevent damage. • Do not operate at a (0°C-35°C) the battery temperatures below above 95°F (35°C). will decrease at temperatures Operation time at extremely low temperatures. room temperature. • The battery damaged if operated above 122°F (50°C).
Check Battery Power (Battery Level Indicator) n Battery Level Indicator Display in Viewfinder When DISPLAY is pressed, the battery level indicator ( ,_m ) appears in the camcorder's viewfinder to show how much battery power rechargeable battery. This indicator • After a while, only m appears. the battery or attach adapter/charger before use the camcorder. on the tape. • When the battery is fully charged, display shows ,sam the battery reaches the empty _ will start flashing.
Using the Optional To power Thomson your camcorder need the optional Car Cord Adapter from the cigarette car cord adapter DCC096 lighter socket shown The DCC096 car cord is especially designed the 9.6-volt input jack on the camcorder. Caution: :Me DCC096car of a car, truck, or RV, you on page 59. to convert power from a 12-volt battery to cord is designed to be used only with vehicles having 12-volt negative ground electrical systems.
We recommendthat good quality cassettesbe usedwith your camcorder.Use of poor quality tapesor tapesthat havebeen damagedor mishandled can contaminatethe video heads,resulting in a snowy picture or no picture at all during playback. Because there is no control over the type of tape purchasedor rented by consumers,head cleaning is not covered under warranty. It is considered normal maintenance.
Inserting and Removing Cassettes Tab STOP/EJECT cassette with I _.... safety tab facing:: _indo:ws fadifig :: should slide compartment. cassette down into place. ._ Tape Windows Press Here to Close 3. Insert 1. Attach a power source to the camcorder (either a charged battery or adapter/charger). 2. Press STOP/EJECT camcorder Cassette cassette 4. Gently on the top of the to open cassette Care and Storage : : :' : ::::_:: :: vertically in their protective cases at normal room temperatures.
Traveling Tips Write down your camcorder's serial number and keep it separate from the Carry your camcorder in a carrying camcorder camcorder is lost or stolen, you will be able to identify it. specially designed soft case. An ordinary suitcase or carry bag does not offer the protection your camcorder needs. Treat Make sure you have any plug adapters your camcorder when traveling. when traveling. If your you need before taking your camcorder other countries. Consult your dealer.
STOP/EJECT F.FWD (Fast Forward) { REW (Rewind)/REVIEW CAMERA/OFF/VCR Switch Microphone Quick • Press REW/REVIEW Review Press REW/REVIEW OFF/VCR when is in CAMERA to the beginning. CAMERA/ few seconds will play back the last of the recording, tape to its previous record pause. position, Tape Positioning When CAMERA/OFF/VCR the camcorder can quickly return fast-forward the and return to is in VCR and is in the stop mode, or rewind the tape Press STOP/EJECT to stop rewinding.
Program AE (Auto Exposure) Program auto exposure automatically selects the shutter speed and adjusts the iris according to the shutter speed. AE:60 Viewfinder When DISPLAY is pressed, 1/500, the AE indicator for the shutter speed selected (1/60, 1/100, 1/120, 1/180, 1/250, 1/350, Auto Focus :. : - Display _,: ' 1/750, 1/1000, 1/4000 second) viewfinder. 1/1500, appears 1/2000, or in the _:_'_ The camcorder will focus on the subject in the center of the viewfinder.
Electronic Indexing Each time you begin recording four hours), the camcorder (after the camcorder will automatically has been turned record off for at least an index mark at the beginning of the new recording. When called you play back the indexed tape in a VCR that has a compatible indexing feature "VHS Index Search System," the invisible marks can be located automatically. See your VCR owner's manual for index playback instructions.
The camcorder's viewfinder is a miniature monitor that displays the picture seen by the camcorder when recording. The viewfinder also can be used for viewing the tape during playback. When carrying or storing the camcorder, to prevent possible damage. return the viewfinder Viewfinder to the original position in Eyepiece operating position Viewfinder -- ° in carrying or storing position Pull / Caution. 1. Grasp _lling the viewfinder on the eyepiece and rotate it horizontally.
Eyepiece BRIGHT Control 0 BRIGHT Control Viewfinder by turning brightness can be adjusted the BRIGHT control. This does not affect the picture actually recorded by the camcorder. Tilt Adjustment For convenient viewing, :::::::_' you can rotate the eyepiece about 225 ° degrees. force the eyepiece aroun& ::-_s: will damagethe! _::_i _ eyepiece and/or,the camcorder ....
@ @ ® @ ® Tape Counter Memory Stop (M) AE Shutter Speed -Electronic Imapg...-_ Time Remaining Stabilizer_ FADE INDEX NO Battery Level TAPE Zoom and INDEX Digital Effects A/V Status DUB 10 30AM -® REC TAPE, NO TAPE, and TAPE END Time and Date Viewfinder AE (Auto Exposure) Displays Shutter Speed • Select 16X9 to make a recording that will be played back on a 16 x 9 wide screen TV. The shutter speed selected by the camcorder appears here. It is not recorded on the tape.
A V (Audio/Video) }UB DA TE/TIME DISPLAY CAMERA/OFF/VCR Power Zoom Buttons - EIS (Electronic Image Stabilizer) Button for CC439 Model Only FADE INST. (INSTANT) (_) DIGITAL EFFECTS ZOOM Tape Counter with Memory Stop (M) The tape counter helps you locate tape segments. It is not recorded on the tape. • Press DISPLAY on or off. to turn memory stop Details are on page 36. Time Remaining ( z_ m ) This display shows the amount of recording or playback time remaining on the tape.
Set the Time and Date REW (Rewind)/REVIEW CAMERA/OFF/VCR [ . CAMERA/OFF/VCR CAMERA. . 5. When Attach a power supply (battery or adapter/charger) to the camcorder. Press and hold the small button the display Forward) digit is displayed, The cursor will move to the next part of the display. on and place in lets you know which the correct press STOP/EJECT. Press DATE/TIME to display the date and time in the viewfinder. A flashing cursor (Fast STOP/EJECT DATE/TIME . F.
Recording Date and Time, Date, or Date and Title on Your Tape The time and date, date only, or date and title can be recorded oll your tape. Whenever one of the displays appears in the viewfinder, it will be recorded. The camcorder also has auto date and auto title features.
Using Power Zoom Buttons Power Zoom Buttons T = Telephoto W = Wide Angle EFFECTS (Instant) ZOOM and Zoom ZOOM _ZOOM Level Indicator When DISPLAY is pressed so the display appears in the viewfinder and the power zoom button is pressed, the zoom level is displayed in 10 steps for several seconds. • Press "T" to move the lens in the "telephoto" "wide-angle" direction. (close-up) direction. Using INST. (Instant) ZOOM Instant Zoom Indicator • Press INST.ZOOM to magnify the subject 1.
The digital processor in this camcorder allows you to record pictures and add special effects, such as, 16X9, a negative image, 130 times digital zoom feature, a symmetric image (obtained by placing a mirror at the center of the screen), DIGITAL Repeatedly Press DIGITAL 16X9 Mode EFFECTS Negative ZM:2 Mode MOSAIC Normal image.
16X9 Mode The new 16 X 9 TV format provides a 30% wider picture than conventional TVs of the same height. The 16 X 9 recording mode lets you make recordings compatible with this new format. When the 16 X 9 mode is activated, the camcorder records black bars at the top and bottom of the picture to produce the wide-screen effect. This is known as "letter box" recording. When played back on a standard size TV, black bars appear in the picture. Do not use this recording mode unless you have a 16 x 9 TV.
Negative Recording k.'- Negative l° Mode Place the camcorder Normal in record pause. 2. Press DISPLAY and repeatedly press DIGITAL EFFECTS until NEGPOS appears in the viewfinder. The image in the viewfinder will become negative. Mode 3. Press REC/PAUSE 4. Press DIGITAL recording restored. to start recording. EFFECTS when in pause until normal mode is Digital Zooming Zooming The digital zoom feature zoom in on a subject of up to 130 times.
Half-MirrorRecording Mirror Normal Mode The digital effects feature lets you display a symmetric image on the left and right, obtained by placing center of the screen. 1. Place the camcorder a mirror in record at the pause. 2. Press DISPLAY and repeatedly press DIGITAL EFFECTS until MIRROR appears 3. Press REC/PA USE to start recording. 4. Press DIGITAL recording restored.
The electronic image stabilizer (EIS) corrects slight shaking of images during some recording modes (only on model CC439) • While zooming in on a distant object. • When recording an approaching small object. • When recording while walking or riding in a vehicle. • When recording through a vehicle's window. _IS Button To Use EIS Button 1. Press EIS to display viewfinder. _ in the 2. Press REC/PAUSE to start and stop recording. 3.
You can add a professional touch to your recordingswhen you fade in and out of scenes. Both the picture and sound will gradually appearor disappear. The speedof the fade is controlled by the camcorder. FADE Select the Type of Fade You can select white, wipe, zoom, or black-and-white fade. Press DISPLAY to display the fade mode icon. • • 34 picture. B/W appears in the viewfinder. Select white fade to fade in and out from/to a white screen. in the viewfinder.
Repeatedly Press FADE % [] White Fade YEL Yellow Wipe Fade Black Wipe Fade [_ BLU Blue Wipe Fade No Fade B/W F$-tGRN Black-and-White Zoom Fade Fade Out Fade In 1. Place the camcorder 2. Repeatedly mode. Green Wipe Fade Fade in record press FADE pause. to select fade Note: The last fade mode used will Note: The last fade mode used will appear the first timeyou press FADE. 3. Press REC/PA 1. During recording, repeatedly press FADE to select the fade mode. USE to start recording.
The tapecounter acts asa handy referenceto help you locate tape segments. CAMERA/OFF/VCR RESET REW/REVIEW DISPLA Y MemoryStop The tape counter's _ ! -_i:._ _:! memory :: F. F WD ' , : : stop helps you locate , _' a certain memory stop is turned on, the tape will stop automatically rewind when the tape counter reaches "O000M." Using Memory ,_-..::_:i_'_:.!i_ '_:i'":_!.i.._._:_.::. point on the tape. When during fast forward or Stop: 1. Press DISPLAY to display counter with "M.
ProEdit ®System i Q Flying Q Edit Search lm Erase Head m m m Audio Dub A/V (Audio and Video) Dub Titler The camcorder incorporates a complete package to make it easy and fun to edit your home videos major ProEdit ® System features are described of advanced editing like a professional. features The here and on the following pages. Flying Erase Head A i --- A separate headwheel erase head is mounted on the spinning (hence the term "flying").
Audio Dubbing (Connection for Model CC439 Only) This illustration which applies to the model CC439 shows how to connect an audio device to model CC439 camcorder using the AUDIO 0 UT j acks. Audio dubbing operation is explained on the following page. A V DUB Button m A V OUT/IN Switch_ (This switch applies to CC439 only.) r--AUDIO --1 IN OUT VCR or Tape Deck '"_ J] ..... _, " Audio/Video Cable White ' _,J ........ _ '_:_ ........
Audio Dubbing The audio dub feature lets you record new audio (sound) on a previously recorded tape without erasing the original video (picture). The previous audio is erased and replaced with the new audio. - The audio dub feature increases your editing flexibility. Video segments can first be assembled and then a single narration or music background can be added. The new audio can be added: • You can speak into the camcorder's microphone.
Audio and Video Dubbing (Connection for CC439 Model Only) This illustration which applies to the model CC439 shows how to connect an audio/video device to model CC439 camcorder using the A UDIO/VIDEO jacks. Audio/video dubbing operation is explained on the following page. A V DUB Button m m A V OUT/IN Switcl ff-r-_--l_ (This switch applies to CC439 only.) ,, ,," Yellow Jack White Jack " i ol White Audio Plug ;# i_ AUDIO OUT VIDEO OUT _ .
J: Audio and Video Dubbing The audio and video dubbing feature lets you record new audio (sound) and video (picture) on a previously recorded tape in the camcorder. i_ • !, _. The source for the dubbing is: • the camcorder's built-in microphone and camera (applicable to CC434 and CC439) or • a source connected to the AUDIO/VIDEO side of the CC439 camcorder only. :_, jacks on the _Y To Audio and Video Dub 1. Press and hold the small button on CAMERA/OFF/VCR to VCR. while sliding it A/V 2.
k- Titler The camcorder's w m m built-in titler can store a title in memory. The created title can be displayed recorded at any time. !4' and 'hi; The built-in character register contains over 45 different characters for creating your titles. The title can contain up to 32 characters on two lines• !f;; 3, k, 2' '?, .'r 2. CAMERA/OFF/VCR Title Select - (Also REW/REVIEW) TITLER Title Select + polo • l _ (Also STOPIEJECT) }ii - %; . "L? "5 .A (. /! Y 42 .° .
To Create a Title See the "Chart 1. Attach a power source to the camcorder, press and hold the small button on CAMERA/OFF/VCR while sliding it to CAMERA. 2. Press TITLER to display titler graphics in the viewfinder. A flashing cursor will appear. 3. Press EDIToADV to move the flashing cursor to the place you want to begin your title. 4. Select the first character for your title by pressing the Title Select + button or the - button until the character you want appears in the viewfinder.
Recording a Title on a Tape in the Camcorder To record a title on a tape in the camcorder, follow the steps below. 1. Attach a power source to the camcorder, slide CAMERA/OFF/VCR to CAMERA. 4. Press REC/PA the title. . Locate the place on the tape where you want to record the title. , Notes: If you record a title on a prerecorded tape, the audio and video will be erased where the title is inserted. There will also be a three-to-four second pause of blank tape before the existing audio and video return.
Make a recording of your home and contents to store in a safe place in case of fire or theft. Practice recording under a variety of lighting conditions. This will help you respond quickly whenever you see a scene you want to record. Fading in and out of scenes may make your videos appear rapidly from side-to-side while recording. A steady, gradual "pan" avoids blurting and "jitter".
To record on a tape on the CC439 camcorder from a VCR or TV monitor with AUDIO OUT and VIDEO OUT jacks, you will need an optional audio/video cable, such as VH83 shown on page 60. A V DUB Button (_)A V OUT/IN (This switch applies to CC439 only.
Installation O) Attach the white plug on one end of the audio/video cable to the AUDIO OUT jack on the VCR (or TV monitor). Note: If your VCR or TV monitor has stereo left and right AUDIO OUT jacks, attach the plug to the one labeled MONO. If one of the audio jacks is not labeled MONO, you may need a Y-adapter, such as AH25 shown on page 60, to hear both channels. Recording 1. A. Operation B.
REW (Rewind)/REVIEW CAMERA/O FF/VCR Switch in VCR position 0000 ._" F.FWD (Fast Forward) 0 STOP/EJECT TRA . "_-.::= "_,=:<' -'_: :7-.-:. Viewfinder Playback 1. Attach a power camcorder. supply ...... to the 2. Press and hold the small button on while sliding 3. Press STOP/EJECT and insert the Note: 48 it you want to play back. The camcorder can only play back tapes recorded at SP speed. .......... 4. Press PLAY to begin playback. TRACKING if necessary. CAMERA/OFF/VCR to VCR.
Playback Features Stop-Action Picture Pause During playback, you can view one frame of the tape. • Press REC/PA USE to stop the action. • Press REC/PA USE again to return normal playback. to Search During playback you can visually search the tape at a higher speed in forward or reverse. • Press and hold F.FWD to search the tape forward. • Press and hold REW/REVIEW Caution: Pause isdesigned momentary interruptions be used for aft extended to search the tape in reverse.
To connect the camcorder to a TV monitor (or VCR) with AUDIO IN and VIDEO IN jacks, you will need an optional audio/video cable, such as VH83 shown on page 60. If your TV is already connected to a VCR, you can attach the camcorder to the VCR and watch what the camcorder is recording or playing on the TV. A V OUT/IN Switch (This switch applies to CC439 only.) White AUDIO Jack AUDIO IN VIDEO IN Back of VCR or TV Monitor 7--L_" : :, ":.>_:j:z;Z%_:;.<.;, AUDIO IN k_.
Attach the white the audio/video IN jack Note: plug cable on the TV on one end of to the AUDIO the yellow If your TV (or VCR) has stereo attach the If one of the jacks is not labeled MONO, you may need a Y-adapter, such as AH25 shown on page 60, to hear both channels. plug on the same end of the audio/video VIDEO or VCR. left and right AUDIO IN jacks, plug to the one labeled MONO. Attach cable to the IN jack on the TV or VCR.
To connectthe camcorderto a TV without audio and video input jacks. You will needan optional RF output adapter(such as CRF95) and an optional coaxial RF cable (such asVH82 or VH85) shown oll page 60. Antenna I I", OR OR @ ', ' Antenna _\ Optional 300/75 ohm Transformer (such as 193983) Back of TV A V OUT/IN Switch (This switch applies to CC439 only.) \ \ \ \ Channel OR ",, I Iv_I'" \ ,,., \ IN FROM ANT Transformer Optional Coaxial RF Cable (such as VH82 or VH85) the VHF antenna fro
Playback Operation 1. Set the channel RF output selector adapter switch on the 5. Press PLAY on the camcorder. tracking on the camcorder, if necessary. to CH3 or CH4. output (3 or 4) you selected with the selector switch on the RF on the camcorder when you are finished 3. Press and hold the small button switch use the playback on page 49. 6. Press STOP/EJECT adapter. camcorder's are on page 49. • During playback, features described 2.
The color enhancementlight helps createbrighter, sharperpictures. Li LIGHT To Use the Color Enhancement 1. Attach the rechargeable AC adapter/charger camcorder. battery to power the on and place it in Notes: Turn on the light only when you need it. The power consumption of the is aimed two-thirds that of the camcorder. When the light is on, the operation time of tile rechargeable for the LIGHT switch. battery is reduced. Avoid bumping or shaking the light when in use.
Removing and Replacing the Front Case of the Light Light Bulb Front Case Reflection Plate Lower To Remove and Replace 1. To remove front case, press and hold the lower hook 2. To replace Light while removing Hook Case it. the front case, pass the bulb through the hole of the reflection plate, and attach the lower hook to the Notes: fingers. Make Do not touch the bulb with your It may shorten its service life. sure the front case of the light is properly attached replacing a bulb.
The shoulder -- when strap is designed to let you carry the camcorder you are ready to shoot -- bring the camcorder from your shoulder to shooting position and in one quick movement. Cautions: viewfinder viewfinder When carrying the camcorder with the shoulder strap, place the in its original position_: :'This::helpsprevent possibledamage to the from bumping ag_ns@our body as you move .... : _i;:_! Make i i:' :!I_::__;.._ :;::., ::_:i :.,_:::_::} ...... ": ::. _:::::_::-..
The carrying case provides protection for your camcorder below for details on packing your case. _'[ Two Hour Battery and its accessories. See I., Type__ _ (Optional) __----_ __(_) - Audio/Video Camcorder Cable (Optional) One Hour Battery Type [ (Optional) • _, J / Adapter/Charger This equipment comply has been tested and found to with the limits for a Class B digital device and RF lighting device, pursuant to Part 15 and part 18 of the FCC Rules.
ii Camera Section General Power requirement: Power _:_!!i i¢ii 9.6VDC consumption: Weight: Scanning: Frames 8 watts (normal) Dimensions: Video Recorder Fields/30 Image Sensor: 1/4" high/resolution, solid state CCD imager 4.4 lbs. (2 kg) 4-1/4"(W) x 8-3/8"(H) (108 x 213 x 334mm) 525 Lines/60 Tripod hole x 13-1/8"(D) Mount: One 1/4" x 10 threaded Lens: fl.
DCC096 DC (Battery) Car Cord This DC car cord enables you to operate your camcorder from your car, truck, or RV by plugging the car cord directly into the vehicle's cigarette lighter. Caution: Do not use any other (ar co_d with this camcorder. CPS014 AC Adapter/Charger This adapter/charger operates on 100240 volts, 50/60 Hz, so it can be used almost anywhere in the world to power your camcorder and recharge the EP096FS battery supplied with your camcorder. It also charges battery.
VH83 Audio/Video Cable This six foot audio/video connect your camcorder dubbing cable is used to to a VCR or TV monitor to copy tapes. CRF95 RF Output Adapter This adapter is used with coaxial RF cable (VH82 or VH85) to connect your camcorder to a standard TV (one without audio/video input jacks) for playback. If your antenna cable is the flat twin-lead type attached by two screws, you will also need a 300-75 ohm transformer such as 193983.
Removing the Lens Hood The lens hood can be removed so you can attach optional accessories, such as wide- angle lens, lens extender, or lens filter kit. Do not grasp the end of the lens hood. Attach the lens cap over the lens hood, then turn them counterclockwise to remove them. Attaching Remove Accessory the lens hood as shown Turn the accessory tightened Lens firmly, All specifications lens clockwise above. into the camcorder's lens. Make sure the lens is but do not over tighten.
Using an Optional Mounting Tripod the camcorder and produce excellent on a tripod, such as AC093, will keep the camcorder steady video results. AC093 Deluxe Tripod This tripod's fluid effect head provides smooth camera pan and tilt. Its quickrelease mount makes it easy to attach or remove the camcorder. The grooved, tubular 3-section leg design folds down to 24" when not in use and weighs only 4-1/4 lbs.
Order Form for Camcorder Models CC434/CC439 _j Description Soft Camcorder Part No. AC202 Price $ 49.95 AC093 $ 59.95 AH25 $ AC Adapter/Charger CPS014 $219.95 RF Output CRF95 $ 69.95 DCC096 $ 49.95 Battery EP096FS $ 69.95 Rechargeable Battery Cable Transformer EP096FL VH54 $ 79.95 $ 2.95 RFCoaxial VH82 $ 6.95 VH83 $ 5.95 VH85 $ 7.95 193983 $ 10.00 221111 $ 12.95 227327 $ 10.35 232595 $169.95 233328 $ 13.
Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE IMPORTANT: YOUR CREDIT CARD Copy complete account number from your VISA card F-T-]--_I I IMPORTANT: Copy complete account number from your MasterCard IIII I I__FT-_ Expirationdace:r-'-]'_r-_ I[-T--r-N r-T-]---_ I I I I I Cop5, Number above your name on MasterCard IMPORTANT: _ Expiration date: _ Copy complete account nmnber from },our Discover Card FWFq-1 I I I I II I I I IFI---I-_ Expiration date: AUTHO
i!i:i!i!_!:i!_i To order accessories, contact your local Dealer. If a dealer is not nearby, you can also follow the directions telephone or direct-by-mail. United States and Canada below to order by Orders To place your order by phone, have your Visa, MasterCard, or Discover Card ready and call the toll-free number listed below between 8AM and 8PM (EST) Mon.- Fri., or 9AM - 5PM (EST) Sat. Use this number items listed on this order form.
Keep dust and grit from entering the camcorder's cassettedoor. Dust and grit are abrasiveandcauseexcessivewear to both the camcorder's recording and playback headsand cassettes. Do not usestrong or abrasivedetergents when cleaning your camcorder. They may damagethe camcorder. Before handling your camcorder,make sure your handsand face arefree from any chemical products suchas suntan lotion, as it may damagethe finish. Always replacethe lens cap on the lens when the camcorder is not in use.
Cleaning the Camcorder To clean the camcorder's exterior, remove any power camcorder and gently wipe it with a clean soft cloth. source connected Caution: Use of strong cleaning products, such as those contaimng alcohol or benzine, the camcorder. Cleaning the Camcorder's To clean the camcorder's Lens ..................
,i_:i_ _.__:,:_,:_:_ Troubles sometimes the help of a service are caused by simple "faults" technician by first checking that you can easily conect and adjustments i!i!_ without a few basic remedies. Before you call or take your camcorder to an Authorized look below for the type of trouble you are experiencing. checks :::__+_.__ _: ,.i_!__ :_i_i _i_i4__i!_!_+_ _ v_ _:_.i,i_i_i_!! RCA Camcorder Servicenter, Then perform the simple listed for that trouble.
Checks and Adjustments: Trouble Tape Stops During Rewind or Fast Forward The tape counter's memory-stop may be turned on. When an "M" appears behind the tapecounter display, the camcorder will stop rewinding fast-forwarding when the counter reads "O000M". Press the REW/REVIEW continue, Camcorder feature Remains or F.FWD or press DISPLAY • Press REC/PA USE to return button again to to turn off memory to normal or stop. playback.
AE Shutter-Speed or INDEX Indicator Does • CAMERA/OFF/VCR switch must be in CAMERA, and press DISPLAY to display the indications. Not Appear in Viewfinder Date and Time (or Date) were Recorded on the Tape Date and time (or date) will be recorded on the tape whenever they appear in the viewfinder. Press DATE/TIME to remove them from the viewfinder when recording. Date and Time Appear Incorrect • Make sure the date and time have been set. on page 26. • The camcorder's recharging.
You can reach Thomson at the following number: Thomson 800-283-6503 Camcorder number from 8 a.m. to 5 p.m., CST Monday - Friday for U.S. customers only of purchase ready when you call. If your unit is out of warranty, we will quote the cost of a repair to you. If we are unable or replacement your problem over the phone, we will gladly service your unit or exchange it for a new or, at our option, refurbished camcorder.
What • your warranty Any defect 3. covers: in materials and your evidence or workmanship. 90 days for labor charges. • One year for parts. The warranty period and you will be provided refurbished unit. for rental units begins 4. If the repairs warranty, with the first rental or 45 days from date of What 1. the initial 90 days your camcorder refurbished with a new or unit, or repairyour The option • will be no to our phone representative. purposes.
Make sure you insure case of damage your shipment in Include with the shipment: • Evidence • Take your unit to the Authorized • Camcorder Servicenter of your choice. Show the Authorized RCA Camcorder or loss. of purchase date, such as a bill Servicenter of sale, to verify your unit's warranty purchase eligibility. • • A brief note describing your camcorder's problem.
A A. (Audio) DUB Indicator ..... A!V DUB Indicator ............. Accessories, Included CAMERA/O FF/VCR Switch..5,7,12,19, ..... 26-27,39,41,42-44,47,48,51,53 24,39,41 24,41 .............. Car Cord, Optional 3 Accessories, Optional .......... Accessory Lens, Attaching ......... 58-65 61 Accessory 63-65 Order Form .......... Adapter/Charger, Using Adjustments and Checks .......... ........ 4,10 68-70 15,59 Card, Registration ................. Care and Maintenance ..........
FADE Button ............... FADE Indicators 8,24,35 .............. 24,35 Fading ........................ First-Time Operation ............. Flying Focus, Playback Erase Head ................ Auto and Macro ............ . .52-53 35 3-9 without Audio/Video Inputs Playback, First .................... Playback, Viewfinder ............. 37 20 Plug Adapter, Optional ............ Power Zoom Buttons ........ 10 24-25,28 H Handstrap Powering ...................... 5,9 I INDEX Indicator .......
Solving Problems .............. 68-70 SP(StandardPlay) Speed .......... 16 Specifications ................... 58 StatusDisplays .................. 24 Stop Action Pause................ 49 STOP/EJECT ...... B ut_on Unpacking the Camcorder Using a Tripod Using Using Adapter/Charger the Rechargeable 16 1-2 END Indicator ........... Indicator ............... Tape Copying ........... 24-25 24-25 46-47,50-51 Tape Counter ................. Tape Positioning .................
_11__ -_I_I __L_ _li_ IfI
Need Assistance.9 We want to help! U.S. Consumers: Customer Service 800-336-1900 Accessories 800-338-0376 Canadian Consumers: English French Please 800-522-0338 800-522-0445 do not send any products Indianapolis address on the carton. service listed in this manual This will only add delays or in for your product.
