Manual

Optional Car Cord Adapter
The optional DCC08 car cord shown on
page 70 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV. It converts
12-volts to a 6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
Use the DCC08 Car Cord Adapter __,____!!
Cigarette
Lighter Socket
Power
POWER Connector
Indicator
Optional DCC08 Car
Cord Adapter
1. Set the POWER switch to OFF to tum
.
off the camcorder., The power ....
indicator on the camcorder turns off.
If the battery or DC cable is attached
to the camcorder, remove it.
3. Hold the top of the power connector
flush against the camcorder, and press
•the bottom of the power connector
down until it locks into place.
4. Take the vehicle's cigarette lighter out
of the socket.
5. Insert the car cord's cigarette lighter
plug into the, vehicle's cigarette lighter
socket. The power indicator on the car
cord adapte r lights.
6. Set the POWER switch to CAMERA to
turn on the camcorder. The power
indicator on the camcorder lights.
16