Manual

Insert and Remove Cassettes
SP/SLP Button
EJECT Button
Ta e Wheel
Push Here to
Close Cassette
Compartment
"Tape Window
Before inserting a cassette, turn the tape
wheel on the side of the cassette in the
direction shown to remove any slack in
the tape.
1. Press EJECT. The cassette holder
opens automatically.
2. _Insert the cassette with the tape wheel
facing:up and tape window facing out.
3. Press on the area labeled PUSH until
the cassette holder locks into place.
Cassette Care and Storage
• When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold might damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
anU other devices.
Keep dust from entering the cassette
compartment. All dust is abrasive and
causes excessive wear on the tape and
the camcorder's recording or playback
heads.
Do not use cassettes with damaged or
spliced tape.
Do not use acassette if it has been
damaged or exposed to moisture. The
tape might j_'and/or damage your
camcorder. 3-_"
23