Manual

Adapter/Charger
The adapter/charger attaches Io the camcorder and lets you power your camcorder
directly from standard household power, The adapter/charger operates on 100-240
volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery,
'lb AC 100-240,
50/60 Hz
Adapter/
Charger
Jack
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapler/
charger.
2. Connect the other end of the DC cable
io the DC in jack on the camcorder as
shown above,
3. Plug the adapter/charger's plug into
the nearest AC outlet (100-240V,
50/60Hz).
CAUTION; DO not use this adapter/
charger for any other propose other
than charging the FB1260 or 244265
battery pack or supplying power to the
camcorder.
Remove Adapter/Charger
1, Unplug the adapter/charger from the
wall outlet,
2, Remove the DC cable from the
adapler/charger and camcorder,
Using an Optional Plug Adapter
An optional plug adapter might be
required in some countries.
Optional AC / AC 100-240V
PLugAdapter
1, Plug the adapler/charger's plug inlo
the AC plug adapter.
2, Plug the AC plug adapter into the AC
outlet.
12