Manual

Use the Battery to Power Your Camcorder (continued)
Hold Battery FLush
and Slide
CHG
(Charge)
'lb AC Wall
Outlet 100-
240 Volts_
50/60 Hz.
REFRESH Adapter/Charger
Indicator
REFRESH /
Button
Caution: When a battery is attached to the adapter/charger, do not turn them
upside down. The battery may fall offand be damaged or cause inj m'y.
Charge the Battery
if the DC cable is altached io the DC OUT
jack on the adapler/charger, remove it.
1, Align reference mark on baltery with
mark on adapter/charger.
2, Hold the batlery flush against the
adapler/charger and slide it in the
direction of the arrow,
3, Plug adapler/charger into nearest AC
outlet (100-240V, 50/60Hz).
4, if the batlery is properly connected,
the CHG indicator flashes.
Note: if you try to charge a battery that
has not been charged for a long period of
time, it may take a few minutes for the
CHG indicator to flash.
5, Afler the batlery is charged, the CHG
indicator stops flashing and lights,
6, Remove the charged battery by
sliding it off the adapter/charger.
7, Attach the charged batlery to the
camcorder.
Use the REFRESH Button
The baltery provides increased
operation time if you "refresh" it after
five chargings, The refresh feature
"refreshes" the battery by complelely
discharging it.
1, Attach baltery to adapter/charger.
2, Press REFRESHI The REFRESH
indicator Lights and the batlery
begins discharging,
3, When discharging is completed, the
REFRESH indicator turns off; and
the CHG indicator flashes. The
baltery now charges.
14