Manual

Use the Battery to Power Your Camcorder (continued)
4. After the battery is charged, the CHG
(charge) indicator stops flashing and
lights,
5. Remove the battery from the adapter/
charger,
Battery Level Indicator
The battery level indicator appears in the
viewfinder and shows you the amount of
power in the rechargeable battery,
• When _ appears, the batleryis
fully charged,
Battery Care and Storage
• Recharging takes approximately 70
minutes for the FBI260 depending on
the battery's condilion.
• Refreshing takes approximately 3-1/2
hours for the FBI260 depending on the
baltery's condition,
• After repeated charging and use,
operation time gradually decreases.
When operation time is too short to be
useful, it is time to replace the battery,
• if the batlery discharging must be
stopped in the middle, remove the
baltery from the adapler/charger before
unplugging it from the AC outlet,
• if the batlery pack become too hot,
remove it from the charger and let it
cool down.
• Let a hot battery cool down before
altaching it to the AC adapter/charger.
(mmm
• As the power is used _l and
appear,
• When the battery power is almost
gone, _::_" flashes in the viewfinder.
/ I \
The camcorder rums offautomatically
after a few seconds, Set the POWER
switch to OFF to turn offlhe cam-
corder before replacing the batlery,
The battery level indicator is not recorded
on the tape.
15