Manual

Optional Car Cord Adapter
The oplional DCC08 car cord shown on
page 67 allows you to power your
camcorder from the cigarette lighter
socket of a car, truck, or RV, It converts
12-volts io a 6-volt ouq_ut.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
Cautions: The DCC08 is desigaaed to
be used only with vehicles having
negative ground electrical systems.
Use only car cord adapter DCC08 with
this camcorder. Use of any olhcr car
cord adapter might damage the
camcurdcr and void your warranty.
Use the DCC08 Car Cord Adapter
Power
'lb Cigarette
Lighter Socket
Optional DCC08 Car
Cord Adapter
1. Set the POWER switch to OFF to turn
offlhe camcorder. The power
indicalor on the camcorder turns oft:
2. If the battery or DC cable is attached
io the camcorder, remove it.
3. Hold the botlom of the power
connector flush against the camcorder,
and press the connector down unlil it
locks into place as shown above.
4. Take the vehicle's cigarelte lighler out
of the socket.
5. Insert the car cord's cigarelte lighler
plug into the vehicle's cigaretle lighler
socket. The power indicator on the
car cord adapler lights.
6. Set the POWER swilch to CAMERA to
turn on the camcorder. The power
indicator on the camcorder lights.
Caution: Make sure the camcorder's
power is turned offbefore removing
the car cord's plug from the cigarette
lighter socket,
16