Manual

Install the Clock Lithium Cell

The clock cell indicator d_aflashes for a few seconds in the viewfinder when

you turn on the camcorder if the cell is not installed or needs replacing,

Clock Cell

;jeer Here

to Remove Cell

Clock Cell

(+ Side Facing Out)

1. Make sure camcorder is turned oft,

and remove any power supply

attached to the camcorder,

2. Pull the clock cell holder out of the

clock cell compartment,

3. Insert the clock cell with the "+"

terminal facing out, and press it in.

4_ Place the clock cell holder into the

clock cell compartment, Be sure to

insert the holder fully into the

compartment.

Tu Remove Lithium Cell

To remove battery, insert a pointed

nonmetallic object between battery and

clock cell holder and lift.

Cautions: Li4aium cell battery. Replace only wilh 3-voll lithium cell - such

as CR2025. Use of other cell prcscars arisk of tire or explosion. Must be

disposed of properly. Nevcr handle punctured or leaking cell. Ma3 cansc

burns or personal injur,..

Keep out of the hands of children. Can cause death or injur_ if swallowed. If

swallow ed. consult a physician immcdiatcly for emergency _reatmenL

The lithium cell used in this device may explode resulting in a fire or chemical

burn if mistreated. Do nol recharge, disassemble, heat above 212°F 100°C/. o_

incmaratc.

Never use mclallic tweezers to hold the cell. and never short the + and - sides

of the cell.