Manual

Built-In Color Enhancement Light (continued)
Replace the Bulb Assembly
Carefully follow the instructions below.
The video light and bulb need lo cool for approximatcb 30 minutes after
the camcordcr has been used before the bulb assembl_ is replaced.
Do not louch the light bulb with your fingers, lflhe bulb is accidentally
touched, wipe it with a soft cloth. A dirty bulb mat cause smoke and have
a reduced service life.
'IS Replace the Bulb Assembly
1, insert a fiat nonmetallic object (such
as a plastic screwdriver) in the small
hole as shown.
3. Slide the new bulb assembly into the
camcorder until it is locked into
place.
Plastic
/
Screwdriver / Video Light
2. Pull on the sides of the bulb
assembly and remove it from the
camcorder.
57