Manual

2. Attach the adapter/charger. ToAC 100-240,
50/60 Hz
Adapter/
Charger
OUT
Jack
Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
• Connect one end of the DC cable
to the DC OUT jack on the
adapter/charger.
• Connect the other end of the DC
cable to the DC in jack on the
camcorder as shown above,
• Plug the adapter/charger's plug
into an operating outlet,
3. Adjust the handstrap to fit your hand.
JLENS
COVER
Control
• Lift the flap on the
handstrap and separate
the velcro strip.
/Handstrap
• Insert your hand, adjust
the strap to fit snugly,
refasten the strap, and
Strip (Under Flap) close the flap.
4. Rotate LENS COVER control to open lens cover.
4