Manual

Playback on TV (or VCR) with Audio/Video Inputs (continued)
Playback Operation and How to Copy Tapes on the VCR
1. A, Camcorder connected directly Io
TVI Turn on the TV and tune it io
the video input channel.
B. Camcorder connecled io VCR that
is already connecled to TV: Turn
on VCR and place it in the "line"
or "camera mode", (if your VCR
does not have a "line" or "camera
mode", consult the VCR owner's
manual,) Operate the TV as you
normally do to see the signal
coming from the VCR,
2. Set the POWER switch to VCR to
turn on the camcorder. The power
indicalor lights,
3. Press PLAY/PAUSE,
• During playback, use the playback
features on pages 60-61.
4, To copy what the camcorder is
playing, place a blank casselte in the
VCR, and press the VCR's RECORD
button,
Note: Make sure the memory_stop feature
is turned off (press COUNTER R/M) or the
camcorder enters play-pause when the
counter reaches M 0:00:00.
5, Press STOP when you are finished.
Caution: The unauthorized recording
of copyrighted material may infi'ing¢
the rights of others.
Viewing What the Camcorder is Seeing (or Recording)
1. A, Camcorder connected directly Io
TVI Turn on the TV, and tune it to
the video input channel.
B. Camcorder connecled Io VCR that
is already connecled to TV: Turn
on VCR and place it in the "line"
or"cameramode", (if your VCR
does not have a "line" or "camera
mode", consult the VCR owner's
manual,) Operate the TV as you
normally do to see the signal
coming from the VCR,
2, Set the POWER switch to CAMERA,
Note: Turn the TV's volume down to
prevent a high@tched squeal caused by
feedback.
3, Press the thumb trigger to begin
recording. You can walch what the
camcorder is seeing (or recording) on
the TV screen,
65