Manual

Trouble Checks and Adjustments ]
Date and/or time are
recorded on tape
Displays are recorded on tape whenever they appear
in the viewfinder, Remove them from viewfinder
when recording, Seepages 20-21.
When AUTO DATE is selected (POWER switch in
CAMERA AUTO), date display is automatically
recorded when you begin recording or change lhe
cassette, See pages 20-2!.
Date and/or time are Clock lilhium cell battery might need replacing,
incorrect See page l 7.
Date or time might need to be set. Seepages !8-!9.
Cannot set REC or Make sure there is a tape in the camcorder.
IN7: ;tZME for Check tape speed setting, Tape speed must be set
animation or time- to SP for time-lapse or animation recording.
lapse recording Make sure POWER switch is not set to CAMERA
AUTO to display the menu, See pages 50-53.
Cannot record at Record for at least five seconds at beginning of tape
beginning of tape to start tape running smoothly,
using animation or Use fade-in feature before starting to record at
time-lapse recording beginning of tape,
Tally light does not 7"ALL Y LAMP feature set to OFF in the 7"ALLY LAMP
light during recording menu, See page 54.
Vertical white lines This might occur when the background extremely
appear when shoot- contrasts with lhe subject,
ing bright object
Error number (EO1, Try disconnecting power source, Wait ten seconds
E02, etc.) appears in and then connect power source again. If error
viewfinder number does not disappear from viewfinder, consult
your Aulhorized RCA Camcorder Service Center.
Streaks in picture • Adjust tracking with P.AE and FADES buttons..gee
during playback or page 6!.
play-pause
75