Camcorder User’s Guide Changing Entertainment. Again.
Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product or AC charger to rain or moisture. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.
Table of Contents Table of Contents Chapter 1: Connections & Setup Parts Checklist ......................................................................................... 6 Buttons and Controls ............................................................................. 7 Getting Started ....................................................................................... 9 Unpack the camcorder and accessories .......................................... 9 Adjust the hand strap ..........................
Table of Contents Chapter 2: Using the Monitors Seeing What You Are Recording ......................................................... 26 Using the LCD Monitor .................................................................. 26 Using the Viewfinder ..................................................................... 27 On-screen Icons ..................................................................................... 28 Warning Icons ....................................................................
Table of Contents Chapter 5: Advanced Features Using the Menus For Advanced Adjustment ...................................... 56 Menu Definitions .................................................................................. 57 Camera Menu ................................................................................. 57 System Menu .................................................................................. 57 System Menu (continued) .............................................................
Table of Contents Tape Care and Storage ................................................................... 82 Things to Avoid .............................................................................. 83 Traveling Tips ........................................................................................ 83 Specifications ........................................................................................ 84 Customer Assistance and Service ........................................................
Chapter 1 Connections & Setup Chapter Overview: • Parts Checklist • Buttons and Controls • Getting Started • Powering the Camcorder • Using the Shoulder Strap • Setting the Date and Time • Setting the Tape Recording Speed • Setting the Tape Length Changing Entertainment. Again.
Connections & Setup Parts Checklist Make sure the box includes the items shown here: CHARGE DSC VIDEO REFRESH EJECT DIGIFECT AE F . P R R/M P ON STO AUTO AKE RET FADE/WIPE OFF 5 SEC.
Connections & Setup Buttons and Controls MENU/ BRIGHT/ TRACKING dial Viewfinder 5 SEC. REC button Power Zoom/ VOL lever LIGH COUNTER R/M T OF F AU TO ON P. AE FADE/WIPE DIGIFECT STOP R RETA KE F IGHT MENU/BR /TRACKING VOL 5 SEC. REC + /TBC + DY PIX STEA STEADY PIX™ button PL FF AY O A M Audio/Video jacks Power switch BATTERY RELEASE switch Recording Start/Stop button GE CHAR DSC O VIDE ESH REFR T EJEC DIGIFECT AE F .
Connections & Setup Playback buttons FEC T DIG I P. A E DIGIFECT button EJECT switch REFRESH button STOP HT LIG AUTO OFF ON R RETAKE R R/M NTE COU F IPE E/W FAD A H E JE C T C T IFEC DIG R G E P. AE H FAD E/W IPE P.
Connections & Setup Getting Started This section describes the basics on how to set up your camcorder to record for the first time. Refer to the other sections for detailed operation and feature options. Unpack the camcorder and accessories • The items shown are packed with the camcorder. If any pieces are missing or appear damaged, contact your dealer immediately. • Remove the plastic film that covers the front and side logos on the camcorder. Use your fingernail, not anything sharp, to remove.
Connections & Setup Adjust the hand strap 1. Lift the flap on the hand strap and separate the Velcro strip. 2. Insert your hand so your fingers can comfortably reach the buttons. 3. Adjust the strap to fit snugly. 4. Refasten the strap, and fold the flap back down. HT LIG COUNTER R/M TO F AU OF ON FADE/WIPE P. AE DIGIFECT STOP R E RETAK F HT MENU/BRIG /TRACKING 5 SEC.
Connections & Setup HT LIG TO F AU OF ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAK E F HT MENU/BRIG /TRACKING 5 SEC. REC VOL + + PIX/TBC FF AY O A M PL 2 STEADY AC power supply 1 DC IN jack Attach the power supply Since the battery must be charged before it can be used the first time, you need to use an AC outlet to power the camcorder. 1. Plug the small end of the power supply into the DC IN jack on the camcorder. 2.
Connections & Setup HT LIG Turn on the camcorder OFF ON P. AE O AUT FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC Set the Power switch to the desired setting, either automatic ( A ) or manual ( M ) record mode, powered ). off (OFF), or in playback mode ( + + STEA DY PIX/T BC PL FF AY O A M The POWER indicator comes on when the camcorder is turned on. OFF AY M A Automatic recording A places the camcorder into AutoShot™ mode.
Connections & Setup Insert a cassette tape /M 2. Open the LCD monitor fully or adjust the viewfinder. 3. With the camcorder set to A (automatic record), slide the EJECT switch until the cassette tape holder opens. Don’t force the camcorder open. 4. Insert a tape with the tape wheel facing up and the tape window facing out. P. A DIG E IFE CT IPE RR TE E/W UN Make sure the camcorder is connected to a power supply.
Connections & Setup MENU dial STOP T LIGH ON OFF R AUTO ER COUNT RETAKE R/M Use the LCD monitor or viewfinder to see what’s recording F IPE FADE/W CH EJ EC T VI DE RE O FR ES CT DIGIFE H AR GE P. AE Using the LCD monitor LCD monitor 1. Remove the lens cap. 2. Open the monitor 90˚ from the camcorder body. 3. Tilt the monitor 180˚ forward or 90˚ down as required for convenient viewing while recording. 4. To adjust the brightness of the LCD monitor, rotate the MENU dial.
Connections & Setup Start recording HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + 1. Remove the lens cap. 2. Set the Power switch to A (automatic record). (The POWER indicator comes on.) 3. Press and release the Recording Start/Stop REC appears in the button to start recording. ( viewfinder or LCD monitor (but won’t show up in the recording)). 4.
Connections & Setup OFF O AUT ON FADE/WIPE Turn off the camcorder HT LIG COUNTER R/M P. AE DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + STEA DY PIX/T 1. Set the Power switch to OFF. 2. Close the LCD monitor. BC PL FF AY O A M Powering the Camcorder OFF AY A You can power your camcorder with a battery or AC power. M DC IN jack PL Charging the Battery Power switch 1. Set the Power switch to OFF. 2. Make sure the battery is attached to the camcorder.
Connections & Setup Notes: • If a protective cap is on the battery, remove it before use or charging. • When charging a battery for the first time or after a long storage period, the CHARGE indicator may not come on. Remove the battery and try again. • Charge the battery in temperatures between 50˚ and 90˚ Fahrenheit (10-35˚ Celsius). • Charging times are based on a fully discharged battery and vary depending on ambient temperature and battery condition.
Connections & Setup Removing the Battery Slide the BATTERY RELEASE switch and pull out the battery pack. HT LIG COUNTER R/M TO F AU OF ON P. AE FADE/WIPE DIGIFECT STOP R E RETAK IGHT NU/BR /TRACKING 5 SEC. REC VOL + + TBC DY PIX/ SETA Refreshing the Battery PL FF AY O A M If you charge a battery before it has been fully discharged, the battery’s capacity may be reduced over time. We recommend you discharge or “refresh” your battery before recharging it.
Connections & Setup Battery Level Icon The battery level icon appears in the viewfinder or LCD monitor and reveals the amount of power left in the rechargeable battery. Note: The battery level icon is not recorded on the tape. This icon appears when battery is fully charged. The icon changes to show that you’ve used some of the battery’s power. As you use more of the battery’s power, the icon changes again. This battery icon flashes in the viewfinder or LCD monitor when the battery power is almost gone.
Connections & Setup Using the Power Supply The power supply attaches to the camcorder and lets you power it directly from standard household power. The power supply operates on 110-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery. 1. Plug the small end of the power supply into the DC IN jack on the camcorder. 2. Plug the other end of the power supply into a working AC outlet (110-240V, 50/ 60Hz).
Connections & Setup Using the Shoulder Strap The camcorder’s shoulder strap is designed to let you carry the camera from your shoulder and – when ready– bring the camcorder to shooting position in one quick movement. 1. Following the illustration, thread the strap through the eyelet. 2. Fold the strap back and thread it through the buckle. 3. Repeat the procedure to attach the other end of the strap to the other eyelet located under the hand strap. Make sure the strap is not twisted.
Connections & Setup Setting the Date and Time HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC You need to set the date and time before they can be displayed. + + BC DY PIX/T STEA FF AY O A M PL Date and time information is recorded onto the tape at all times, but its display can be turned on or off during playback (see page 69). MENU dial Set the Power switch to M (manual record). (The POWER indicator comes on.) 2.
Connections & Setup HT LIG O AUT ON P. AE Setting the Tape Recording Speed OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + STEA DY PIX/T BC You need to select the tape recording speed for the quality of recording you want. PL FF AY O A M 1. Set the Power switch to M (manual record). (The POWER indicator comes on.) 2. Press the MENU dial in. (The CAMERA MENU appears.) 3. Rotate the MENU dial to highlight TO SYSTEM MENU.
Connections & Setup HT LIG O AUT ON P. AE Setting the Tape Length OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC You need to select the tape length so that the camera can alert you how much time you have left on the tape. + + STEA DY PIX/T BC PL FF AY O A M MENU dial Set the Power switch to M (manual record). (The POWER indicator comes on.) 2. Press the MENU dial in. (The CAMERA MENU appears.) 3.
Chapter 2 Using the Monitors Chapter Overview: • Seeing What You Are Recording • On-screen Icons Changing Entertainment. Again.
Using the Monitors Seeing What You Are Recording To see what is recording, use either the LCD monitor or the viewfinder monitor. When the LCD monitor is open more than 25˚, the viewfinder turns off. When you close the LCD monitor, the viewfinder turns on. Using the LCD Monitor The camcorder’s LCD monitor is a miniature color screen that you can use for recording playback. 180° 1. Open the LCD monitor at least 25˚. The viewfinder turns off. 2.
Using the Monitors Viewfinder Eyepiece focus control HT LIG O AUT ON P. AE The camcorder’s viewfinder is a miniature monitor that displays in black and white. For convenient viewing, rotate the viewfinder up or down. OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK 5 SEC. REC VOL + + Using the Viewfinder BC DY PIX/T STEA Note: When the LCD monitor is open more than 25˚, the viewfinder turns off.
Using the Monitors On-screen Icons Several displays appear on the LCD monitor or in the viewfinder to aid in the operation of the camcorder. Although it may look crowded, all of the icons shown below do not appear on-screen at the same time. Also, not all screen icons are shown in the illustration. Refer to the icon descriptions that follow. SP –1 : 23 : 45 AT T40 1 2 0M I N REC S P T BC F I NE 1 5 +0 2 MWB P AU S E 5M I N 1 / 2S BR I GH T – – – – – – – – – – – + CONGRA T U L A T I ON S D E C 2 5 .
Using the Monitors Condensation: CONDENSATION, OPERATION PAUSED PLEASE WAIT appears if moisture occurs inside the camcorder. When this icon appears, wait at least one hour before using the camcorder again. TAPE END End of Cassette: Appears when a tape reaches its end during recording or playback. LENS CAP Covered Lens: Appears briefly after the power is turned on to either automatic or manual record mode and the lens cap is still attached.
Using the Monitors Special Effect Icons SEPIA Appears when you select SEPIA to give your recordings a browntone like old photographs. SPORTS Appears when you select SPORTS to record fast-moving action, such as sporting events. SD:SHADOW Appears when you select SD:SHADOW to darken the picture and reduce glare. HZ: HAZE Appears when you select HZ:HAZE to soften the picture and give it a misty white effect.
Using the Monitors Preset Titles • The preset title selected in the TITLE menu appears here. It will be recorded on the tape when it appears. M. W. B. (Manual White Balance) Icons The icon for the manual white balance selected in the M.W.B. menu appears here. MWB Appears when you select :FINE to record outdoors on a sunny day. Appears when you select day. :CLOUD to record outdoors on a cloudy Appears when you select tungsten lighting.
Using the Monitors Zoom Icon 4X Appears when you use the zoom lever. Bright and Volume Icons BRIGHT Appears when you adjust the brightness of the monitor with the BRIGHT dial. VOLUME During playback, the VOLUME icon appears when you adjust the volume of the speaker with the VOL control (also zoom lever). Exposure Icon +03 This icon appears when you are adjusting brightness manually using the EXPOSURE menu.
Using the Monitors Focus Icons Appear when you are adjusting focus manually using the FOCUS menu. The icons also flash when the auto-focus system cannot operate properly or you can’t adjust the focus any farther. These icons flash while you adjust manual focus (see page 66). Animation and Time-Lapse Recording Icons 15S Appears when you select the interval time for time-lapse recording ( 15S, 30S, 1MIN, or 5MIN; 15S=15 seconds, 30S=30 seconds, etc.).
Using the Monitors TBC (Time Base Corrector) Icon TBC Appears when the time base corrector is turned on (see page 46). Time Counter Icon M0:00:00 Appears during playback. It is not recorded. An M appears in front of the time counter when memory-stop is on (see page 47). Time-Remaining Icon 120MIN 34 Indicates the approximate time remaining on the tape.
Chapter 3 Recording Chapter Overview: • Recording Details • Recording Tips Changing Entertainment. Again.
Recording HT LIG O AUT ON P. AE Recording Details OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + STEA DY PIX/T BC Remove the lens cap. 2. Set the Power switch to A or M (automatic record or manual record mode). (The POWER indicator comes on.) 3. Open the LCD monitor or adjust the viewfinder. 4. Press and release the Recording Start/Stop REC appears in the button to start recording. ( viewfinder or LCD monitor (but won’t be recorded.)) 5.
Recording Self-Recording You can shoot yourself while viewing your own image in the LCD monitor. Open the LCD monitor and tilt it upward 180° so that it faces forward, then point the lens toward yourself and start recording. 5-Second Recording 5 SEC. REC button HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M You can record a scene for 5 seconds, providing quick scene transitions like those seen in TV programs. DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC.
Recording Retake /M CT IFE E DIG P. A RR TE E/W IPE UN EJECT F POWER REFRESH RETAKE CHARGE R FAD CO LIGHT OFF AUTO ON STOP You can also rerecord certain segments. 1. Make sure the camcorder is in the Record– Standby mode. 2. Press and hold either RETAKE button to reach the start point for new recording. Pressing forwards the tape and pressing reverses it. 3. Press the Recording Start/Stop button to start recording.
Recording Notes: • The zoom level icon moves during zoom. Once it reaches the top of the zoom icon bar, all magnification from that point is through digital processing. • During digital zoom, the quality of image may suffer. You can use digital zoom to magnify images to a maximum of 400 times normal magnification. HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK 5 SEC. REC VOL 1. Set the Power switch to M (manual record).
Recording MENU dial STEADY PIX button HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M Digital Image Stabilization is used to compensate for unstable images cause by camera shake, especially at high magnifications. DIGIFECT STOP R RETAKE VOL F 5 SEC. REC RIGHT ING MENU/B/TRACK + + Using Steady Pix™ BC DY PIX/T STEA To turn on image stabilization, press the STEADY PIX button. ( appears.) PL FF AY O A M To turn off image stabilization, press STEADY PIX again. (The icon disappears.
Recording Video Light Details /M P. A IFE DIG E CT IPE RR TE E/W UN Video LIGHT switch (CC6374 only) EJECT F POWER REFRESH RETAKE CHARGE R FAD CO LIGHT OFF AUTO ON STOP Even if the battery icon ( ) doesn’t blink due to low battery charge, the camcorder may turn off automatically when you turn on the video light, or if the video light is turned on when you start a recording.
Recording Recording Tips • To improve picture quality and color reproduction, try to make sure indoor scenes are well-lit. • Don’t move the camcorder rapidly from side-to-side while recording. A steady, gradual “pan” avoids blurring and “jitter”. • Use the viewfinder or LCD monitor to make sure the camcorder is level while recording so that your scene isn’t “tilted.” • Do not bump or tap the camcorder’s microphone while recording as this sound will be recorded.
Chapter 4 Playback Chapter Overview: • Playback Options • Choose Your Connection Changing Entertainment. Again.
Playback HT LIG O AUT ON P. AE Playback Options OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC The camcorder’s playback features include displaying still images and high-speed shuttle search. In this section, you’ll also learn how to connect your camcorder to a TV, VCR, or computer. + + BC DY PIX/T STEA PL FF AY O A M Playback features (Play, Pause, Forward, Reverse, Stop) can be handled using the camcorder’s buttons.
Playback Tips The playback picture can be viewed in the viewfinder (with the LCD monitor shut), on the LCD monitor, or on a connected TV (see page 52). • If a blank portion on the tape is played back, the screen may become black. This is not a malfunction. • LCD monitor/viewfinder indications: • When power is supplied from a battery appears. When power is supplied through the power supply, does not appear. • When a tape is stopped, no icons appear.
Playback TRACKING dial Adjusting the Tracking LIG HT OFF ON P. AE O AUT FADE/WIPE COUNTER R/M You may need to eliminate noise bars that appear on-screen during playback. The default setting is Auto Tracking. DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + STEA DY PIX/T BC 1) Press in the TRACKING dial for approximately 2 seconds. (MT appears). 2) Rotate the TRACKING dial until the noise bars disappear.
Playback Using Counter Memory /M IFE Counter Memory makes it easier to locate a specific tape segment. DIG P. A E CT IPE RR TE E/W UN EJECT F POWER REFRESH RETAKE CHARGE R FAD CO LIGHT OFF AUTO ON STOP 1. Press and hold the COUNTER R/M button for more than 1 second. (The counter resets to 0:00:00.) 2. Press COUNTER R/M for less than 1 second. (M appears.) 3. After recording or playback, press , then . (The tape automatically stops at or near 0:00:00.) 4.
Playback Shuttle Search IFE DIG P. A E CT /M RR TE E/W IPE UN Playback buttons EJECT F POWER REFRESH RETAKE CHARGE R FAD CO LIGHT OFF AUTO ON STOP Shuttle search allows high-speed searching in either forward or reverse directions. or during playback. 1. Press 2. To resume normal playback, press / . or . • During playback, press and hold The search continues as long as you hold down the button. Once released, normal playback resumes.
Playback Choose your Connection This manual includes information for some basic types of connections. You may also need to refer your TV and VCR user’s guides for specific instructions. Cassette tape adapter Using the Cassette Tape Adapter Before choosing a connection, you may find it easier to use the cassette tape adapter (supplied with CC6374 only). The camcorder uses a smaller size tape, but records in standard VHS format.
Playback VHS-C tape Inserting the Tape into the Cassette Tape Adapter Tape window 1. Before inserting the tape into the adapter, remove any slack in the tape by turning the tape wheel on the side of the tape. 2. Slide EJECT to the right to open the tape compartment lid. 3. Insert the tape with the tape window on the left and facing up. Tape wheel Allow the tape to drop into the adapter. Do not force the tape. Cassette tape adapter 4.
Playback Removing the Tape from the Cassette Tape Adapter EJECT switch 1. Slide the adapter’s EJECT switch to the right. The load detector extends from the side and the whirring sound indicates the tape is being released before the adapter’s tape compartment lid opens. 2. Use the access hole on the bottom of the adapter to push the tape up and remove it from the adapter. 3. Gently close the adapter’s tape compartment lid.
Playback TV or VCR LIG HT OFF O ON P. AE AUT FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAK E F RIGHT NG MENU/B/TRACKI 5 SEC. REC VOL + + C Y PIX/TB STEAD PL FF AY O A M 1 3 2 4 Connecting to a TV (or VCR) with Audio/Video Input Jacks To connect your camcorder to a TV monitor (or VCR) with audio/video inputs, you need an optional audio/video cable, such as VH83 (supplied with CC6364) (see page 93).
Playback HT LIG O AUT ON P. AE Playback on a TV (or VCR) with Audio/Video Input Jacks OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + BC DY PIX/T STEA 1. Turn on the TV and tune it to the video input channel or turn on VCR and place it in the “line” or “camera mode”. (If your VCR does not have a “line” or “camera mode”, consult the VCR owner’s manual.) Operate the TV as you normally do to see the signal coming from the VCR. 2.
Playback Tape Dubbing HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + STEA DY PIX/T 1. Following the illustration in this chapter, connect the camcorder and the VCR. 2. , turn Set the camcorder’s Power switch to on the VCR’s power, and insert the appropriate tapes in the camcorder and the VCR. 3. Make sure the VCR is in the appropriate AUX mode and the Record-Pause mode. 4.
Chapter 5 Advanced Features Chapter Overview: • Using the Menus for Advanced Adjustment • Menu Definitions • Using the Advanced Features Changing Entertainment. Again.
Advanced Features HT LIG O AUT ON P. AE Using the Menus For Advanced Adjustment OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + BC DY PIX/T STEA This camcorder is equipped with an on-screen menu system that simplifies many of the more detailed camcorder settings. PL FF AY O A M MENU dial Set the Power switch to manual record ( M ). (The POWER indicator comes on.) 2. Press in the MENU dial. The CAMERA MENU appears. 3.
Advanced Features Menu Definitions The following charts will help you get acquainted with the various menus and some brief definitions of their features. For more detailed explanation, refer to the corresponding sections. Camera Menu FOCUS Refer to Focusing (see page 65). EXPOSURE Refer to Exposure Control (see page 64). M.W.B. Refer to White Balance Adjustment and Manual White Balance Operation (see pages 67-68). TITLE Allows you to superimpose one of eight preset titles (see page 70).
Advanced Features System Menu (continued) 16 x 9 OFF Factory Preset: Doesn’t display black bars. ON Allows you to record black bars at the top and bottom of the screen to produce a cinema-like wide-screen effect. Allows you to set the tape length depending on the tape used (see page 24). TAPE LENGTH DISPLAY FULL Factory Preset: Make all of the icons appear on the LCD monitor/viewfinder during playback or recording.
Advanced Features TITLE LANG Allows you to select the language (ENGLISH, FRENCH, or SPANISH) of Instant Titles (see page 70). DATE/TIME Allows you to set the current date and time (see page 22). DEMO MODE ON Factory Preset: Demonstrates certain functions automatically. When DEMO MODE is set to ON and you have exited all menus, the demonstration starts. Operating the Power zoom lever during the demonstration stops the demonstration temporarily.
Advanced Features Using the Advanced Features LIG HT OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + Fade/Wipe Effects BC DY PIX/T STEA These effects let you make professional-looking scene transitions. Fade-ins or wipe-ins work at recording start, and fade-outs or wipe-outs work at recording end.
Advanced Features Wipes LIG HT OFF SHUTTER O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC Wipes in as a black screen from the top and bottom, closing over the image like a shutter. Wipes out as a new image, pushing open the black screen vertically from the center. + + BC DY PIX/T STEA PL FF AY O A M SLIDE MENU dial OFF AY M A Wipes in as a black screen moves in from the left to gradually cover the image.
Advanced Features Program AE With Special Effects 1. Set the Power switch to 2. Press P.AE repeatedly until the desired mode’s name and icon appear. (They are displayed for approximately 2 seconds, then the name disappears so that only the icon remains.) 3. To cancel the effect, press P.AE repeatedly until OFF appears. OFF is displayed for approximately 2 seconds. M (manual record). (The POWER indicator comes on.) Note: Only one mode can be engaged at a time.
Advanced Features HT LIG O AUT ON P. AE 2 S1/2000 (1/2000 sec. High Speed Shutter) OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + BC DY PIX/T STEA Captures faster action than Sports mode. PL FF AY O A M Notes: MENU dial OFF AY M A • The screen becomes slightly dark in the High Speed Shutter mode. Use in well-lit situations.
Advanced Features NEGA POSI (Negative Positive) The colors of a picture are reversed. MOSAIC Turns recorded scenes into a mosaic pattern. STRETCH Doubles the width of the picture horizontally. Note: Digital Effects can be changed during recording or during Record-Standby. Exposure Control This feature automatically adjusts the iris for the best available picture quality, but you can override it and make the adjustment manually.
Advanced Features HT LIG O AUT ON P. AE Notes: • To return to the factory setting, select AUTO in step 4. OFF FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + BC DY PIX/T STEA • To readjust exposure, repeat the procedure from step 2. PL FF AY O A M Focusing Auto Focus MENU dial The camcorder’s Full Range automatic focus system offers continuous shooting ability from close-up to infinity.
Advanced Features Manual Focus HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP Make the necessary viewfinder adjustments to use the viewfinder (see page 27). R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + BC DY PIX/T STEA 1. Set the Power switch to M (manual record). (The POWER indicator comes on.) 2. Press the MENU dial in. (The CAMERA MENU appears.) 3. Rotate the MENU dial to highlight FOCUS. Press in the MENU dial to select it. (The FOCUS menu appears.) 4.
Advanced Features White Balance Adjustment White balance refers to the correctness of color reproduction under various lighting. If the white balance is correct, all other colors will be accurately reproduced. The white balance is usually adjusted automatically. However, more advanced camcorder operators control this function manually to achieve a more professional color/tint reproduction. 1. Set the Power switch to 2. Press in the MENU dial. (The CAMERA MENU appears.) 3.
Advanced Features Manual White Balance HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP Perform Manual White Balance when shooting under various types of lighting. R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC + + BC DY PIX/T STEA 1. Follow steps 1 through 4 of the white balance adjustment, and highlight MWB. 2. Hold a sheet of plain white paper in front of the subject. Adjust zoom or position yourself so that the white paper fills the screen.
Advanced Features HT LIG Date/Time Insert OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC You can display the date and time in the camcorder or on a connected TV, as well as to record them manually or automatically. You should have already performed the Date/Time Setting procedure (see page 22). + + BC DY PIX/T STEA PL FF AY O A M MENU dial Set the Power switch to M (manual record). (The POWER indicator comes on.) 2.
Advanced Features HT LIG Instant Titles OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC The camcorder has 8 preset titles in memory. You can superimpose one of them over the video image. + + BC DY PIX/T STEA Instant Titles can be displayed in English, French, and Spanish. PL FF AY O A M MENU dial Set the Power switch to M (manual record). (The POWER indicator comes on.) 2. Press in the MENU dial. (The CAMERA MENU appears.) 3.
Advanced Features Animation HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK 5 SEC. REC VOL You can shoot a series of pictures, each slightly different, of the same object for a brief period of time. + + BC DY PIX/T STEA PL FF AY O A M MENU dial Set the Power switch to M (manual record). (The POWER indicator comes on.) 2. Make sure the recording mode is set to SP. 3. Press in the MENU dial. (The CAMERA MENU appears.) 4.
Advanced Features Time-Lapse HT LIG OFF O AUT ON P. AE FADE/WIPE COUNTER R/M DIGIFECT STOP R RETAKE F RIGHT ING MENU/B/TRACK VOL 5 SEC. REC You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time. + + STEA DY PIX/T BC PL FF AY O A M MENU dial Set REC TIME using steps 1-7 of Animation (see page 71). 2. Rotate the MENU dial to highlight INT. TIME.
Chapter 6 Other Information Chapter Overview: • Troubleshooting • Final Notes • Care and Cleaning • Traveling Tips • Specifications • Customer Assistance and Service • Limited Warranty • FCC and Industry Canada Information • Optional Accessories • Index Changing Entertainment. Again.
Other Information Troubleshooting If you’re having problems with your camcorder, try the solutions in this section. If the problem still exists, please consult your nearest RCA authorized service center. External noise and interference (from a TV, a radio, etc.) might prevent your camcorder from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC power supply, etc.); and then reconnect it and proceed as usual from the beginning.
Other Information Bright, crystal-shaped spots appear in the LCD monitor and the viewfinder. Sunlight is directly entering the lens. This is not a defect of the camcorder. The rear of the LCD monitor is hot. The light used to illuminate the LCD monitor causes it to be hot. Close the LCD monitor to turn it off or set the Power switch to OFF, and let the unit cool down. Colored bright spots appear all over the LCD monitor or the viewfinder.
Other Information Recording Problems Recording cannot be performed. Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some tapes have removable tabs. If the tab has been removed, cover the hole with adhesive tape. Recording does not start. The camcorder Power Switch has not been set to A or M (see page 12). Animation or Time-Lapse is not available.
Other Information The date and time displays disappear. If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder’s power off before disconnecting the power source. The wrong date and time are displayed/recorded. If you have not performed Date/Time Setting (see page 22), the date and time are not displayed/recorded correctly. Be sure that Date/Time setting is carried out. The tape won’t eject.
Other Information Final Notes Power • Perform charging where the temperature is between 10°C and 35°C (50°F and 95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete. • Charging times are for a fully discharged battery pack. • Charging time varies according to the ambient temperature and the status of the battery pack. • To avoid interference with reception, do not use the AC power supply near a radio.
Other Information Video Recording • When the Power switch is set to A or M and the LCD monitor is opened at an angle of 25˚ or more, the LCD monitor switches on and the viewfinder switches off automatically to save power. • The cassette tape holder can’t be opened unless a power supply is attached. • There may be a delay after you slide EJECT until the cassette tape holder opens. Do not use force.
Other Information Tapes • A power supply must be attached to load or eject a tape. • When loading a tape, it takes a few seconds for the cassette tape holder open. Never apply force to the holder or door cover as this might result in damage to the camcorder and void the warranty. • If the cassette tape holder does not open after a few seconds, close the holder door and try again. If it still does not open, turn the camcorder off, then on again.
Other Information Care and Maintenance Care and Cleaning After Using the Camcorder 1. Set the Power switch to OFF. 2. Open the LCD monitor at least 60˚. 3. Slide the EJECT switch to open the cassette tape holder, then remove the tape. 4. Press the area marked CLOSE to close and lock the cassette tape holder. 5. Close and lock the LCD monitor. 6. Slide the BATTERY RELEASE switch and remove the battery pack. 7. Reattach the lens cap. Cleaning The Camcorder 1.
Other Information Proper Care and Storage • Keep dirt from entering the camcorder’s cassette tape door. Dust and grit are abrasive and cause excessive wear to both the recording/playback heads and tapes. • Always cap the lens when the camcorder is not in use. • Before handling the camcorder, make sure your hands and face are free from any chemical products such as suntan lotion, as it might damage the finish. • The camcorder might be damaged by improper storage or handling.
Other Information Things to Avoid • Do not attempt to disassemble the camcorder. There are no user-serviceable parts inside. • Avoid operating the camcorder immediately after moving it from a cold location to a warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before inserting a tape. • In cold to warm conditions, condensation might occur causing the tape to stick to the recording heads and damage the camcorder or tapes.
Other Information Specifications Specifications Camcorder Format VHS NTSC standard Power source DC 11 V (Using AC power supply) DC 6 V (Using battery pack) Power consumption Viewfinder on: 4.0 W (CC6364) 4.5 W (CC6374) LCD monitor on: 5.2 W (CC6364) 5.4 W (CC6374) Video light: 3.0 W Dimensions (W x H x D) 206 mm x 112 mm x 118 mm (8-1/8" x 4-7/16" x 4-11/16") (with the LCD monitor closed and with the viewfinder fully tilted downward) Pickup 1/4" format CCD Lens F1.6, f = 3.9 mm to 62.
Other Information Customer Assistance and Service Customer Assistance and Service Customer Assistance and Service You can reach Thomson at the following number: 800-283-6503 (Toll free inside U.S.A.) Our toll-free camcorder number operates from 8 a.m. to 5 p.m. CST Monday – Friday for U.S. customers only Thomson provides a toll-free telephone number to help with any problems encountered with the camcorder.
Other Information Important information to customers who ship defective equipment to Thomson Consumer Electronics The Thomson representative who authorized the return of your equipment will give you an SR number over the phone. They will also provide you with instructions on where and how to return your camcorder. Write the number in large, clear characters on the outside of the box.
Other Information Limited Warranty Limited Warranty What your warranty covers: • Any defect in materials or workmanship. For how long after your purchase: • 90 days for labor charges. • One year for parts. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: During the initial 90 days • Exchange your camcorder with a new or refurbished unit, or repair your camcorder. The option will be ours.
Other Information To receive a replacement Camcorder before you return yours: Option I 1. Provide your Discover, MasterCard, or Visa account number and expiration date to our phone representative. This is for security purposes. If we receive your unit, excluding all accessories, within 14 days from the date you were provided the SR number, only items not covered by warranty will be charged to your account.
Other Information • A brief note describing your camcorder’s problem. • Your name, address and phone number. Return transportation, storage, handling, and insurance costs are your sole responsibility. We accept no liability in case of damage or loss. 4. The representative will advise the address to mail a cashier’s check or money order for payment if there are any out of warranty labor or parts charges and you elect not to use your credit card. 5.
Other Information How State Law relates to warranty: • This warranty gives you specific legal rights and you also may have other rights that vary from state to state. If you purchased your camcorder outside the United States: • This warranty does not apply. Contact your dealer for warranty information. Service calls that do not involve defective materials or workmanship are not covered by this warranty. Costs of such calls are the sole responsibility of the purchaser.
Other Information FCC and Industry Canada Information FCC Regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Other Information Optional Accessories We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your camcorder. The following pages have a selection of accessories to help make your memorable moments look and sound even better. These accessories are designed to make the process of recording and watching your videos more enjoyable. To order accessories, contact your local Dealer.
Other Information VH83 A/V Cable Replacement for the included A/V cable (CC6364). Used to attach the camcorder to an external component like a TV or VCR. Using the Optional AC088 Tripod Mounting the camcorder on a tripod, such as AC088, keeps the camcorder steady and produces excellent video results. This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-release mount makes it easy to attach or remove the camcorder.
Other Information If a dealer is not nearby, you can also follow the directions below to order by telephone or direct-by-mail. United States and Canada Orders To place your order by phone, have your Visa, MasterCard, or Discover card ready and call the toll-free number listed below. Use this number only to place an order for accessory items listed on this order form.
Other Information Accessories Order Form Description Part No. Price Super Lightweight Tripod AC088 $ 49.95 Soft Camcorder Case AC201A $ 34.95 Shoulder Strap ACS091 $ 12.95 Rechargeable Battery (1 hour) 244427 $ 49.95 A/V Cable VH83 $ 5.95 Extended Life Battery BB99L $ 69.99 Qty. Total All prices subject to change without notice.
Other Information Charge your order on your VISA,MasterCard, or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT: Copy complete account number from your VISA card ¤ Expiration date: IMPORTANT: Copy complete account number from your MasterCard s r r TM Expiration date: Copy Number above your name on MasterCard IMPORTANT: Copy complete account number from your Discover Card Expiration date: AUTHORIZED SIGNATURE Prices are subject to change without notice.
This Page Left Blank Intentionally
Index Index Symbols C 5-Second recording 37 Cassette adapter 49 Cassettes care and storage 80 record protection tab 13 Charge marker 17 Charging the battery 16 Choose your connection 49 Cleaning 81 Clock adjustment 22 Connecting to a TV (or VCR) with A/V Inputs 52 Counter memory 47 Customer assistance and service 85 A A (audio) and V (video) jacks 52 Accessories 92 carrying case 92 order form 95 tripod 93 Advanced features 60 Animation 71 Animation and Time-Lapse recording icons 33 Area marked close 13
Index F M Fade and wipe icons 32 Fade/wipe effects 60 FCC information 91 Final notes 78 Focus icons 33 Focusing 65 Manual focus 66 Manual white balance 68 Manual white balance icons 31 Menu definitions 57 MENU/BRIGHT dial 14 Menus 56 G O Getting started 9 On-screen icons 28 Optical zoom 38 Order form 95 Other icons 33 H Handstrap adjusting 10 I Important information 2 Industry Canada information 91 Insert a cassette tape 13 Instant titles 70 J Journalistic shooting 36 L LCD monitor 14, 26 LCD mon
Index Q T Quick review 37 Tape care and storage 82 Tape dubbing 54 Tape length setting 24 Tape length icon 33 Tape recording speed setting 23 Tape speed icon 33 TBC (Time Base Corrector) 46 TBC (Time Base Corrector) icon 34 Time counter icon 34 Time-Lapse 72 Time-remaining icon 34 Tips traveling 83 Title menu 31 Tracking adjusting 46 Tracking icons 31 Traveling tips 83 Troubleshooting 74 Turning off the camcorder 16 R Record protection tab 13 Recording icon 15, 36 playing back 15 Recording and playback
Index W W and T (zoom lever) 38 Warning icons 28 Warranty 87 White balance adjustment 67 Z Zoom level icon 32 Zoom lever 32, 38 Zooming digital 38 optical 38 zoom lever 38 Chapter 6 101
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. 10330 North Meridian Street Indianapolis, IN 46290 ©2001 Thomson Consumer Electronics, Inc. Trademark(s)® Registered Marca(s) Registrada(s) Printed in Japan TOCOM 1571626A Part No.