Manual

¢@nnec i@ns Setup
MENU/DISPLAY Viewfinder
button monitor
Navigation
Buttons
CONTROL dial
MENU/DISPLAY Button
The MENI iI)ISPLAY button is used to turn the
menu screens and on screen indicators on and off'
in the viewfinder and LCD monitor.
Press the MENI iI)ISPLAY button repeatedly to
turn the menus and displays on or off.
CONTROL Dial
The CONTROL dial is used to ad}ust the settings on
the mode and menu screens in the viewfinder and/
or LCI) monitor. ['hese settings can also be adjusted
using the navigation buttons on the LCI) monitor.
The instructions f'or adjusting mode and menu
settings in this manual use the navigation buttons.
To adjust the menu settings with the
CON ['ROL dial, f\)Ilow tile rules below. This
method lets you adjust settings using only the
viewfinder.
1. Rotate the CONTROL dial to highlight the
desired item.
2. Press the CONTROL dial in to select the
highlighted item.
VOL +/- buttons
PHONES jack
Open the jack cover, and
connect stereo earphones
with a 3.5 mm plug to the
PHONES jack.
Using Optional Stereo Earphones
You can ITIonitor the sound using optk)naI stere()
_'arphon_'s during r_'cording or playing back tape's.
Befk)re connecting stereo earphones, turn the
camcorder volume down to the lowest setting.
The built in speaker automatically turns off
when stereo earphones are connected It) the
PHONES jack.
When recording on a tape, you cannot acijust
the volume with the VOL +/- buttons.
10 Chapter "f