Manual

Vie in@ anl @@ nl@alin%
Connecting to a Computer Using an Optional DV Cable
'It) transfbr your videos and still images flint are on the tape to your PC or Macintosh, you
will need an optional I)V cable, a suitably equipped comput_,r with IEEEI394 connection
(also known as Firewire), a DV card, and editing software equipped witt_ your computer
or commercially available software. Some newer computers are already equipped with
this connection.
Minimum Requirements
IEEE1394 Firewire compatible PC in_r_tce, DV card, and editing software
IEEE1394 Fir_'wir_" cabh'
Note: YOucan order an IEEE1394Firewire cable from the accessoriessection (see
page 160).
I_..._ Optional IEEE1394 DV cable
with core filters attached
1. Make sure all units are turned off before making any connections.
2. Connect one end of tile optional DV cable to your camcorder and tile ()tiler end to
tile computer.
3. Press in the Lock button on tile camcorder while setting the Power switch to PLAY
(playback mode). (The POWER indicator comes on.)
4. Turn on the computer, open the application you want to use, and ref('r to tile
software user's guide of tile application /o transfbr the still images or vide<).
5. When finished, close the software, then turn off tile computer and camcorder.
No_s:
Use the power supply instead of the battery pack to power the camcorde_
The date/time information can't be transferred to the compute_
For more information on how to download still images or video to your
computer, refer to your DV card software user's guide
133