Manual

¢@nnec i@ns Setup

Card slot cover

CARD OPEN

button MultiMediaCard

Insert and Remove a Memory Card

This camcorder uses only MultiMediaCards (one

supplied) or SD memory cards (commercially

available) fi)r storage of still images.

Insert a Card

Place" the" POWER switch to the" OFF position.

Hold the camcorder as shozz n, and slide tim

CARD OPEN button to open the card slot cove_

Insert a card into the slot with the label facing up

and the notdled corner facing the lens. Fully

insert the card into the slot.

4. Close the card slot cover.

Remove a Card

1. P_'rform steps 1 and 2 above'.

2. Press the center of the card edge in to release the

card.

3. Pull the card straight out of the slot.

Caution

Do not remove the card from the

camcorder while data is being recorded

on the card This may result in deletion of

images or damage to the card,

SD Memory and MultiMediaCards

SD memo W cards and MultiMediaCards are used for

recording still images with this camcorder. Other

type cards will not work in this camcorder.

These images can then be transf_'rred to a computer

using the supplied readeriwrimr (see page 130).

t,br dt_tails on M_tltiM_dia a_d Sl) cards, st_t_

[)ag_s 144 146

Chapter _ 13