Manual

¢@nnec @ns Setup
Lock
button DSC MODE
switch
Set the DSC MODE (DUAL/TAPE/
CARD) Switch to DUAL
The' cmqnc'order operates as both n \qdeo c'mqncra f_)r
recording on tap_" and a digital cam_,ra for recording
still pictures.
Caution: Do not change the DSC MODE
switch during recording or playback as it may
cause damage to your tape or memory card.
Set the, DSC MODE switch to DUAL to record
both video on tap_, and still pictures on the
MultiMediaCard.
Set the DSC MODE switch to 'IAPE to record
vide() on tape.
Lock
button POWER switch
LCD monitor
EASY/
MANUAL/
AUTO switch
Turn on Camcorder and Set to Full-
Auto Mode
1. Press in the Lock button and set the POWER
switch to the CAMERA position. The camcorder
enters the record stand,by mode.
Note: The camcorder automatically turns off
to save battery power if you leave it in record-
standby mode for more than five minutes. To
turn it back on, set the POWER switch to OFF.
Press in the Lock button and set the POWER
switch to CAMERA.
2. Set the EASY/MANUAL/AUFO switch to AUI'O
to have the camcorder auto_z_atically select the
best settings fk)ryour recording. AU7D appears
in the viewfinder or in the LCI) _:_onitor.
3.
Notes:
Any manual setting is cancelled,
Details about the User Modes using
the EASY/MANUAL/AUTO switch are on
page 35.
S_,t the FOCUS switch to AU['O to have the
camcorder automatically focus for you.
14 Chapte_