Manual

¢@nnec_@ns _ Setup
Powering the Camcorder
YOu can pow_q your camcorder with a batt_q T or th__ AC adapter/charger. The barrel T must
b__ charged as descrihed o_ the _e:ct page b_f\_re it can b__used to power file camcorder.
Attaching the Battery to the
Camcorder
1. Make sure the P()WER switch is set to OFR
UNLOCK
button
2. Pull the viewfinder all the way out and lift it up.
3. Align tile _ mark on the side of the batte W to
the _1 on the camcorder.
4. Press the battery in and slide it down until it
locks into place.
Cautions:
Always stop recording or playback and
place POWER switch in OFF before
attaching or removing the batteo_
Removing the battery while the
camcorder is recording or playing back
may cause damage to the tape or card.
Remove the battery if the camcorder will
not be used for a long period of time.
Use only the recommended batteries for
this camcorde_ Use of other batteries
may present a risk of fire or explosion
Removing the Battery from the
Camcorder
1. Make sure the POWER switch is set to OFR
2.
3.
Pull the viewfinder all the way out and lift it up.
Press and hold the UNLOCK button in the
direction of tile arrow, slide tile battel T up, and
relTtove it.
Chapter _ 19