User’s Guide Changing Entertainment. Again. Find Inside: • Connecting .............. page 4 • Remote Control ......... page 9 • Favorite Channel ...... page 14 • Sleep Timer ................... page 22 • Troubleshooting ..... page 35 Model 13V420T is pictured here. www.rca.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates “dangerous voltage“ inside the product that presents a risk of electric shock or personal injury.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 8. 9. 10. 11. 12. 13. 14. 15. 16. A. B. C. D. Read these instructions. 1. 2. 3. 4. 5. 6. 7. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
Table of Contents Introduction Here are a few of the special features of your new Color Television. Safety/precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Automatic Channel Programming: Quick and easy selection of available stations.
Basic Cable TV Connection The Cable TV signal into your home may be a single cable (75 ohm ) or may include a Cable Box. In either case, the connection to the TV is easy. If your Cable TV signal comes directly via a 75 ohm coaxial cable, using the following steps: Connect the Cable TV signal to the 75 ohm ANTENNA INPUT jack on the rear of the TV. Screw it down tight. Plug the TV’s power cord into a power outlet and turn on the TV. Set TV/CATV to CATV as detailed on page 11.
Basic Antenna Connection A combination antenna receives normal broadcast channels (VHF 2-13 AND UHF 14-69). Your connection is easy since you will connect the antenna to the 75 OHM ANTENNA INPUT jack on the rear of the TV. If your antenna has a round cable (75 ohm) on the end, then you are ready to connect it to the TV. Go to the next step. If your antenna has flat twin-lead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter (not supplied with your TV).
Basic TV to VCR Connection The basic component (VCR, DVD player etc.) to TV connection is described below. For other hookups, refer to your component’s instruction manual. Connect a yellow video cable to the VIDEO jack on the side (front) of the TV and to the VIDEO OUT jack on your VCR (or other component). Connect an audio cable to the AUDIO jack on the side (front) of the TV and to the AUDIO OUT of the VCR (or other device). Match the cable color to the jack color.
Description of Buttons on the TV Front View Your button layout may differ slightly. 5. VOLUME +/- BUTTONS Press to decrease/increase the volume. 1. POWER BUTTON Turns the TV on and off. 6. 2. STANDBY (LED INDICATOR) Lights to show AC power is available. MENU BUTTON Press to display the main menu. 7. 3. SENSOR Receives infra-red signals from the remote. TV/VIDEO (INPUT) BUTTON Choose between TV programming and the AV input. 4. CHANNEL +/- BUTTONS Selects channel numbers.
Remote Control Battery Installation To load batteries into the remote control: Remove the battery compartment lid on the rear of the remote. Press in the tab, then lift off the lid. Place two AA batteries in the remote. Be sure the (+) and (-) ends of the batteries line up correctly (as marked inside the battery compartment). Reattach the battery compartment lid.
Remote Control When operating the remote, point it directly at the front of the TV. Objects between the remote and the remote sensor can block the signal to the TV. CALENDAR Press to display or close the calendar. CAPS Press to toggle the entry mode between uppercase or lowercase letters. Details are on page 33. CHANNEL +/- Buttons Press to select memorized TV channels. In the menu system, acts like the up or down arrow buttons and adjusts menu controls. CC (C.Mute) Press to turn on/off C.
Language You can set the TV’s on-screen menu to English, French or Spanish. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Preferences submenu. Language is highlighted. Press VOL+ or VOL- to select English, Francais (French), or Espanol (Spanish). Preferences Language English CC C.Mute Par.
TV/Cable TV (CATV) It is important for the TV to know what type of signal-Cable TV (CATV) or a normal antenna you are using. Choose your signal (Antenna or Cable): Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Setup submenu. TV/CATV is highlighted. Press VOL+ or VOL- to select TV or CATV. Choose CATV if you have Cable TV service. (See page 4 for connection details.
Auto Search (Setting TV Channels) You can set your TV to receive local TV channels (from an antenna) or Cable TV channels (when you have Cable TV service). Then, use Auto Search to set up channels that are available for you. This makes it easy for you to select only the available TV stations when you press CH+ or CH-. Before you start Auto Search, make the Antenna or Cable TV connection described on pages 4 and 5. In the menu select TV or Cable (CATV) as described on page 11.
Manual Channel Tuning Manual Channel Tuning allows you to search for channels that may have been missed during the Auto Search process. For example, if you are looking for a channel between 60 and 70, start the search at channel 60 and go up. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Setup submenu. TV/CATV is highlighted.
Favorite Channel Setting You can store five channels you prefer into the Favorite List and recall these channels easily by pressing the FAV button on the remote control. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Setup submenu. Press CH+ or CH- repeatedly to highlight Favorite List. Setup Press OK to display the features of Favorite List.
Adding or Erasing Channels You can add or erase channels from the list in the TV’s memory. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Setup. Press OK to enter the Setup submenu. Main Menu Picture Sound Preferences Time Setup TV/CATV is highlighted. Press VOL+ or VOL- to select TV or CATV (whichever you have). Details are on page 11. Press CH+ or CH- repeatedly to highlight Channel.
Picture Adjustments To adjust your TV picture, select a channel and follow the steps below: Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Picture is highlighted. Press OK to enter the Picture submenu. Press CH+ or CH- repeatedly to highlight your choice: Color, Brightness, Contrast, Sharpness, Tint, Blue Back (background), or C.Warmth (color temperature.) Picture Color Brightness Contrast Sharpness Tint Blue Back C.
Preset Picture Mode This function enables you to choose preset video settings for different types of programs and viewing conditions. Most picture settings are preset at the factory to automatically adjust the TV’s Brightness, Color, Contrast and Sharpness. Personal Press PRESETS on the remote control. The current preset picture setting will appear on the screen. Normal Press PRESETS repeatedly to select Personal, Normal, Bright or Theater.
Clock Follow these steps to set the clock. Main Menu Press MENU to see the main menu. Picture Sound Preferences Time Setup Press CH+ or CH- to highlight Time. Press OK to enter the Time submenu. Main Menu Picture Sound Preferences Time Setup Press CH+ or CH- repeatedly to highlight Clock. Press VOL+ or VOL- to change the time in minutes. Press and hold VOL+ or VOLto change the time quickly in 10 minute increments; press OK. The highlight moves to the hour position. Use VOL+ or VOL- to set the hour.
On-Timer To turn on the TV to a specific channel at a specific time, use the On-Timer. Before you begin, set the clock correctly. Details are on page 18. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Time. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Time submenu. Press CH+ or CH- repeatedly to highlight TV/CATV. Press VOL+ or VOL- to select TV or CATV, depending on whether you have Cable TV service or not.
Off-Timer To turn off the TV at a specific time every day, use the Off-Timer. Before you begin, you must set the clock correctly. Details are on page 18. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Time. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Time submenu. Off Time is highlighted. Press VOL+ or VOL- to select Once, Daily or Off. If you select Once, the timer will turn off the TV once.
Closed Caption Closed captioning (CC) lets you read the voice content of TV programs on the TV screen. Designed to help the hearing impaired, on-screen text boxes will show dialog, conversation, and activity during TV programming. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Main Menu Picture Sound Preferences Time Setup Press CH+ or CH- to highlight Preferences. Preferences Press OK to enter the Preferences submenu. Language English CC Off Par.
Sleep Timer The Sleep Timer turns off the TV within an amount of time you specify (10-120 minutes from the current time). Press SLEEP repeatedly to set the sleep timer from 120 to 10 minutes in 10-minute decrements. Sleep: Off Sleep: 120min. After setting the sleep timer, press SLEEP once to display the remaining time. To cancel the sleep timer, press SLEEP until “Off” appears. Within 1 minute of the time set, a clock icon will flash to remind you that the TV will turn itself off soon. Sleep: 110min.
Understanding Parental Lock Parental Lock processes program content advisories from broadcasters. Parental Lock can respond to the content advisories and block objectionable content (offensive language, violence, sexual situations, etc.) This is a great feature to censor the type of programming children watch. Parental Lock offers various blocking options from which to choose: MASTER ENABLE: This is the “master switch” for Parental Lock. When ON, all blocking/censoring you have set is enabled.
Changing Your Password Over the next few pages, you’ll learn how to block programs and understand the rating terms for certain broadcasts. First set your password. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Preference submenu. Preferences Press CH+ or CH- repeatedly to highlight Par. (Parental) Control. Language English CC Off Par. Control Press OK.
Blocking Programming with Movie Ratings There are two types of ratings for Parental Lock. One is based on movie industry ratings. The other is based on TV industry ratings. Both can be used to censor programming. Let first look at the MPAA Rating options of Parental Lock. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Main Menu Picture Sound Preferences Time Setup Press CH+ or CH- to highlight Preferences. Press OK to enter the Preferences submenu.
Blocking Programming with TV Ratings Some program ratings are based on TV industry ratings as described below. MPAA rating TV parental guidelines Block unrated off Block No Rating off Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Master Enable Press OK to enter the Preferences submenu. off MPAA rating TV parental guidelines Block unrated off Block No Rating off Master Enable off Press CH+ or CH- repeatedly to highlight Par. (Parental) Control.
Parental Lock Blocking Options After setting your password, Parental Lock also offers these special blocking options. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Preferences submenu. Press CH+ or CH- to highlight Par. (Parental) Control. Preferences Language English CC Off Par. Control Press OK to display the password screen.
Child Lock Child Lock allows you to lock the buttons on the front of the TV. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Preferences. Main Menu Picture Sound Preferences Time Setup Press OK to enter the Preferences submenu. Press CH+ or CH- repeatedly to highlight FPA (Front Panel) Lock. Preferences Language English CC Off Par. Control FPA Lock Off Press VOL+ or VOL- to turn on or off FPA Lock.
Sound Mode Selection Models 24V412T and 24V511T: This feature is available with these models only. You can preset sound mode that best suits your current programming among Personal, Theater, Concert and Speech. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Sound. Sound Volume 50 Bass 50 Treble 50 Balance ±00 Surround Off Sound Mode Speech Press OK to enter the Sound submenu. Press CH+ or CH- repeatedly to highlight Sound Mode.
Sound Adjustments Models 24V412T and 24V511T: This feature is available with these models only. You can adjust the low frequency (Bass) or high frequency (Treble). You can also adjust the Balance to increase the volume of the left and right sound channels. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Sound. Sound Volume 50 Bass 50 Treble 50 Balance ±00 Surround Off Sound Mode Speech Press OK to enter the Sound submenu.
Surround Models 24V412T and 24V511T: This feature is available with these models only. When stereo signals are available, this function enhances the stereo spatial effect. Main Menu Picture Sound Preferences Time Setup Press MENU to see the main menu. Press CH+ or CH- to highlight Sound. Press OK to enter the Sound submenu. Press CH+ or CH- repeatedly to highlight Surround.
Stereo and Second Audio Program Models 24V412T and 24V511T: This feature is available with these models only. Multi-channel Sound (MTS) broadcasts enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program (SAP), which broadcasters can use to transmit a second language or for other purposes. CATV 6 MONO OR CATV 22 MONO STEREO SAP Press MTS on the remote control to select STEREO, MONO, or SAP.
Notebook This feature enables you to store personal messages and can be used as a reminder. Press NOTEPAD to display the notebook screen. Press CAPS repeatedly to toggle the entry mode between uppercase or lowercase letters. Use number buttons to enter letters, numbers, or some special symbols. Press DEL(ETE) to delete the unwanted text. Press INS(ERT) to select INS(ERT) or OVR(overwrite) on the screen, then use number buttons to insert or overwrite the letter or number in the text.
Calendar Calendar enables you to look up the date easily. Press CALENDAR to display the calendar. Press VOL+ or VOL- to display a previous or future month, e.g. MAY. Press CH+ or CH- to to display a previous or future year, e.g. 2004. Press MENU repeatedly to exit the menu or the menu will automatically disappear within a few seconds if no buttons are pressed on the remote control.
Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. Note for U.S. customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your vice, call 1-888-206-3359. For additional assistance while using your RCA product, please visit www.rca.com/customersupport. TV Problems TV won’t turn on • Make sure the TV is plugged in.
Care and Cleaning CAUTION: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder.
• Damage from misuse or neglect. • Batteries. • Customer replacement fuses. • Damage from images burnt onto the screen. • Special, incidental or consequential damages. • A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes. • A television purchased or serviced outside the U.S.A. • Acts of nature, such as but not limited to lightning damage.
This page intentionally left blank.
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.