Television User’s Guide Changing Entertainment. Again. Please read this manual before operating this product for the first time.
Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury.
Introduction Key Features Overview Your TV is equipped with features that will add to your TV viewing experience. The following information summarizes a few of these features. Chapter 3 provides more information about the rest of the TV’s features and how to use them. On-screen Program Guide Description: The GUIDE Plus+™ system is an on-screen interactive list of programs and information that is built into your TV.
Introduction Auto Tuning CHANNEL 1 2 3 4 0 Description: Allows you to set up the TV to automatically tune to a specific channel when you press a certain component (VCR, DVD player, etc.) button on the remote. Signal Type Auto Channel Search List and Labels Auto Tuning Exit Requirements: Set up Auto Tuning in the TV’s menu system. (Chapter 3 has details).
Table of Contents Introduction Key Features Overview .................................................................................................... 1 On-screen Program Guide ......................................................................................... 1 V-Chip: Parental Controls ........................................................................................... 1 Auto Tuning ............................................................................................................
Table of Contents Chapter 3: Using the TV’s Features About the GUIDE Plus+ System ..................................................................................... 28 Downloading Data ................................................................................................... 28 Getting In & Out of the GUIDE Plus+ System ......................................................... 29 The GUIDE Plus+ System Menus ..............................................................................
Chapter 1 Connections & Setup Chapter Overview: • Things to Consider Before You Connect • Choose Your Connection • Connections • Using the VPORT Jack • Jacks on the Back of the TV • Why You Should Connect This G-LINK Cable • Plug in the TV • Put Batteries in the Remote • How to Use the Remote Control to Complete the Interactive Setup • Turn on the TV • Complete the Interactive Setup Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all components before you plug any of their power cords into the wall outlet. • Turn off the TV and/or component before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with your TV. Protect Components from Overheating • Don’t block ventilation holes on any of the components.
Connections & Setup Choose Your Connection There are several ways to connect your TV. Please use the following chart to determine which connection is best for you. Proceed to the appropriate page and connect your TV. Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359.
Connections & Setup VCR VIDEO AUDIO IN FROM ANT CH3 CH4 OUT VCR R L R L OUT TO TV IN 3 From Cable or Antenna TV (back panel) TV Y R-AUDIO-L PB PR INPUT1 VIDEO VPORT AUDIO OUT 4 R-AUDIO-L R 1B DVD CABLE/ ANTENNA 1A L S-VIDEO G-LINK 2 INPUT2 VIDEO 1D 1C* OUT D VD Y Pr Pb VIDEO R L S-VIDEO * If you connect an S-Video cable, you must connect the audio cables to the INPUT1 AUDIO R and L jacks on the back of the TV, not the INPUT2 AUDIO jacks.
Connections & Setup TV + VCR + DVD Player 1. Connect your TV to your DVD player A. Connect the audio cables (white and red) to the INPUT2 AUDIO R and L jacks on the back of the TV and to the Audio Output Jacks on the DVD player. B. If your DVD player has Component Output Jacks (Y, PB, PR), connect three video grade cables to the Y, PB, PR jacks on the DVD player and to the Y, PB, PR jacks on the back of the TV. If your DVD player doesn’t have Y, PB, PR jacks, go to C. -ORC.
Connections & Setup TV (back panel) R-AUDIO-L PB Y INPUT2 VIDEO PR INPUT1 TV VIDEO VPORT AUDIO OUT R 1B G-LINK 3 VCR CABLE/ ANTENNA R-AUDIO-L 1A L S-VIDEO 1C VIDEO AUDIO IN FROM ANT OUT VCR R L R L IN OUT TO TV CH3 CH4 2 From Cable or Antenna TV + VCR 1. Connect your TV to your VCR A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV). B. Connect the audio/video cables.
Connections & Setup Xbox TV (back panel) Y Pb Pr R G-LINK OR L S-VIDEO R OUT L CABLE/ ANTENNA R-AUDIO-L VIDEO AUDIO OUT 2 INPUT2 DVD Pb Pr Y VPORT INPUT1 R-AUDIO-L VIDEO From Cable, Cable Box, or Antenna 1 Using the VPORT Jack The VPORT jack lets you connect an Xbox video game console to the TV using an Xbox to VPORT cable (not provided). Go to the Accessory Order Form on page 59 to purchase the Xbox to VPORT cable.
Connections & Setup Jacks on the Back of the TV This section describes each of the jacks on the back of the TV. When connecting A/V cables, be sure to connect corresponding outputs to inputs (video to video, right audio to right audio, etc.) VPORT Go to page 11 for VPORT explanation. G-LINK Connect the end of the G-LINK cable (provided) to this jack. The G-LINK cable enables the TV’s GUIDE Plus+ system to interact with the cable box and/or the VCR. A picture of the G-LINK cable is on page 7.
Connections & Setup Why You Should Connect This G-LINK Cable The G-LINK cable enables the GUIDE Plus+ system (the on-screen interactive program guide) to work with your VCR and/or cable box. Cable Box – If your TV is connected to a cable box you must connect the G-LINK cable to receive TV program listings for your area, and to tune directly to a channel when the program guide is on your TV screen.
Connections & Setup Plug in the TV Plug the end of the power cord into the wall outlet. Match the wide blade of the plug with the wide slot in the outlet. Insert the plug completely into the outlet. Put Batteries in the Remote 1. Remove the battery compartment cover on the remote. 2. Insert new batteries. Match the polarities (+ and -) on the batteries with the diagram on the remote. 3. Put the battery compartment cover back on the remote.
Connections & Setup Complete the Interactive Setup Tip To access the setup menus manually, press MENU and choose Setup. SETUP Select the language to be used in these menus. 1 English 2 Español 3 Français SETUP Would you like the TV to search for all available channels? 1 Search for channels 2 Skip this step The menu system in your TV allows the TV’s features to work properly. We call it the “interactive setup” because the TV asks you questions, you answer, and the TV makes the appropriate adjustments.
Connections & Setup Step 1: Identifying Your TV’s Location 1. If your country is highlighted, press OK on the remote control. If your country isn’t highlighted, press the up or down arrow button on the remote control to highlight your country and press OK. 2. Use the number buttons on your remote to enter your zip code. Press OK when you’re finished.
Connections & Setup 3. Highlight the channel to which you have to tune your TV in order to see cable programming, and press OK (a screen appears reminding you to connect your G-LINK cable to your TV and cable box). Notes: Channel 03 is the most common. Choose Video1/AUX if your cable box is connected to your TV with audio/video cables instead of a coaxial cable. Go to page 7 for pictures of these cables. 4. Highlight your brand of cable box, and press OK.
Connections & Setup Step 3: Configuring for a VCR 1. If your TV is connected to a VCR, press OK (a screen appears reminding you to connect your G-LINK cable to your TV and VCR). If it is not, highlight No and press OK. 2. Use the up and down arrow buttons to highlight the brand of your VCR that is connected to the TV and press OK. If your brand isn’t listed, highlight Not Listed and press OK. 3. Tune your VCR to channel 02. Next, turn OFF your VCR.
Connections & Setup Tip Note: If the GUIDE Plus+ system can’t locate the correct code for the VCR, a list of troubleshooting instructions appears to help you before you try again. Leave your cable box turned ON to download program information. • Try VCR configuration again: repeat VCR setup. • Test alternate codes: tests selected brands and if this fails, the test continues with all codes in the system.
Connections & Setup What to Expect The next time you turn on your TV, the GUIDE Plus+ system will appear on the screen. The following examples explain what you might see: • • • If all of the program information has been sent to your TV, the GUIDE Plus+ system appears with all of your TV program listings. If the program information hasn’t been sent to your TV yet, an outline of the Guide (without TV program listings) will appear on the screen. Program information is usually sent to your TV at night.
Chapter 2 Using the Remote Control Chapter Overview: • The Buttons on the Remote Control • Programming the Remote to Operate Other Components • How To Use the Remote After You’ve Programmed It • Code List Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the Remote Control The Buttons on the Remote Control L.E.D. 0-9 (Number buttons) Enter channel numbers and time settings directly through the remote control. ON OFF VCR DVD VPORT TV AUX SAT CABLE MUTE To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit for two seconds until two dashes appear to the right of the number, then add the second two. Example: to tune to channel 123, press and hold 1 for two seconds, press 2, then press 3.
Using the Remote Control Tip To turn off all the RCA, GE, and Proscan components that are connected to the TV, press ON•OFF twice within two seconds. This feature only works with most RCA, GE and Proscan products. PAUSE If you’re operating a VCR or DVD player with the remote control, press PAUSE when the videotape or disc is playing to pause playback. PLAY If you’re operating a VCR or DVD player, plays the videotape or disc.
Using the Remote Control DVD Programming the Remote to Operate Other Components ON OFF VCR VPORT AUX SAT CABLE VOL VOL CH + The universal remote control can be programmed to operate most brands of remote controllable VCRs, DVD players, audio receivers, satellite receivers and cable boxes. The remote is already programmed to operate most RCA, GE and Proscan VCRs, DVD players, audio receivers and satellite receivers. Note: The TV button cannot be programmed.
Using the Remote Control Using Direct Entry 1. Turn on the component you want the remote to operate. 2. Look up the brand and code number(s) for the component on the code list at the bottom of the page or on page 26. 3. Press and hold the component button that corresponds to the component you want the remote to operate (VCR, etc.) 4. Enter the code from the code list. 5. Release the component button. 6. Press ON•OFF to see if the component responds to the remote commands.
Using the Remote Control VCR Codes Programmable for VCR, VPORT and AUX buttons. Admiral ......................................................................... 2132 Adventura ..................................................................... 2026 Aiko .............................................................................. 2027 Aiwa .............................................................................. 2026 Akai ...................................... 2003, 2004, 2005, 2007, 2008, ........
Chapter 3 Using the TV’s Features Chapter Overview: • About the GUIDE Plus+ System • The Channel Banner • Auto Tuning • Parental Controls and V-Chip Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the TV’s Features Action Program Video Menu window buttons information options About the GUIDE Plus+ System The GUIDE Plus+ system is an interactive on-screen program guide that lists TV schedules for your area and allows your TV direct control of a cable box and/or VCR. You must first set up the GUIDE Plus+ Menu system in order to view this on-screen program guide (see Chapter 1 for details). Press GUIDE to bring up the GUIDE Plus+ system.
Using the TV’s Features Getting In & Out of the GUIDE Plus+ System ON OFF VCR DVD VPORT TV AUX SAT CABLE MUTE SKIP GUIDE VOL VOL CH + • Press GUIDE on the remote. • Press and hold MENU for 2 seconds on the front panel. To exit the GUIDE Plus+ system: CH SOUND GO BACK GUIDE INFO • Highlight a program and press OK to exit the GUIDE Plus+ system and tune to the channel. • Press GUIDE to exit the GUIDE Plus+ system and tune to the channel displayed in the video window.
Using the TV’s Features Grid guide menu selection Grid guide action buttons Grid Guide Action Buttons Action buttons will change according to where you are in the GUIDE Plus+ system. Be sure to look at the action bar before pressing the command numbers. When highlighting the program, the following Action buttons appear: • Watch Press 1 on the remote to place a timer in the Schedule for the TV to turn on and tune to the program highlighted in the channel listing.
Using the TV’s Features Sort menu selection Sort The Sort menu lets you browse programs by category. The channel to which you are currently tuned is displayed in the video window. To Sort: 1. If the GUIDE Plus+ system isn’t on your screen, press GUIDE on your remote control. 2. Press MENU on the remote to select the Menu bar. 3. Use the arrows to highlight Sort. When Sort is highlighted for the first time, the Movies category is displayed. Thereafter, the last category used becomes the default.
Using the TV’s Features News menu selection News The News menu lets you browse current news stories by headline. Schedule menu action buttons Schedule menu selection 1. If the GUIDE Plus+ system isn’t on your screen, press GUIDE on your remote control. 2. Press MENU on the remote control to select the menu bar. 3. Use the arrows to highlight News (if MSNBC is available on your TV, it will appear in the video window). 4. Use the up and down arrows to highlight a story.
Using the TV’s Features To remove or change the frequency (daily, once, or weekly) of a scheduled event, access the Schedule menu from the Menu bar. 1. 2. 3. 4. Press GUIDE to bring up the GUIDE Plus+ system. Press MENU on the remote to select the Menu bar. Use the arrows to highlight the Schedule menu selection. Use the up and down arrows to highlight the program you want to edit. Then use the Schedule Menu Action Buttons as described next.
Using the TV’s Features Channels menu action buttons Channels menu selection Channels You can customize the channel listing by enabling or disabling the display of certain channels. For instance, you may disable channels that you never watch. You can restore disabled channels at a later point in time. 1. If the GUIDE Plus+ system isn’t on your screen, press GUIDE on your remote control. 2. Press MENU to select the Menu bar. 3. Use the right and left arrows to highlight the Channels menu selection.
Using the TV’s Features How to Get More Information About an Advertisement or a Program To find out more information about a program, advertisement or special, use the left arrow button to highlight the channel listing or promotional information box. Requesting more information about a particular show displays the PlusCode programming number and the Shows on Next for that channel. Press the INFO button to exit the expanded information screen.
Using the TV’s Features 12:01 ESPN SAP 60 Channel Banner There are several indicators that might appear when you press the TV or INFO buttons on the remote. This display is called the Channel Banner. The following list describes the items on the Channel Banner screen (left to right and top to bottom). 00:00 12:01 Displays the current time. The lock is displayed to indicate when the Parental Controls are locked or unlocked. Sample displays on a Channel Banner.
Using the TV’s Features 1 2 3 4 5 6 7 8 0 TV MAIN MENU 1. Press MENU (the TV MAIN MENU appears). Audio Picture Quality Screen Channel Time CHANNEL Parental Controls GUIDE Plus+ Menu 1 Signal Type Setup 2 Auto Channel Search Exit 3 List and Labels 2. Highlight Channel and press OK on your remote control. 3. Highlight Auto Tuning and press OK. 4.
Using the TV’s Features 1 2 3 4 5 6 7 8 0 TV MAIN MENU Audio Picture Quality Screen Channel Time Parental Controls GUIDEPARENTAL Plus+ Menu CONTROLS Setup Exit1 V-Chip TV Rating Limit 2 V-Chip Movie Rating Limit 3 V-Chip Unrated Program Block 4 Channel Block 5 Front Panel Block 6 Lock Parental Controls 0 Exit Parental Controls and V-Chip The Parental Controls menu allows you to program your TV so that children cannot see certain programs, channels, or use the front panel controls.
Using the TV’s Features Age-Based Rating TV-MA TV-14 1 2 3 4 5 6 7 8 0 Description and Content Themes for Age-Based Ratings Mature Audience Only. Specifically designed to be viewed by adults and may be unsuitable for children under 17. It contains one or more of the following content themes: crude indecent language (L), explicit sexual activity (S), or graphic violence (V). Parents Strongly Cautioned. Contains some material that many parents would find unsuitable for children under 14.
Using the TV’s Features The V-Chip Rating Limit Screen The following is an example of where items are located within the Rating Limit screen. Rating Status Field Lets you select whether the status of the age-based rating limit to the left is View or Block. Content Themes V-CHIP TV RATING LIMIT - - Content - - Rating TV-MA Rating Field Lets you select from a list of age-based ratings you can block or view. Status VIEW D L S V FV V V V ^ Press ^/v to select rating. Press MENU to exit.
Using the TV’s Features Hierarchy of Age-Based Ratings TV-MA Mature Audience Only TV-14 Parents Strongly Cautioned TV-PG Parental Guidance Suggested TV-G General Audience TV-Y7 Directed to Children 7 years and older TV-Y All Children Rating field Rating status field Content status fields V-CHIP TV RATING LIMIT - - Content - - Rating TV-14 Status View D L S V FV V V V V ^ Press ^/v to block programs with this rating. Press MENU to exit.
Using the TV’s Features Rating field Rating status field Content themes V-CHIP TV RATING LIMIT - - Content - - Rating TV-PG Status View D L S V FV V B V V ^ Press ^/v to view programs with this content for this rating. D L S V FV RATING STATUS B V V TV-MA View V B V V TV-14 View V B V V TV-PG View TV-G View V TV-Y7 View TV-Y View Content status fields To block program content: 1. Determine the lowest level of content you don’t want the child to watch. 2.
Using the TV’s Features V-Chip Movie Rating Limit PARENTAL CONTROLS 1 V-Chip TV Rating Limit 2 V-Chip Movie Rating Limit 3 V-Chip UnratedMOVIE ProgramRATING Block V-CHIP LIMIT 4 Channel Block Rating Status 5 Front Panel Block PG-13 Block ^ 6 Lock Parental Press ^/vControls to view programs with 0 Exit this rating. Press MENU to exit.
Using the TV’s Features Rating status field Rating field V-CHIP MOVIE RATING LIMIT Rating NC-17 Status View ^ Press ^/v to block programs with this rating. Press MENU to exit. RATING NR X NC-17 R PG-13 PG G STATUS Block Block View Block Block View View Viewing Movie Ratings After you block movie ratings, you have the option of changing some of the rating status buttons back to View: 1. Highlight the Rating field and press the up and down arrow buttons to find the rating you want to view. 2.
Using the TV’s Features PARENTAL CONTROLS 1 V-Chip TV Rating Limit 2 V-Chip Movie Rating Limit 3 V-Chip Unrated Program Block 4 Channel Block 5 Front Panel Block 6 Lock Parental Controls FRONT PANEL BLOCK 0 Exit 1 Unblock 2 Block Front Panel Block Selecting this option lets you block (disable) or unblock (enable) the TV’s front panel. The remote still tunes to any channel. Front Panel Block can: • Keep children from watching TV when the parent is not present.
(This page intentionally left blank)
Chapter 4 Using the TV’s Menu System Chapter Overview: • How to Use Your TV’s Menu System • Audio Menu • Picture Quality Menu • Screen Menu • Using Closed Captioning • Channel Menu • Time Menu Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Using the TV’s Menu System How to Use Your TV’s Menu System You use the buttons on the remote or the front of your TV to access the menu system and make changes to the settings. The following pages explain how to use the different types of menus to adjust the features of your TV. TV MAIN MENU 1 2 3 4 5 6 7 8 0 Audio Picture Quality Screen Channel Time Parental Controls GUIDE Plus+ Menu Setup Exit Menus The first menu is called the Main menu.
Using the TV’s Menu System Expanded Stereo Electronically “widens” sound from stereo broadcasts, stereo VCRs, digital satellite systems, DVD players, and laserdisc players for a fuller, more spacious sound. Sound Logic™ Stereo Reduces the annoying blasts in volume during commercial breaks, and also amplifies softer sounds in program material. Eliminates the need to constantly adjust volume control. Second Audio Program (SAP) Plays the program’s audio in a second language, if one is available.
Using the TV’s Menu System Picture Presets Displays a choice list that lets you select one of three preset picture settings: Bright Lighting, Normal Lighting, Soft Lighting or Personal Picture Preset. Choose the setting that is best for your viewing environment. Auto Color Displays a choice list that lets you turn on the feature that automatically corrects the color of the picture. (This is especially useful for tracking realistic flesh tone colors as you switch from channel to channel.
Using the TV’s Menu System Using Closed Captioning Many programs are encoded with closed-captioning information, which lets you display the audio portion of a program as text on the TV screen. Closed captioning is not available on all channels at all times. Only specific programs encoded with closed-captioning information are applicable. When a program is closed captioned, the CC icon is displayed in the channel banner. See Chapter 3 for more information about the channel banner.
Using the TV’s Menu System TV MAIN MENU 1 2 3 4 5 6 7 8 0 Audio Picture Quality Screen Channel Time Parental ControlsCHANNEL GUIDE Plus+ Menu 1 Signal Type Setup 2 Auto Channel Search Exit 3 List and Labels 4 Auto Tuning 0 Exit Channel Menu Signal Type Displays a choice list that lets you select the current antenna type. This option does not appear when the GUIDE Plus+ system is set up. UHF/VHF Antenna Choose this if you are currently using an off-air antenna for TV signals.
Chapter 5 Other Information Chapter Overview: • Troubleshooting • Care and Cleaning • The Front of Your TV • Limited Warranty • Accessory Order Form • Index Changing Entertainment. Again. Graphics contained within this publication are for representation only.
Other Information Troubleshooting Most problems you encounter with your TV you can correct by consulting the Troubleshooting list that follows. Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. TV Problems TV won’t turn on • • • • • Press the TV button. Make sure the TV is plugged in.
Other Information Troubleshooting No picture, no sound but TV is on • Maybe the cable/air setting is set to the wrong position. Select Signal Type from the Channel menu. Go to page 52 for more information. • • The channel might be empty — change channels. If you’re watching your VCR and it’s connected with coaxial cable to the CABLE/ANTENNA jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR).
Other Information The Remote Control Doesn’t Work • • • • • Something might be between the remote and the remote sensor on the component. Make sure there is a clear path. Maybe the remote isn’t aimed directly at the component (TV or VCR) that you’re trying to operate. Maybe remote is not in TV Mode. Press the TV button so remote will control TV. Maybe batteries in remote are weak, dead or installed incorrectly. Put new batteries in the remote.
Other Information The Front of Your TV Front Panel If you can’t find your remote control you can use the buttons on your TV to operate many of the TV’s features. MENU Brings up the TV MAIN MENU. When in the menu system, it selects highlighted items. Also returns you to the previous menu. Press and hold MENU for two seconds to access the GUIDE Plus+ system. ^ CH Scans down through the current channel list. When you’re using the TV’s menu system, it acts like the arrow down button on the remote control.
Other Information How you get service: • For screen sizes of 26” and smaller: Take your RCA television to any Authorized RCA Television Service Center and pick up when repairs are complete. • For screen sizes larger than 26": Request home or pick up, repair, and return service from any Authorized RCA Television Service Center, provided that your television is located within the geographic territory covered by an Authorized RCA Television Service Center.
Other Information VH82 (6-ft) Screw-on Cable attaches to the round antenna connectors (called 75-ohm F-type) on the back of your VCR or TV. The ends screw onto the connectors for a secure connection. VH89 (6-ft) Push-on Cable attaches to the round antenna connectors (called 75-ohm F-type) on the back of your VCR or TV. Ends push on for a quick connection.
Other Information S-Video Cable has multipin connectors on each end for connecting S-Video components to your TV. Charge your order on your VISA, MasterCard, or Discover Card by filling in below USE YOUR CREDIT CARD VH976 (6-ft) ® IMPORTANT: Copy complete account number from your VISA card VH913 (12-ft) 2-way Signal Splitter Helps you connect a second TV or VCR.
Index A Labels 52 J Lineup 28 Accessories 59 Menu 52 Jacks, 12 Advanced connections 9 AUDIO OUT R/L 12 Search 15 Age-Based Ratings 39 AUDIO R/L 12 Channels menu 34 ANTENNA button 22 CABLE/ANTENNA 12 CLEAR button 22 Arrow buttons 22 Front panel 57 Closed Caption Audio G-LINK 12 Display 50 code list 26 INPUT1 12 Mode 51 Menu 48 INPUT2 12 Coaxial cable 7 Out jacks 12 S-VIDEO 12 Code list Output Volume & Speakers VIDEO 12 Audio 26 49 VPORT 12 Cable Box 25 Processor 48 Y PB PR 12 DVD 26 Audio/Video Satellite Re
Visit the RCA web site at www.rca.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. IMPORTER: (for Mexico only) Comercializadora Thomson de México, S.A. de C.V. Miguel de Cervantes Saavedra 57 Col. Ampliación Granada C.P. 11529 México D.F. Telefono: (55) 25 81 53 20 R.F.C. CTM-980723 KS5 EXPORTER: Thomson multimedia Inc.