Owner's Manual
This unit can display picture files recorded on CD-R and CD-RW discs.
Playing a Picture File Disc
1. Open the disc door.
2. Place a picture file disc onto the tray with label side up.
3. Close the disc door.
4. The unit will load the disc and automatically display
the contents of the disc on the screen, while playing the
beginning of the first picture file. These files will then be
played back one by one. If the unit does not automatically
start playing, press the
PLAY button.
5. Press
STOP or RETURN button to enter the contents of
the disc. Then press the
, , or CURSOR button
to select a picture that you want to view, and press the OK
button to confirm.
6. Now the picture slideshow begins with the selected picture.
Notes:
PAUSE button to interrupt playback, and press the PLAY button to resume
playback.
GOTO function or use the numbered buttons to enter the number of a picture file
to quickly select the image.
ZOOM button to enlarge the picture in 3 levels (2, 3 and 4 times) only
while HDMI resolution is set to 480p.
to rotate picture anti-clockwise by 90°, press to rotate picture clockwise
by 90°; press
to flip picture vertically, press to flip picture horizontally.
to PCM.
HDMI button on the remote control in
stop mode to change output signals as below:
480p (progressive)
720p (progressive)
1080i (interlace)
1080p (progressive)
Notes:
TV as well.
be sure to turn off the power and unplug both
units from the wall outlet before making any
connections.
monitor or display, you can connect it to this
player using a HDMI cable.
Slow-motion Play
1. Press the SLOW button on the remote in play
mode.
SLOW button is pressed, the
speed of slow-motion playback changes in
the following sequence:
SF 1/2 SF 1/4 SF 1/8 PLAY
2. Press the
PLAY button to return to normal
playback speed.
Note: To return to normal playback speed, you
can also press SLOW button repeatedly until
PLAY displays on the screen.
Audio Selection
On some DVDs, the sound is recorded in two
or more formats. Follow the directions below
to select the preferred language and sound
system.
1. While a disc is playing, press the AUDIO
button to show the current audio format
number. e.g.
2. Press the AUDIO button repeatedly to select
the desired audio format.
Notes:
DVD, the number does not change.
selections only via the disc menu. If this is the
case, press the MENU button and choose the
appropriate language on the disc menu.
AUDIO button repeatedly.
Subtitle Selection
1. While a DVD is playing, press the SUBTITLE
button to display the current language
setting, as shown in the example.
[1 ENGLISH ]
2. Press the SUBTITLE button repeatedly
to select the desired subtitle language.
SUBTITLE button repeatedly until the
[ OFF ]
is
displayed.
Notes:
automatically, and you cannot turn them off
even if you set the subtitle function to off.
appear immediately after you select your
desired scene.
differs depending on the disc. If only one
language is recorded, the language does not
change.
on which subtitles have been recorded in
multiple languages.
only via the disc menu. If this is the case,
press the MENU button and choose the
appropriate subtitle on the disc menu.
Angle Selection
Some DVDs contain scenes which have been
shot from a number of different angles. For these
discs, the same scene can be viewed from each
of these different angles.
1. While you are playing a DVD with different
angles recorded, press the ANGLE button to
view the number of current angles available.
2. Press the ANGLE button repeatedly to
change the scene to the next recorded angle.
e.g.
continue from the new angle you selected.
playback continues without changing the
current angle.
Notes:
which scenes shot from multiple angles have
been recorded.
is
displayed.
Display Function
While the disc is playing, press the DISPLAY
button on the remote control repeatedly to
display information on operation status.
Elapsed Time:
of the chapter/title which is currently playing.
Remaining Time: Remaining time of the
chapter/title which is currently playing.
-
T
C
-
T
02:01:22
00:30:15
00:12:03
Chapter Remaining Time
Title Remaining Time
Playing a Disc
1. Press the STANDBY / ON button to turn
on the unit.
See CUSTOMIZING THE FUNCTION
SETTINGS before proceeding to step 2.
2. Press the
OPEN/CLOSE button to open
the disc tray.
3. Place a disc onto the disc tray with the label
side up.
4. Press the
OPEN/CLOSE button to close
the disc tray. It takes a short while for your unit
the unit will automatically take you main menu
or start playing.
5. If the unit does not automatically start playing
the DVD, press the
PLAY button.
Pausing Playback (Still Mode)
Press the PAUSE button on the remote. To
resume normal playback, press the
PLAY
button.
Frame Advance
STEP button, the
picture advances one frame.
2. Press PLAY to resume normal playback.
Stopping Playback
STOP button at the location
where you want to interrupt playback. To
resume playback at the position where
the disc was stopped, press the
PLAY
button.
STOP button twice, the
the
PLAY button will reset the disc to the
beginning.
Zooming into an image
While a disc is playing, press the ZOOM button
to enlarge the image in several levels.
ZOOM 2
ZOOM 3 ZOOM 4
ZOOM: OFF
, , or CURSOR button to shift the
view and display the part you want.
ZOOM
button until the
ZOOM: OFF shows. The
screen will return to normal.
display will not shift anymore in that direction.
Skipping (Forward / Reverse)
PREV button to go back to
current or previous chapters/tracks.
NEXT button to advance
chapters/tracks.
the remote control to jump immediately to the
desired track number.
Fast Forward / Fast Reverse
1. Press the SEARCH or SEARCH
you press the SEARCH
or SEARCH
button, the playback speed changes in the
following sequence:
FORWARD x 2
FORWARD x 8
FORWARD x 30 FORWARD x 100
PLAY
BACKWARD x 2 BACKWARD x 8
BACKWARD x 30 BACKWARD x 100
PLAY
2. Press the PLAY button when you reach
the desired point to resume normal playback.
Notes:
reverse and forward scan of DVDs.
on the disc.
o return to normal playback speed, you can
also press the
or button repeatedly
until PLAY displays on the screen.
Playing Titles/Chapters/Tracks in a Favorite Order
1. Press the MEMORY button and the following display appears.
2. Select the items in the order you want by pressing the number
, , , ),
the space is highlighted. Highlight where you want to enter, then
press the corresponding number buttons.
3. Press the Cursor buttons (
, , , ) to move the highlighted
OK button. The DVD player starts
memory playback.
4. To resume normal playback from memory playback
a) Press the MEMORY button.
b) Press the Cursor buttons (
, , , ) to move the highlighted
OK button to clear all the input
STOP button to
clear all the input programs.
c) Press the
PLAY button to resume normal playback.
Notes:
by the disc, after you press the OK button, it will restore to
(title, chapter) or
(track).
numbers.
playback.
MEMORY button while the display appears on the TV screen, the display
disappears.
player.
Locating a Specific Chapter / Track / Title / Time
If you know the chapter / track / title / time number you want to play, you can locate a specific chapter
/ track / title / time by directly selecting a chapter / track / title / time number.
1. Press the GOTO button to search your desired chapter / track / title / time.
2. Press
, , or button to highlight a chapter / track / title / time and press the corresponding
number button(s) for the chapter / track / title / time you want.
3. Press the OK button to confirm. The unit will start playback about 3 seconds later.
Notes :
disc.
repeat)
Repeating a chapter
1. While the disc is playing, press the REPEAT
DISC button until the
REPEAT: [CHAPTER]
indicator displays
on the screen. The current chapter is played
repeatedly.
Repeating a title
2. While the disc is playing, press
the REPEAT DISC button until the
REPEAT: [TITLE]
indicator displays
on the screen. The current title is played
repeatedly.
Repeating a whole disc
3. While the disc is playing, press
the REPEAT DISC button until the
REPEAT: [ALL REPEAT]
indicator
displays on the screen. The whole disc is
played repeatedly.
To resume normal playback
4. While the disc is playing, press
the REPEAT DISC button until the
REPEAT: [OFF]
indicator displays on
the screen.
repeatedly.
Repeating a single track
1. While the disc is playing, press
the REPEAT DISC button until the
REPEAT: [REP 1]
indicator displays
on the screen. The current track is played
repeatedly.
Repeating a whole disc
2. While the disc is playing, press
the REPEAT DISC button until the
REPEAT: [ALL REPEAT]
indicator
displays on the screen. The whole disc is
played repeatedly.
To resume normal playback
3. Press the REPEAT DISC button until the
REPEAT: [OFF]
indicator displays on
the screen.
Repeating a specific section
1. While the disc is playing, press the REPEAT
A-B button at the beginning of the section (
REPEAT A-
is displayed) you want to play
repeatedly.
2. Press the REPEAT A-B button again at
the end of the section (
REPEAT A-B
is
displayed).
3. The unit will immediately begin replaying your
selection.
To resume normal playback
4. While the disc is playing, press the REPEAT
A-B button until the
REPEAT A-B OFF
indicator displays on the screen.
Notes:
operation.
title. If the start and end of the section to be
cancelled.
current title or track.
scenes where different camera angles are
recorded.
PLAYING A DISC
This user manual explains the basic instructions
for operating this unit. Some DVDs are produced
in a manner that allows specific or limited
operation during playback. Therefore, this unit
may not respond to all operating commands.
instructions accompanying the specific DVD in
question for more information about the options
available on that DVD.
may appear on the screen during operation.
It means that the desired operation is not
permitted by the unit or disc.
PLAYING PICTURE FILE DISC
PRoGRAmmAbLE mEmoRY
REPEAT PLAYbACK
LoCATING A DESIRED SECTIoN
CUSTomIZING THE FUNCTIoN SETTINGS
Sequence of angle shots (Example)
: [
2 /
3
]
B. CONNECTING TO A DISPLAY (Using a
HDMI cable)
For TVs that support it, HDMI can provide the
best quality audio and video output (depending on
media source), and so is the preferred connection
type. The HDMI cable incorporates both audio
and video signals, so you will have just one cable
running from the unit to your TV. Using a HDMI
cable (not included), connect the HDMI OUT jack
on your unit to the HDMI IN jack on your TV or
HDMI-compatible display.
other analog video outputs.
input signal.
CONNECTING TO OPTIONAL EQUIPMENT (AMPLIFIER)
A. ANALOG CONNECTION
Using an audio/video cable, connect the left/right
jack on your other source.
B. DIGITAL CONNECTIONS (preferred)
This unit has two digital audio outputs – a
being played contains multi-channel content.
Simply connect a coaxial (not included) or optical
(not included) cable from the coaxial or optical
output of your unit to the coaxial or optical input
Notes:
equipment from the wall outlet before making any connections.
interference if the tuner function is selected while the television is working.
HDMI Resolution
1. Press the SETUP button.
2. Press the
/ button to select HDMI
3. Press the OK button, then the
/ button to
select the options (480p, 720p, 1080i or 1080p).
4. Press the OK button.
5. Press the SETUP or RETURN button to exit
the menu.
Note: Select the resolution according to the
performance of the connected TV.
TV Shape
1. Press the SETUP button.
2. Press the
/
3. Press the OK button, then the
/ button
4. Press the OK button.
5. Press the SETUP or RETURN button to exit
the menu.
4:3 PS (Pan Scan)
video is played, this
mode clips the right and
left sides of the image so
that it can be viewed on
a conventional screen.
DVDs that do not
permit Pan Scan
mode playback are
automatically played in
bands top and bottom).
4:3 LB (Letter Box)
video is played in this
mode on a conventional
screen, black bands
appear at the top and
bottom of the screen.
16:9 (Wide Screen)
mode for playing
widescreen videos on
a wide-screen.
Notes:
DVD. Therefore, the playback picture of some
DVDs may not conform to the picture size you
select.
picture size only, the playback picture always
appears in the 4:3 picture size regardless of
the TV shape setting.
to the actual TV in use if you connect the unit
to a TV.
Default
1. Press the SETUP button.
2. Press the
/
3. Press the OK button, then the
/ button
4. Press OK
RESTORE WARNING
Reset to
factory default?
10 SECS
YES NO
5. Press the /
press the OK button, the original setting
will be restored. The unit will exit the default
setting menu automatically and re-load the
disc in the disc tray.
Note: It will take 3-5 seconds to reset the DVD
player to the factory default.
Audio Output
1. Press the SETUP button.
2. Press the
/ button to select (audio).
3. Press the
/
OUT.
4. Press the OK button, then press the
/
button to select the output sound format (OFF,
5. Press the OK button.
6. Press the SETUP or RETURN button to exit
the menu.
RAW Disc audio raw data will be output.
Select this when connected to a multi-
channel (eg home theater) “surround
PCM Select this when connected to a stereo
amplifier.
OFF To disable Digital Output.
Note: If you connected to a TV using HDMI, and
1. Press the SETUP button.
2. Press the
/ button to select (video).
3. Press the
/ button to select the option
the OK button.
4. Press the
/ button to select a preferred
value, then press the OK button. (The screen
will change to your selected setting).
5. Press the SETUP or RETURN button to exit
the menu.
System
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
- 5 - - 6 - - 7 - - 8 -
OSD Language
1. Press the SETUP button.
2. Press the
/ button to select
(language).
3. Press the
/ button to select OSD
Audio
Video
Tra ck
Chapter
Title
Time
Folder(s)
Files within the
current folder
Language
16:9
Cut off when a wide-
screen video image
is played.
4:3 PS
4. Press the OK button, then the / button
5. Press the OK button.
6. Press the SETUP or RETURN button to exit
the menu.
Audio Language
1. Press the SETUP button.
2. Press the
/ button to select
(language).
3. Press the
/
4. Press the OK button, then the
/ button
5. Press the OK button.
6. Press the SETUP or RETURN button to exit
the menu.
Note: Some DVDs may not be played in the
programmed on the disc.
Subtitle Language
1. Press the SETUP button.
2. Press the
/ button to select
(language).
3. Press the
/
4. Press the OK button, then the
/ button
5. Press the OK button.
6. Press the SETUP or RETURN button to exit
the menu.
Notes:
in a different language other than the ones
be programmed on the disc.
selections using the disc menu only. If this is
the case, press the MENU button and choose
the appropriate subtitle language from the
selection on the disc menu.
Menu Language
1. Press the SETUP button.
2. Press the
/ button to select
(language).
3. Press the
/
4. Press the OK button, then the
/ button
5. Press the OK button.
6. Press the SETUP or RETURN button to exit
the menu.
Note:
language. In this case, the DVD player
automatically displays disc menus consistent
811-727791W042
Title Chapter
PROGRAM
PLAY CLEAR
Tra ck
PROGRAM PLAY CLEAR
White
White
Red
Red
(Red and White)
system, etc.
ANALoG CoNNECTIoN
OPTICAL
DIGITAL IN
DIGITAL
AUDIO IN
Coaxial Digital
Or
Optical Digital
DIGITAL CoNNECTIoNS (preferred)
in jack or digital audio input jack
2009-06-30 14:47:12