Manual

eh er ¢@nnec @ns and
Consult the manual
that came with your
receiver to connect it
properly.
DVD Recorder
OUTPUT AUDIO L (lef_ DIGITAL AUDIO DIGITAL AUDIO
and R (nght) COAXIAL OPTICAL
Advanced Audio Connection Information
Both Dolby Digital® and DTS® are audio formats used to record 5.1 -channel audio signaIs onto the digital track of film (while the fitm is being made).
Both of these formats provide up to six separate channels:left, right, center, left rear, right rear, and common subwoofe_ The disc wilt play 5.1 -channel
sound only i{ you've connected a DTS or Dolby Digital receiver or decoder and if the disc is encoded in the Dolby Digital or DTS format.
Please Read This Before Using the DIGITAL AUDIO Jacks!
This unit's digital output jacks are designed for a connection to a Dolby Digital or DTS receiver or decnde_ Older digital equipment may not be compatible w_th the Oothy Digital
bitstteem. Such a connection can create a h_gh level of noise that me}, be harmful to your eats, and could damage headphones or speakers./t _ important to choose the correct
D_tel output setting in the System Options menu, especio//y when you use tither of the DIGITAL AUDIO OUT jacks. For more ioformation, go to page 48.
Connecting your DVD Recorder to an audio/video receiver
You'll need to consult instructions that came with your audio video receiver in order to connect it properly. The information below
provides general guidelines for the DVD Recorber's Audio Output Jacks.
For a basic audio connection, connect the left and right audio cables to your audio/video receiver and to the OUTPUTAUDIO L (left - white) and R
(right - red) jacks on the back of your DVD Recorder.
g you have a Dolby Digital or DTS receiver_ use one of the DIGITAL AUDIO OUT jacks to connect the receiver to the DVD Recorder.You must also
ndjust the Digital Output setting (go to page 48 for information).
Notes:
Tile DIGITALAUDIO OUTPUTjack has two options: OPTICALand COAXIAL Some DolbyDigital receivershave one type of DigltalAudlo Input jack, and some have both. Under
most conditions,nptical and coaxial connectionswork equallywell -- the oldy differenceis the type of cable you connect to the jack.
If you want to use a lessexpensivecable,connect a coax_l cable to the COAXIALjack. Randy,but sometimes,coaxialcables -- e@eciolly longones,pick up radio frequency
(RF)interference from householdappllances,nearbypower h_es,and/or broadcast towers.
If you would rather use the OPTICALjack, connectan nptical digital cable to the DVD Recorderand to the correspondingdigital optical input jack on the recelve_
Removethe protective coverthat's in the DIGITALAUDIO OPTICALjack before co_ecting cables.
Maeufsctured unde licenseI,om Dolby Labo arouses'Dob x' and the aouble D syrrbo am trademarks of Dolby Labor,tobies Confider,lia_u%_blished works @
1992 1997Dolby Laborato_es,Inc All lights i_served
DIS isa re8iste_edtladernark of Digital Homelheate_ Systems,_nc
I 0 Graphics contained within this puhlicafio_ are for representation only.