Manual

4) Channel Search
The DVD Recorder automatically scans the signal coming through the cable
connected to the RFANTENNA/CABLE INPUT or the INPUT jacks, and prepares
the channel _ist.The channel list determines what channels appear when you press
the channel up and down buttons.
A progress indicator appears on theTV screen.When the Channel Search reaches
100%, press OK (the Channel List appears)
5) Channel List
The Channel List contains the channels you tune to when you press the CH+ and
CH- (channel up and channel down) buttons on the remote control From the
Channel List screen, you can delete channels you rarely watch.You'll still be able to
tune to the "deleted" channels directly by using the number buttons on the remote
control, but the DVD Recorder won't tune to a channel you delete when you press
the CH+/CH_ buttons on the remote control.
Press the down arrow button to scroll through the cbenne_s.A cbeckmark in the box
next to the channel means it has been stored in the channel list. Follow the on-screen
instructions to de_ete a channel in the list, or add one that isn't in the list.You can
also label channels by pressing the INFO button.
To skip editing the channel list, press the right arrow button.
If you didn't connect a satellite receiver, go to step 7
If you connected a satellite receiver, go to step 6
6) Satellite Receiver
If you connected a satellite receiver to the DVD Recorder, the G-LINK cable must be
connected to the back of your DVD Recorder (IRA SAT jack) and the other end of
the cable must be placed in front of the remote sensor on the satellite receiver in
order for the DVD Recorder to contro_ the satellite receiver for Timer Recordings.
(Go to page I I for instructions.)
Turn on the satellite receiver and follow the on-screen instructions to select your
sateflite receiver brand, ff your brand isn't listed, highlight Not Listed.
After you comptete the on-screen satellite receiver setup, the DVD Recorder wilt
perform a box test -- follow the on-screen instructions.
7) Time and Date
You muse set up the dock accurately in order for Timer Recordings to work.
Use the number buttons on the remote to enter Year, Date, and Time. To change the
AM/PM setting when you're entering the Time, press the right arrow button.
Note:If thls screendoesn't appear,you can set the time later from the main menu-- w_:hthe remote
in DVD mode, pressMENU, select Setup,select Installation, select Clock Setupand follow the om
screen _llstructions.
hTV
Watch TV
When the set-up procedure is complete, the main menu appears with the WQtch
TV menu highlighted.To watch TV, iust press the OK button on the remote.
14 Graphics contained within this publica_on are for representation only.