Manual

Using Your TV and Remote
With VCRs: Setting the VCR1 Channel
The VCR 1 Channel works with VCR on the remote. If the VCR 1 Channel
is set, pressing VCR selects the channel to see the VCR picture. The VCR 1
Channel setting depends on which diagram you have used from the
Connection Guide. If you want to turn this feature off, set the VCR 1
Channel to Disable. Refer to the chart below for your setting.
1. Select the Setup Menu
13
A. Press "IVto set the remote to
control the TV.
B. Press MENU°PROG to select the
Setup menu. This menu is
white.
\
2. Highlight VCR1 Channel
;ontrols Alarm Ad
13
A. Press MOVE • (down) to
highlight the VCR 1 Channel.
B. Press • to highlight the channel.
3. Enter channel number
Controls Alarm Ad
13
A. Enter channel 00, 03, or 04. -
Choose your setting from the
chart below. Press CHANNEL
down until "Disabled" is
displayed to turn the feature off.
Diagram used from the
Comtecfion Guide: Set VCR1 Channel to:
1B, 1C, 2B,'2CI 3B, 3C, 4C, 5C 00
, 4B, 5B
• =
3 or 4 (same as 3/4 switch)