32” LCD Television TV with DVD MODEL: RLCDV3282A
Contents Contents Caution Safety Information 2 3 Unit and Accessories 4 Introduction 1. Front View 2. Rear View 3. Instruction for Wall Mount 4. Remote Control 5-10 5 6 7 8-10 Basic Operation 11 OSD Menu 1. Picture menu 2. Sound menu 3. Channel menu 4. Parental Control menu 5. Setup menu 6.
Caution Caution is intended to alert the user to the presence of un-insulated "dangerous to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information Safety Information Electrical safety power Physical safety 3
Unit and Accessories Unit and Accessories Remote control Batteries: 2xAAA TV set Instructions for fixing stand Instructions for fixing stand User's manual AC Cord 4
Introduction Introduction Please insert a 12cm disc according to the silk 1. Front View INPUT MENU CH+ CHVOL+ VOLPLAY EJECT POWER Power Indicator Remote Control window (Keep clear) 1). (IR) Infrared Receiver: Receives IR signals from the remote control. (Power on/Standby)LED Indicator: Press POWER to turn on and off.
Introduction 2. Rear View Y Coax RF VGA PC-IN HDMI1 HDMI2 HDMI3 USB (Service) Video Pb Pr R in L in R L R L AUDIO OUT AC POWER IN: Connect it to AC100-240V~ 50/60Hz power supply with the mains cable. COAX : Digital audio output. RF : Connect antenna or cable 75 Ohm coaxial to receive TV signal. HDMI1/2/3 : Connect it to the HDMI output of video device. USB(Service) : For service use only. YPbPr : Connect them to the video output terminal of DVD.
Introduction 3. Instruction for Wall Mount The wall mount kit (not included) with your purchase allows you to mount your RCA TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. RCA is not responsible for any damage to the product or injury to yourself or others resulting from the wall-mounting.
Introduction 4. Remote Control The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote control may not work correctly if it is operated out of range or out of angle. INPUT Press to display the input source menu INPUT POWER Press to turn the TV on/standby PICTURE Press repeatedly to cycle through the available video picture modes. 1 2 3 4 5 6 SOUND Press to cycle through the different sound settings.
Introduction INPUT 1 2 3 4 5 6 7 8 0 PICTURE SOUND Number buttons for DVD. Pressing “-/--”button to display “SELECT 10+”, and press a number button to play the program. DISPLAY( In DVD) Press to display the current mode’s information. 9 LANGUAGE Select DVD disc language. SLEEP DISPLAY CH+ VOL+ MUTE CH- VOL- DVD eject. MENU EXIT Play/Pause DVD program. Stop DVD program. OK SETUP DVD system setup. DVD fast reverse. DVD fast forward. DVD previous chapter. DVD next chapter.
Introduction Installing Batteries 1. Open the battery compartment cover on the back of the remote control. 2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery compartment. Don’t mix different types or used batteries with new ones. 3. Close the cover. - The remote control should be operated within 23 feet(7m) and 300 to the left and right of the IR Receiver on the front of the TV. - Used batteries should be disposed properly.
Basic Operation Basic Operation Power on/off 1. Connect to the power supply with the power cord. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. Input Source select Press INPUT button on the TV set or remote control to display input button source menu, and use CH+/- button on the TV set or on remote control to select the input source, press OK button on the remote control to enter.
OSD Menu OSD Menu 1. Picture menu Description Picture Settings: Press button to enter the Picture Settings menu. Picture mode: Select between Dynamic, Standard, Movie, User and Power Saving. You may select the picture mode directly by pressing the PICTURE button on the remote control. Note: when select the "Power Saving", the machine is in energy-saving status(4.1). Brightness: Adjust brightness of the picture. Contrast: Control the difference between the bright and dark regions of the screen picture.
OSD Menu OSD Menu Advanced Picture Settings: Press button to enter the Advanced Picture Settings. Dynamic Contrast: Select the dynamic contrast mode between Off, Low, Medium and High. Film Mode: Activate or deactivate the Film Mode. Noise Reduction: If the broadcast signal received is weak, you can select the DNR option to reduce the video noise level between Off, Low, Medium and High.
OSD Menu OSD Menu 2. Sound menu Description Sound Settings: Press button to enter the Sound Settings menu. Sound Mode: Select your desired picture mode as follow: Dynamic, Standard, Soft and User. You may select the sound mode directly by pressing the SOUND button on the remote control. Bass: Low frequency intensity. Treble: High frequency intensity. Balance: Left and right stereo audio channels balance. Surround Mode: Activate or deactivate the Surround function.
OSD Menu OSD Menu 3. Channel menu Cable Description Channel List: Display the channel list. Favorite List: Display the favorite channel list. Channel Settings: Press > button to display the Channel Settings menu. Press button to select the item, and press OK button to change the setting. Signal Type: Allow you to select antenna between Air and Cable. Auto Channel Search: Press OK button to start auto channel search.
OSD Menu OSD Menu 4. Parental Control menu You must enter the password to gain access to the Parental Control menu. The default password is 0000. You may modify the following options: Description V-CHIP: Press button to enter the V-CHIP menu. US V-CHIP: Press button to enter the US V-CHIP menu. Movie Rating: The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America (MPAA) as broadcasted on cable TV and not edited for television.
OSD Menu OSD Menu Canada V-CHIP: Press button to enter the Canada V-CHIP menu. English Rating: Select among: C, C8+, G, PG, 14+ and 18+. French Rating: Select among: G, 8ans+, 13ans+, 16ans+ and 18ans+. Block UnRated Show: Activate or deactivate the Block UnRated Show function. Downloadable Rating: Setting the Downloadable Rating in DTV mode when the program has the rating information. Clear Downloadable Data: Clear the downloadable data of the TV.
OSD Menu OSD Menu 5. Setup menu Description Closed Caption: Press button to enter the Closed Caption menu. Caption Display: Activate or deactivate the Caption displaying. Analog Caption Type: Allow you to select the basic selection among: CC1, CC2, CC3, CC4, Text1, Text2, Text3 and Text4. Digital Caption Type: Allow you to select the advanced selection among: Service1, Service2, Service3 Service4, Service 5 and Service 6. Digital CC Preset: Select the Digital CC Preset between Default and Custom.
OSD Menu OSD Menu 6. Others menu Description Blue Screen: Turn on/off the blue screen function when there’s no signal. No Signal Power Off: The TV will turn off automatically if there’s no signal after 10 minutes. No Operation Power Off: The TV will turn off automatically if there’s no operation on the TV after 3 hours. All Reset: Reset all the settings.
DVD Operation DVD Operation Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC". Insert Disc according to picture next to disc slot. Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player.
DVD Operation DVD Operation 21
DVD Operation DVD Operation 22
DVD Operation DVD Operation 23
DVD Operation DVD Operation or NO disc 24
DVD Operation DVD Operation 25
DVD Operation DVD Operation 26
OSD Menu OSD Menu 27
Simple Troubleshooting Simple Troubleshooting If the TV has failed or its performance has seriously deteriorated, check the TV by using the following simple troubleshooting guide. If you can not resolve the problem with this troubleshooting, please call RCA Technical Support. No power - Check all power connections to the TV. - Press either the power button or the Standby button on the Remote control. No picture or sound - Ensure that the TV is plugged in and the power is on.
LCD Viewing Picture Size (diagonal) 32”(Diagonal) Resolution 1366x768 Aspect Ratio 16:9 Display colours 16.
LIMITED PRODUCT WARRANTY RCA CANADA TV EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND AS DESCRIBED BELOW CURTIS INTERNATIONAL LTD EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES AND CONDITIONS WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES). What your warranty covers: • Defects in materials or workmanship to the original purchaser.
