HDTV with DLP technology High-Definition Television User’s Guide
Important Information WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
Introduction Thank you for choosing RCA Scenium Congratulations on purchasing this RCA Scenium High Definition Television (HDTV) featuring Digital Light Processing™ (DLP™) technology—a true viewing experience. Your purchase decision represents an investment in a new generation of technology— DLP and HDTV. Even though this is a technologically advanced HDTV, it is the most user-friendly of its kind— with comprehensive on-screen instructions that guide you through all of the TV’s features.
Introduction Part 2: Why RCA Scenium DLP is better DLP is just part of the story. You have chosen to embark on the next generation of TV viewing— HDTV. There are many technological advancements that make HDTV better than analog TV, but there are basically three things about HDTV that bring you a superior viewing experience: (1) resolution, (2) aspect ratio, and (3) digital signal and sound. Resolution (it’s math...
Introduction Digital Signal and Sound The analog television broadcast system that has been used in the United States for the past 50 years transmits signals as electronic waves. These waves can suffer degradation as the signal travels to your home. Additionally, the analog waves are susceptible to interference from planes passing overhead, weather, and household appliances.
Introduction Audio System Enjoy the great sound system in your HDTV with 30 watts total power. Your HDTV has front speakers with two 1” tweeters and two 5” midrange drivers. A 7-band on-screen graphic equalizer allows customization of the sound quality. You can take advantage of the 6-Channel direct Audio Outputs (Matrix Surround, Subwoofer, etc.) if you have an amplifier you want to connect to your HDTV.
Table of Contents Introduction .............................................................................................. 1 Chapter 1: Connections & Setup Things to Consider Before You Connect ........................................................................................ 8 Protect Against Power Surges .................................................................................................. 8 Protect Components from Overheating ..........................................................
Table of Contents Auto Tuning Feature ...................................................................................................................... 43 PIP (Picture-in-Picture) Operation ................................................................................................. 44 Emergency Alert System (EAS) ..................................................................................................... 45 Chapter 4: Using the TV’s Menu System Menus, On-screen Help, and Control Panels .
Chapter 1 Connections & Setup Chapter Overview: • Things to Consider Before You Connect • Choose Your Connection • Explanation of Jacks and Cables • The Front of Your TV • How To Connect • Plug in the TV • Put Batteries in the Remote • Turn on the TV • Use the Remote Control to Complete the Assisted Setup • Complete the Assisted Setup • Next Steps Graphics contained within this publication are for representation only.
Connections & Setup Things to Consider Before You Connect Protect Against Power Surges • • • Connect all components before you plug any of their power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. Turn off the TV and/or component(s) before you connect or disconnect any cables. Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with your TV.
Connections & Setup Choose Your Connection There are several ways to connect your HDTV, depending on the components you want to connect and the quality of the signal you want to achieve. Please use the following chart to determine which connection is best for you. Proceed to the appropriate page and connect your TV. For more information about the relationship between the cables, jacks, and the quality of the signal you see on your TV, go to the following page. Note for U.S.
Connections & Setup Explanation of Jacks and Cables The diagrams below illustrate jacks found on the back of the TV. When connecting cables, be sure to connect corresponding outputs and inputs (video input into video out, right audio input into right audio out, etc.). This section describes the jacks and cables you might use to make connections (cables may be ordered separately by calling the number on page 72). There are several ways to connect components to your TV.
Connections & Setup AUDIO/VIDEO OUTPUT Connect a VCR or DVD-recorder to record digital and analog programs from the Cable or Antenna Input (excluding copyprotected programs and component video formats) while the TV is turned on. You must leave the TV on the same channel you are recording. AUDIO/VIDEO OUTPUT R L V Composite Audio Cable (RCA Type) • R Audio provides right audio connection and connector is usually red. • L Audio provides left audio connection and connector is usually white.
Connections & Setup COMPONENT/COMPOSITE INPUTS Use menu for composite video. R R L L INPUT 4 PR PR INPUT 2 PB PB Y/VIDEO Y/VIDEO Y (green) PR (red) Component Cables PB (blue) Tip Inputs 2/4 can be used as either a component video (Y PB PR ) input or a composite video (Y/Video) input. Go to the Connections menu, choose Video Input Setup and select which video input source you are using.
Connections & Setup CableCARD™ HDMI/DVI INPUT Use menu for DVI audio. CableCARD Allows you to use a digital cable television card to receive digital cable services, including premium and HDTV cable channels, without the need for a set-top box. Go to page 18 for information on using the CableCARD slot. HDMI/DVI INPUT (High-Definition Multimedia Interface/Digital Visual Interface) Provides an uncompressed digital interface that carries both video and audio data by way of an integrated mini-plug cable.
Connections & Setup The Front of Your TV Front Input Jacks The TV has front input jacks for convenience in connecting a camcorder, digital camera, or video game system. Look for a hinged door and press to open the cover. Please note the illustration below is just an example of how these jacks might appear. Notes: When you plug in headphones, the TV’s internal speakers are muted. Use the VOL up or down button to control the volume.
Connections & Setup DVD WO P +L OV — R AUDIO L R AUDIO L VIDEO IN RE LO V HC HC UN EM PR VIDEO PB Y S-VIDEO OUT 2B 2A DVD L/ L/ L/ TV TV CENTER R REAR Use menu for composite video.
Connections & Setup SATELLITE RECEIVER VIDEO RE WO P +L OV — R AUDIO S-VIDEO L LO V HC HC UN EM TV 3 TV CENTER R REAR e llit r e t S a eive c Re Use menu for composite video.
Connections & Setup TV CENTER R REAR Use menu for composite video.
Connections & Setup TV CENTER R REAR Use menu for composite video.
Connections & Setup Audio Connections With the audio versatility of your HDTV, you can choose various connection options depending on the type and quality of sound that you want. From good to best sound, choose one of the options or refer to the user’s manual of each component that you are connecting to get the best results. • Use your TV’s internal speakers (good sound). • Connect audio/video receiver (speakers connected to receiver) to your TV (better sound).
Connections & Setup TV + – R REAR Use menu for composite video.
Connections & Setup Plug in the TV Plug the flat end of the cable into the power jack on the back of the TV. Then plug the other end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug the TV into an outlet controlled by a light switch. Note: When you first plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 seconds and then go off during the initialization of the TV.
Connections & Setup Main Menu 0 Go Back Closed Captioning Setup 1 Continue 2 Cancel Setup Set the Menu Language Preferences English Highlight with the and arrows. Select with the OK button. 1. Use arrow buttons to highlight your preferred language for the menu system. 2. Press OK to select that language. 3. Select Continue Setup. Español Resalte con las flechas y . Seleccione con el botón OK. Français Mise en surbrillance avec et . Sélection avec OK.
Chapter 2 Using the Remote Control Chapter Overview: • The Buttons on the Remote Control • Programming the Remote to Operate Other Components • How To Use the Remote After You’ve Programmed It • The Learning Feature • Volume Punchthrough Feature • Using the INPUT Button • Remote Code List Graphics contained within this publication are for representation only.
Using the Remote Control ON-OFF Arrows (up, down, left, right) Used to move through the on-screen menus. When not in the menu system, moves the PIP window. Go to page 44 for more information on PIP. learning TV DVD VCR SAT/CAB PIP AUDIO AUX SWAP CH. CTRL FREEZE PRESETS CC The Buttons on the Remote Control FAV LIGHT CC FORMAT INFO (0-9) Number Buttons Enter channel numbers and time settings. Also used in the TV menu to make selections. ANT•CAB Switches between Antenna and Cable Input.
Using the Remote Control Tips INFO Brings up the Channel Banner with channel and viewing information. Press again to remove the banner. The component button corresponding to the mode you’re in flashes when the remote batteries are low and you press a button on the remote. Also, a message might appear on the TV screen and disappear within a few seconds. Press CLEAR and replace the batteries to remove the message.
Using the Remote Control ON-OFF learning DVD SAT/CAB Programming the Remote to Operate Other Components VCR AUX AUDIO CLEAR The universal remote can be programmed to operate many brands of remotecontrollable VCRs, audio components, DVD players, cable boxes, satellite receivers and other components. In addition to being programmed to operate your television, it’s already programmed to operate most RCA components.
Using the Remote Control 4. Press and release PLAY, then wait 5 seconds or until the component button stops flashing. At this point the remote is searching for the correct code to program. If, after 5 seconds, the component you want to operate does not turn off, press PLAY again to tell the remote to search the next set of codes. Continue pressing and releasing PLAY until the component turns off or you have searched through all of the codes.
Using the Remote Control The Learning Feature Before using the learning feature, make sure this TV’s remote control is programmed to control other components you have connected to the TV. Programming the remote control erases all learned commands for that component mode. After you program the TV’s remote control to operate the other component, the TV’s remote provides most of the operations you need.
Using the Remote Control 1. Press and hold the component button on the TV’s remote that applies to the function you will be adding (DVD, VCR, SAT/CAB, AUDIO, or AUX). The component button lights. 2. On the TV remote, press and hold the RECORD button. 3. Keep pressing both of the buttons (the component button and the RECORD button) until the component button light turns off, flashes, and turns off. Release both buttons. 4.
Using the Remote Control Volume Punchthrough Feature You may find this feature helpful if you’ve connected your components to an audio/video receiver (A/V receiver) or amplifier, but you want to use the TV’s remote control to operate the volume for the receiver. An example follows: Let’s say you’ve connected your DVD player to your audio/video receiver. You’ve also programmed your TV remote control to operate your DVD player.
Using the Remote Control Input source Acquiring Channel... 00:30 12:30 AM 12:39 PM Front Input Listening to English in SRS MPAA - Not Rated DVD 4:3 Normal 480i SD Note: Watch the Channel Banner to see the input sources change each time you press the INPUT button. Using the INPUT Button 1. Repeatedly press the INPUT button to scroll through the available input sources until you find the input associated with the component (such as VCR or DVD player) you want to view. 2.
Using the Remote Control TV Codes Programmable for DVD, VCR, SAT/CAB, AUX, and AUDIO buttons. TV2 ............................................................................. 1222 TV3 ............................................................................. 1223 DVD codes Programmable for DVD and AUX buttons. DVD Aiwa .................................................................. 3010, 3021 Apex ................................................................. 3023, 3024 Broksonic ................
Chapter 3 Using the TV’s Features Chapter Overview: • About the Channel Banner • Digital or Analog TV Channels • Parental Controls • How V-Chip Works for the USA and Canada • Auto Tuning Feature • PIP (Picture-In-Picture) Operation • Emergency Alert System (EAS) Graphics contained within this publication are for representation only.
Using the TV’s Features Program Title/Acquiring Channel Ch 8-1 WLPJ Listening to English in SRS MPAA - Not Rated 12:30 AM 00:30 12:39 PM Antenna Input 16:9 Normal 1080i HD About the Channel Banner The Channel Banner appears when you press the INFO button on the remote. If an icon in the channel banner is grayed out (dim), the feature is not available. The following list describes the items on the Channel Banner screen (left to right and top to bottom).
Using the TV’s Features Digital or Analog TV Channels A single off-air antenna can pick up both analog and digital channels. Digital channels can be made up of primary channels and subchannels. Note: Subchannels (sometimes called minor channels) are channels associated with the Primary channel (sometimes called the major channel). A primary channel may have just one subchannel or multiple subchannels.
Using the TV’s Features Main Menu 0 Go Back 1 Picture Quality 2 Audio 3 Parental Controls 4 Connections 5 Preferences 6 Assisted Setup The Parental Controls menu lets you set up the Locked and Unlocked channel lists, ratings, and blocking features: •Lock TV/Unlock TV: Choose to either lock or unlock the TV. •Video Input List: Choose the inputs to be seen or hidden. •Cable Channel List: Choose channels for the Cable Input. •Antenna Channel List: Choose channels for the Antenna Input.
Using the TV’s Features Editing Channels in the Channel Lists All the lists can only be edited through the Unlocked List and Locked List in the Parental Controls menu. You can remove or “hide” a channel from the Unlocked List by removing the check mark in the box. Also, you can remove or “hide” a channel from the Locked List by selecting Blocked in the Locked List. When you press the channel buttons, that channel will be skipped.
Using the TV’s Features USA V-Chip Rating Limit Screen The following is an example of where items are located within the V-Chip TV Rating screen below the USA V-Chip menu. Rating Status Field Lets you select whether the status of the age-based Rating Field rating limit to the left is Viewable or Blocked. Content Themes Lists the content themes you can block or view. Lets you select from a list of age-based ratings Main Menu you can block or view.
Using the TV’s Features Blocking Age-Based Ratings You can automatically block all program ratings above a specified age-based rating level. For example, if you only want your child to watch programs that have a TV-G rating and lower (in other words, you want the child to watch TV-G, TV-Y7, and TV-Y), then you need to block out higher ratings. To block programs with higher ratings: 1.
Using the TV’s Features Viewing Specific Content Themes If you block specific content themes, you have the option of going back and changing some of the content themes back to (V) Viewable: Content Themes D Sexually explicit dialogue L Adult language S Sexual situations V Violence FV Fantasy Violence Main Menu 0 Go Back 1 V-Chip TV Rating 2 V-Chip Movie Rating Parental Controls "X" "NC-17" Determine the content themes you want to change to (V) Viewable. 2.
Using the TV’s Features Canada V-Chip Canadian TV V-Chip supports two different Canadian rating systems: English and French. Age-Based Rating 18+ 14+ Canada V-Chip English Rating System Adults. Programming intended for adults 18 and older. It may contain elements of violence, language, and sexual content which could make it unsuitable for viewers under 18. Violence guidelines: may contain violence integral to the development of the plot, character or theme, intended for adult audiences.
Using the TV’s Features Age-Based Rating Canada V-Chip French Rating System 18+ Adults. Programming is for adults only. This program contains sustained violence or extremely violent scenes. 16+ Viewers 16 and over. Programming is not suitable for those under age 16. This program contains frequent scenes of violence or intensely violent scenes. 13+ 13+ (Viewers 13 and over) Programming may not be suitable for children under the age of 13.
Using the TV’s Features Main Menu 0 Go Back 1 Lock TV 2 Video Input List 3 Cable Channel List 4 Antenna Ch. List 5 USA V-Chip 6 Canada V-Chip 7 V-Chip Unrated 8 Front Button Block Front Button Block Parental Controls Selecting this option lets you block (disable) or unblock (enable) the TV’s front buttons. The remote still tunes to any channel.
Using the TV’s Features Channel 2, 3 or 4 Antenna Input Component is connected to the ANTENNA INPUT jack on the back of the TV, and you want the TV to tune to channel 2, 3, or 4 when you press the corresponding button on the remote. Reminder: make sure the component’s Channel 2/3 or 3/4 switch is set to match the channel you choose in Auto Tuning.
Using the TV’s Features Using the PIP Feature The PIP feature is only available for analog (NTSC) channels; PIP won’t work when tuned to a digital (ATSC) channel. Use the channel banner to determine whether a channel is digital or analog. A digital (ATSC) channel has a dash and second number after it (e.g., 21-2); an analog channel doesn’t (e.g., Ch 21). While you may use PIP in different ways, this basic PIP scenario should get you started. When watching an analog channel, follow these steps. 1.
This page intentionally left blank
Chapter 4 Using the TV’s Menu System Chapter Overview: • Menus, On-Screen Help, and Control Panels • Picture Quality Menu • Audio Menu • Connections Menu • Preferences Menu Graphics contained within this publication are for representation only.
Using the TV’s Menu System Menus, On-screen Help, and Control Panels This section highlights your TV’s on-screen menu system. The menu system has several types of screens. An overview follows. Note: The Parental Controls menu items is discussed in the Features chapter, while Assisted Setup is discussed in the Connections and Setup chapter.
Using the TV’s Menu System Sliders 6 Balance Sliders are used to select a specific point of a control that has continuous levels. To make adjustments: 100 50 0 51% 61% 48% 45% 13% 1. Highlight the slider for the feature you want to adjust. 2. Press the up or down arrow button to adjust the indicator on a vertical slider. Press the left or right arrow to adjust the indicator on a horizontal slider. Choice Lists Check boxes and radio buttons are used to select options from a list.
Using the TV’s Menu System Picture Quality Menu Main Menu 0 Go Back 1 Picture Quality 2 Audio 3 Parental Controls 4 Connections 5 Preferences 6 Assisted Setup The Picture Quality menu has screens for optimizing the picture for each of the TV's inputs: The Picture Quality menu contains menus to configure video settings: Picture Settings, Picture Presets, Auto Color, Color Warmth, Noise Reduction, Green Stretch, Edge Enhancement, Contrast Expand, and Advanced Settings. Each one is described below.
Using the TV’s Menu System Main Menu 0 Go Back 1 Picture Settings 2 Picture Presets 3 Auto Color 4 Color Warmth 5 Noise Reduction 6 Green Stretch 7 Edge Enhancement 8 Contrast Expand 9 Advanced Settings Off When Auto Color is set to On, it minimizes flesh tone variations. Normal Warm Color Warmth automatically adjusts the "temperature" of the picture. Cool gives a more blue pallete of picture colors. Warm gives a more red pallete of picture colors. A change in this screen is applied to Input 2.
Using the TV’s Menu System Main Menu 0 Go Back 1 Picture Settings 2 Picture Presets 3 Auto Color 4 Color Warmth 5 Noise Reduction 6 Green Stretch Edge Enhancement 7 SVM 8 Contrast Expand 9 Advanced Settings Contrast Expand Contrast Expand makes the picture appear brighter by deepening the black parts of the picture. This also helps to maintain a more consistent black level from one scene to the next. The options are Off, Low, and High. Low High A change in this screen is applied to Input 2.
Using the TV’s Menu System Audio Menu Main Menu 0 Go Back 1 Picture Quality 2 Audio 3 Parental Controls 4 Connections 5 Preferences 6 Assisted Setup The Audio menu has screens for setting the audio features and for tweaking the sound: The Audio menu lets you adjust audio output. To access the Audio menu, press MENU on the remote, and then select Audio from the main menu.
Using the TV’s Menu System Main Menu 0 Go Back 1 Equalizer Presets 2 Audio Processor 3 Sound Logic 4 Audio Mode 5 SAP 6 Balance 7 Audio Connections Sound Logic Audio Off On Turning Sound Logic on will monitor a program's audio track and limit volume excursions to a minimum and maximum volume range from the current volume setting.
Using the TV’s Menu System Main Menu 0 Go Back 1 Equalizer Presets 2 Audio Processor 3 Sound Logic 4 Audio Mode 5 SAP 6 Balance Fixed/Variable Connections Out 7 Audio Audio Connections Audio The Audio Connections menu has screens for setting up inputs or outputs that are associated with audio: •Fixed/Variable Out: Choose output type; set up subwoofer. •Digital Audio Out: Choose either Auto Select or PCM output. •DVI Audio Input: Choose a TV audio input for a DVI device.
Using the TV’s Menu System • Main Menu 0 1 Fixed/Variable Out 2 Digital Audio Out 3 DVI Audio Input 4 Center Speaker In Go Back Audio Connections Select the audio source for the TV's internal speakers: The TV The center channel ouput from an audio receiver. The TV's internal speakers can be used as a center speaker. To do so, connect an external audio amplifier's center channel output to the Internal Speaker Input on the TV. Then select the matching option from the list above.
Using the TV’s Menu System Main Menu 0 Go Back 1 Signal Strength 2 Channel Search 3 Software Upgrade 4 Signal Source 5 Video Input Setup 6 Auto Tuning 7 Special Features 8 Ethernet Setup Connections Current TV Software Version and Date: A2.0B/B2.0A If you have a connection to the TV's Ethernet jack, your TV may periodically alert you to the availability of a TV software upgrade which can be downloaded through the Ethernet jack.
Using the TV’s Menu System Main Menu 0 Go Back Text here Channel 1 Initial 2 Initial Volume 3 Maximum Volume 4 CableCARD Tools 5 Remote Setup Connections Special Features Select what should occur when power is restored to the TV: Off: Initial Channel is disabled Special Features The special features options are mostly intended for commercial/retail use.
Using the TV’s Menu System Main Menu 0 Go Back 1 Picture Quality 2 Audio 3 Parental Controls 4 Connections 5 Preferences 6 Assisted Setup The Preferences menu has screens for setting up the TV to match your personal preferences: •Closed Captioning: Choose the look and type of captions. •Screen Format: How to format a picture on the 16:9 screen. •Time Menu: Set up time-related features. •Color Scheme: Pick a color for the menu system. •Translucency: Pick a level of translucency for the menus.
Using the TV’s Menu System • CC1 and Text 1 are the primary caption and text services. The captioning or text is displayed in the same language as the program’s dialog. • CC3 and Text 3 serve as the preferred data channels. The captioning or text is often a secondary language translation, simplified English, or displayed at a slower rate.
Using the TV’s Menu System Main Menu 0 Go Back 1 Closed Captioning 2 Screen Format 3 Time Menu 4 Color Scheme 5 Translucency 6 Menu Language 7 Lamp Power Screen Format Preferences Use this screen or the FORMAT button on the remote to change how the picture is displayed. To the left are examples of the effect of different Screen Format modes on a 4:3 signal. Normal Cinerama Each input can have a different setting for Screen Format and Automatic Format Switching (AFS).
Using the TV’s Menu System Main Menu 0 Go Back 1 Closed Captioning 2 Screen Format 3 Time Menu RecordScheme Output 4 Color 5 Translucency 6 Menu Language 7 Lamp Power Preferences Color Scheme Sky Blue Emerald Raspberry Plum Select from among four colors (Sky Blue, Emerald, Raspberry, and Plum) to change the color of the menu system and banner. You can select from one of four colors for the menu system and the channel banner. Press 5 or 6 to point to an option, then press OK to select it.
Chapter 5 Reference Chapter Overview: • Troubleshooting • Lamp Replacement Instructions • HDTV Specifications • Accessory Information • Limited Warranty • Care and Cleaning • FCC Information • Index Graphics contained within this publication are for representation only.
References Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. Note for U.S. customers: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit you home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. For additional assistance while using your RCA Scenium product, please visit www.
References If your TV is connected to an audio/video (A/V) receiver or home theatre system via the DIGITAL AUDIO OUT jack, read the following information. • • • If you’ve connected a component to your A/V receiver, such as a DVD player or satellite receiver, you may experience a slight delay between the audio heard and the video seen. This occurs because the digital audio is sent directly to the speakers while the video must be processed inside the TV before it is displayed.
References Can’t select certain channel • May be blocked or not approved in the Parental Controls menu. • If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR or INPUT button on your VCR). • You usually can’t change channels when a menu is on the screen (press the CLEAR button). Noisy stereo reception • May be a weak station. Use Audio menu to choose Mono sound.
References Lamp Replacement Instructions Replacing the Lamp Unit Your TV’s source of light comes from a lamp – similar to lamps used in film or front projectors. Although this lamp is longlasting, it may need to be replaced eventually. When to replace the lamp You probably need a new lamp if there’s no picture, but you still can hear the audio and the power light on the front of the TV does the following: blinks 5 times, pauses, blinks 5 times again.
References ___ The correct lamp replacement unit. To order the correct lamp, you’ll need to know your TV’s model number, serial number, and lamp type—this information is listed on the Service Model Number sticker (example of the sticker is shown at right). The sticker is located on the right side of the TV (see picture below for sticker location). ___ The box that the lamp replacement unit came in. 1. Read the precautions listed above.
References 9. Loosen the two screws on the lamp unit inside the TV (the screws stay with the unit so just loosen them, don’t remove them). Step 9 10. As you remove the lamp, pay attention to how the lamp fits so that you can use the proper orientation when you’re installing the new lamp. To remove the lamp unit: • grasp the handles and pull straight back to remove the entire lamp assembly unit from the TV. • place the old unit out of the way where it won’t get broken or dropped. Step 10 11.
References HDTV Specifications** Tuning Capability Channel Tuning ....................................................................... NTSC/ATSC/64 QAM - 256 QAM Digital Cable Compatibility ..................................................... 64 QAM - 256, QAM, HDMI/DVI, .................................................................................................. Component, CableCARD slot Video 3:2 Pull Down (Film Mode) .....................................................
References Convenience Auto Channel Search ........................................................... Multilingual On-screen Display .......................................... Auto Tuning ......................................................................... Closed Captioning ............................................................... Front Button Block .............................................................. Commercial Skip ..................................................................
References Accessory Information Below are accessories available to complement your product. Prices are subject to change without notice. All accessories are subject to availability. A shipping and handling fee will be charged upon ordering, and we are required by law to collect the appropriate sales tax for each individual state, county and locality to which the merchandise is being sent.
References Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor. • One year from date of purchase for parts. • One year from date of purchase for light engine and lamp assembly. The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
References Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
Index Symbols 3:2 pulldown 52 A Accessories 72 Action buttons 49 Adding a learned function 28 Advanced Settings 52 Age-based rating Blocking 39 Viewing 39 Age-based ratings Canada, English 41 Canada, French 43 USA 38 Analog captions 59 Analog TV channel 35 ANT•CAB button 24 Antenna Ch.
Index D Deleting ALL learned functions 29 Digital Cable Ready 3 CableCARD 3 Sound 3 Digital audio out 55 DIGITAL AUDIO OUT jack 12 Digital captions 60 Digital TV channel 35 Direct entry programming 26 DLP 1 Dolby digital 19 DVD button 24 DVD remote codes 32 DVD/VCR remote codes 32 DVI Audio Input 55 E EAS 45 Edge Enhancement 51 Emergency Alert System 45 Equalizer presets 53 ETHERNET jack 12 Ethernet setup 58 F FAV button 24 FCC information 74 Film Mode 3, 52 Fixed/Variable Out 55 Fixed/Variable Output opt
Index Receiver with Dolby Digital 19 RECORD button 25 Remote Programming 26 setup 58 Remote Control Batteries 21 Buttons 24 Remote control Code list 31 Learning feature 28 Remote Setup 58 Replacing the lamp 67, 69 Reset controls 52 Resolution 2 REVERSE button 25 S S-Video jack 11 SAP 54 SAP display 34 SAT/CAB Button 25 Satellite receiver remote codes 32 Screen Format 61 Search Automatic code 27 Channels 56 Second audio program 54 Service, authorized 9 Setup Ethernet 58 Setup, assisted 21 Sharpness 50 Signa
Visit the RCA Scenium website at www.rcascenium.com Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service for your product. TTE Technology, Inc. 10330 North Meridian Street Indianapolis, IN 46290 ©2004 TTE Technology, Inc. RCA and associated marks are trademarks of THOMSON S.A. used under license to TCL-Thomson Electronics (TTE).
