Manual

Connections & Setup
How to Connect: TV + Speakers
You can connect up to two additional speakers to the TV: one to the RIGHT terminal, and one to
the LEFT terminal.
1. If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire
core.
2. Open the lever on the speaker terminal.
3. Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-).
4. Close the lever. Pull gently on the wire to see that it's connected securely.
5. Place the SPEAKER SELECT EXT/INT W/EXT SUP,P, switch is in the INT W/EXT SURR
position to heflr the TV's internal speakers.
6. Go to the Audio menu and Fixed/Variable Out screen and make sure Variable Out - Speakers
On is selected.
Speaker wire
Notes: When connecting the speaker wire, make sure you connect the
positive (+) terminal on the TV to the positive (+) terminal on the speaker.
One side of the speaker wire is usually marked with a white stripe to help
you match the terminals correctly. If the (+) and (-) terminals are not
matched proper/y, the speakers will not be "in phase," causing reduction
in bass frequencies.
Do not allow the wire core to touch other wires or terminals. Damage to
components could result if the cores of two wires touch.
Arrange the speakers in your TV room to achieve maximum sound quality.
BackofRJO!!Speaker
Da_kofLeftSpeaker
Chapter I 11