Manual

Connections & Setup
Back of the TV
The diagrams below illustrate each of the back panel jacks found on the TV. When connecting cables, be sure to connect
corresponding outputs and inputs (video to video, right audio to right audio, etc.).
SELECT _mb_- _j M_I _ Ke,T_G
SN_N?J
2.Vl0EO
INPUT1 INPUTa
TV\
• mpul $
input
RIGHT
EX'_ RNAL SPF..AKER5
LEFT FlY*ED/VARIAISLE_
AUDIO
OUTPUT
SPEAKER _
SELECT
I_Wl R
_ SURR
AUDIO OUTPUTS
RIGHT and LEFTEXTERNALSPEAKERTerminals Used to connect
external speakers for improved fight and left sound, or surround sound.
See page 10.
SPEAKER SELECT - EXT. or INT W/EXT SURR Switch Lets you direct
where the output of the TV's internal speakers goes. With the switch in the
EXT position, you hear the TV's external speakers. In INT W/EXT SURR
position, you hear the internal and external speakers
Note: To turn the TV'_ internal speakers on and off, press MENU on the
remote control and choose Audio. Then choose Fixed/Variable Out from
the menu and choose an option.
FIXED/VARIABLE AUDIO OUTPLrr L/R Provides fixed-level or variable-
level audio output from the television. Fixed (Fixed/Variable is a menu
setting) audio output is ideal for audio recording or for connecting to an
A/V receiver amplifier (-an auxiliary baseband componen0 when you want
to control the volume through the A/V receiver instead of the TV. Variable
is used to connect an A/V receiver or amplifier (an auxiliary baseband
componen0 for variably-controlled stereo output.
14 Chapter 1