Manual

Connections & Setup
CENTERCHANNELINPUT
MAXIMUMAMPUFIERPOWERRATING
INTERNAL (60WATTSinto8 OHMS)
SPEAKER
VIDEO
INPUT t
_.RAuDI{
INPUT 3
Tips
Inputs 314 can be used as either a component
video (Y P_P_) input or a composite video (V)
input. The TV auto detects the connection with
Y P8P8 having highest priorit_.
480i Y P8P_is viewable when using PiPbut 480p
and 1080i are not.
Note: The subwoofer is tur ned on or off via Audio Subwoofer menu.
CENTER SPEAKER INPUT
INTERNAL SPEAKER SOURCE - TV / EXT AMP Switch With the switch
in the "IV position, the TV's sound comes out of the internal speakers, with
the switch in the EXT AMP position, the internal speakers are used for an
external center channel. An external amplifier/receiver can be connected to
the center channel input and the center channel audio comes out of the
TV's internal speakers.
• CENTER CHANNEL INPLrr Used to connect a center channel output from
an audio receiver to the 'IV. If in use, switch the INTERNAL SPEAKER
SOURCE to EXT AMP position.
VIDEO/AUDIO INPUTS
VIDEO _ l/AUDIO INPLrr 1 Lets you connect a baseband NTSC
(analog) component.
V (VIDEO) provides composite video connection and connector is usually
yellow,
L/MONO AUDIO provides left audio connection and connector is usually
white.
Note: If your component hasonly one output for audio (mono), connect
it to the left (white LIMono) audio jack on the TV and don't connect the
right audio part of the cable.
• R AUDIO provides right audio connection and connector is usually red.
S-VIDEO lets you connect an S-Video cable for better video quality picture
to a component with S-Video capability, such as a VCR or DVD player.
When using S-Video, make sure to connect the two audio cables as well as
the S-Video connector.
VIDEO INPLrr 2/AUDIO INPUT 2 Provides connection to a second NTSC
(analog) video component such as a VCR. The jacks are as described for INPUT 1.
VIDEO IN]PUT 3/AUDIO INPUT 3 Used to connect an optional component
(Y PR PR) video source, such as a DVD player or satellite receiver. This
connection provides excellent quality. Note that it is essential to match the color
coded connectors between a compatible device and the "IV.
• AUDIO R/L/MONO The audio jacks provide stereo sound. When connected,
audio volume from the main front and rear speakers are variable.
V (VIDEO) provides composite video connection and connector is usually yellow.
Y Pu Pa Unlike a single video input, component video maintains the video
signal as three separate signals through these three jacks. To ensure
maximum picture quality, use three video-grade cables for the Y PBPR
connections. Accepts 480i, 480p, 1080i signals. Has priority over V
connection.
VIDEO IN'pLrr 4/AUDIO INPLrI" 4 Provides connection to a second optional
component video source, such as a DVD player or satellite receiver. The jacks
are the same as described in INPUT 3.
Chapter 1 15