Quick start Guide

7
Enter your email and create a
password, then press Next.
Connect the camera with your WiFi
network
3
In the RCA Security App, tap
the + symbol in the middle of
the screen.
continues on the next page...
Find the QR code and serial
number on the side of the
oodlight camera. Scan the QR
code with your phone when
prompted by the App (or enter
the serial number manually).
Once the App recognizes your
oodlight’s serial number, the App
asks you to connect to your WiFi
network. Tap the Connect to a
Network button in the App.
In the next screen, enter the
password for the WiFi network
your phone is connected to. Then
press the Next button in the App
to proceed.
Floodlight camera, side
QR code
Follow the directions in the App to
perform the following steps:
• copy the oodlight camera’s
password to your phone’s
clipboard for easy access
• go to your phone’s WiFi settings
and connect to the oodlight
camera and enter its password
• return to RCA Security App
and nish connecting to the
oodlight camera
The App will connect to your
oodlight camera and activate it
with your RCA Security account.
Please be patient with your WiFi network! Certain parts of the WiFi
setup, like connecting to your network, could take up to 5-6 minutes
to complete.
Got screen freeze? This is probably due to WiFi activity on your
network, especially if your network has several devices connected to
it. Exit out of the App and start again.