User's Manual

*Please note that if the version is not older than (or the same as) the one on the

phone, auto-provisioning of the software would be not available.

3. Next, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning server and

complete the pre-conguration steps.

Conguration les on TFTP/HTTP/HTTPS/FTP Server

：Name of conguration le:

The conguration le on the provisioning server is named like the MAC address of

IP phone itself. RCA’s IP phones support two dierent conguration les for auto-

provisioning:

Normal Conguration le:

A Normal Conguration le is the conguration le of the RCA IP phone. Users

can download it from the phone (see the following chapter to see how to down-

load a conguration le from an RCA IP phone) and modify it. If the IP phone’s

MAC address is 00:11:22:33:44:55, the normal conguration le of it should be

named 001122334455.xml.

Broadsoft Conguration les:

Broadsoft Conguration les support the format of Broadsoft IP-PBX. However,

they can be used for provisioning. There are two les that should be set on the

provisioning server, they are also named like the MAC address of the phone

1) 001122334455.cfg: a conguration le for system settings, for example, net-

work, audio and so on.

2) 001122334455.txt: a conguration le for SIP accounts.

Download a conguration le from the phone:

Users can download a conguration le from the IP phone by HTTP as follows:

1. Open the web page of the IP phone, click Phone Maintenance then HTTP Up-

grade;

2. Then click the Download button after Conguration: