Mini Projector User’s Guide Please read this manual before Model P50
Table of Contents 1. Table of Contents---------------------------------1 2. Warnings-----------------------------------------2 3. Accessories---------------------------------------4 4. Overview-----------------------------------------5 5. Remote Control Functions-------------------------6 6. General Operation---------------------------------7 a. Startup and Shutdown------------------------7 b. Positioning-----------------------------------7 c. Focus/Throw Distance---------------------- --8 d.
Warning: To reduce the risk of electric shock, do not remove the cover or back, do not expose the projector to rain or moisture. There are no user- serviceable parts inside. Refer WARNINGS Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Observe all warnings. 4. Follow all instructions. 5. Do not use the projector near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Use in accordance with the manufacturer’s instructions. 8.
12. required when the projector has been damaged in any way, such as when a power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the projector, the projector has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. The projector should not be exposed to dripping or splashing should placed on the projector. 14. The projector should be used in a well ventilated area to prevent overheating.
Accessories Remote Control Composite A/V Cable Carrying Bag Power Adapter VGA Cable Rubber Stand 4
Overview Front View Focus Adjustment Lens Rear View Power Button Switching signal source Volume Up/ Volume Down/ A/V Input / / Menu/Enter VGA Input Horizontal/Mirror image Power Supply Receptacle 5
Remote Control Functions Exit Menu=Enter, Ok Horizontal Mirror Image Volume Up Switch Signal Source Mute Sound Volume Down 6
General Operation Startup and Shutdown Startup - Connect the power supply or external battery to the rear power receptacle. Press the power button to turn on. Shutdown - Press the power button, and the optical engine will unit. Please do not unplug the projector until fan has stopped. Power Button Power Receptacle 7 Vertical Alignment Horizontal Alignment Positioning Position projector level with the wall, screen or other surface on which you will projecting the image.
Focus Adjustment/Throw Distance The focus can be adjusted by turning the wheel located at the front of the projector.
A/V Input The Projector contains an A/V (Audio/Video) line-in port. You can connect to any device which comes with A/V output function. These sources are connected through a 3.5mm A/V cable (Included). INSERT CABLE INTO 3.5MM A/V PORT AS SHOWN To connect with an A/V cable, insert the 3.5mm portion into the A/V port of the projector. Press the power button and the projector will initialize.
Settings Menu The Settings Menu can be accessed by pressing the Menu button on the remote control or on the back of the projector. The following options can be accessed through the settings menu, and can be adjusted using the <- and -> buttons on the remote control: Contrast, Brightness and Saturation.
PROJECTION SYSTEM Native Resolution: SVGA (800x600) Brightness: 50 ANSI-Lumens Contrast Ratio: 200:1 Noise: <20 dBA Projection Image: Available Size 15 ~ 80 inch Projection Lens: Manual Focus Lamp Life: 20,000 Hours Projection Angle: 33.6° GENERAL SPECS Audio/Video Input: Stereo Audio Composite Video (CVBS) Audio Output: built-in 2 x 1W speaker VGA PC VGA Power Adaptor: Input: AC100 - 240V, 50Hz/60Hz Output: 15V 2.
Maintenance The RCA P50 Projector requires very little maintenance. • Lens Cleaning - You should keep the lens clean and free of dirt and debris by using a soft lint-free cloth. , • General Cleaning projector and wipe the projector with a soft lint-free cloth. Do not use alcohol, benzene, or other cleaning detergents as this may cause discoloration or warping of the case. • Lamp Replacement – The projector incorporates a 20,000 hour LED lamp that does not need replacement.
Troubleshooting THE PROJECTOR DOES NOT TURN ON POSSIBLE CAUSES SOLUTION There is no power Check to ensure the power outlet or battery source is good. Check the power adapter to ensure a proper connection with the wall outlet as well as the projector. The projector is in the shut-down cooling cycle If you hear a fan, the unit is still running it’s cooling cycle. Wait until the projector has fully cooled to restart.
Troubleshooting A/V PORT DOES NOT WORK SOLUTION POSSIBLE CAUSES AV cable is not connected properly Connect AV cable again to ensure the correct connection. External video device, does not display Ensure external video device has output. REMOTE CONTROL DOES NOT WORK POSSIBLE CAUSES The remote control battery is dead SOLUTION Replace the battery with comparable CR2025 battery Other This device complies with Part 15 FCC Rules.
Limited Warranty What your warranty covers: • Defects in materials or workmanship For how long after your purchase: • One year, from date of purchase What we will do: • Repair your unit or provide you with a replacement unit. The repaired or exchanged unit is under warranty for the remainder of the original product's warranty period, or ninety days, whichever is longer.
Limited Warranty What your warranty does not cover: • Customer instruction. (Your Instruction Book provides information regarding operating instructions and user controls. Additionally, our Customer Care Center is staffed 24x7 with product experts that can assist you with any questions that may arise during setup and use of your RCA projector) • Installation and setup service adjustments • Damage caused by accident, abuse or misuse • Products that have been modified or serviced by non-authorized personnel.
Limited Warranty Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TELEFIELD NA INC., ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
