User's Guide

Wireless Charging Alarm Clock
with Nightlight
User’s Guide
Getting Started
Step 1: Plug In
1. Plug the included USB-C power cable into the
input jack on the back of the clock.
2. Plug the other end of this cable into the included
power adapter.
3. Plug the power adapter into a working power
outlet.
RCQ510 IB 00
Setting the Display Brightness
The clock display automatically adjusts its brightness depending on the time of day.
Max brightness during the day (from 7AM to 6:59PM)
Medium brightness in the evening (from 6 to 11:59PM)
Minimum brightness at night (from 12 to 6:59AM)
You can also go through these brightness settings manually by pressing the + and — buttons
on the right side of the clock.
To increase display brightness: Press the + button on the right side of the clock. Each press
goes to the next setting—minimum, medium, max, and off.
To decrease display brightness: Press the — button on the right side of the clock.
Note: Auto brightness settings take effect automatically. For example, if you have the display
set to max brightness, it will automatically go to minimum brightness at midnight.
BATTERY BACKUP
Your clock has a pre-installed battery backup that
will keep the time in case power is interrupted (like
by a power outage, for example). This battery is
not user replaceable.
Step 2: Set the Time
When you rst plug it in, the clock display shows
12:00.
1. Double press the M button on the right side of
the clock.
2. Press the + or — button on the right side of
the clock to switch between 12- and 24-hour
time formats (for example, 5:00 pm in 12-hour
format would be 17:00 in 24-hour format). By
default, the clock uses the 12-hour format. Press
M to choose your preference and go to the next
step.
3. Use the + and — buttons on right side of the
clock to adjust the hour. Press the M button to
set the hour and move to the minutes.
4. Use the + and — buttons to adjust the minutes.
Then press M to nish setting the time.
Everyday Use
Using the Nightlight
The clock’s nightlight has four brightness
settings: low, medium, high, and off.
To turn the nightlight on and adjust it: Press
the nightlight button on the left side of the
clock. Each press goes to the next setting—low,
medium, high, and off.
Clock, back panel
Clock, right side
Setting the Alarm
1. Press and hold the + button on the right side of the clock
for 2 seconds to activate the alarm. The alarm indicator (
)
appears on the display.
2. Press and hold the M button on the right side of the clock
until the hour digits start blinking.
3. Use the + and — buttons on right side of the clock to adjust
the minutes for the alarm. Press the M button to set it and
move to the hour.
4. Use the + and — buttons to adjust the hour for the alarm. Press the M button to set it.
To turn the alarm on: Press and hold the + button on the right side of the clock. The alarm
indicator (
) appears in the display when the alarm is on.
To turn the alarm off: Press and hold the — button on the right side of the clock. The alarm
indicator disappears from the display.
Notes:
• The alarm sounds for 3 minutes when activated.
• Press any button to activate snooze. The alarm indicator remains on the clock display.
Alarm indicator
M
+
–
Clock, left side
Charging your Device
IMPORTANT: Before you try to charge your device, make sure it is compatible with wireless
charging. If your device has a metal case, remove it before you put the device on the char-
ger.
1. Place your wireless charging-compatible device directly onto the charging pad on top of
the clock. Refer to the placement illustrations here as a guide.
Tour of the Wireless Charging Alarm Clock
The charging indicator in front of the charging pad turns blue while your device is
charging. It turns off when your device has nished charging. Check your device’s
screen to see the progress of charging. You can remove your device at any time during
charging.
Important: If the charging indicator light starts blinking, there’s something interfering
with the charging. Make sure there are no objects between your phone and the charging
pad. You might need to remove your phone’s case to charge wirelessly.
2. When your device is completely charged, remove it from the charging pad.
Note: The clock must be plugged in to provide wireless charging.
You can charge normally too! This clock offers a USB port for charging. Just plug
the charging cable that came with your device into this charging port to charge!
Nightlight provides three levels of ambient lighting. Press the nightlight button on the left
side of the clock to cycle through the settings (low, medium, high, and off).
Wireless charging pad and indicator lets you charge compatible devices wirelessly when
the clock is using AC power. The indicator turns solid blue when your device is charged and
turns off when your device is charged. The charging indicator blinks when there is a problem
charging.
Right Side
M button enters time set (press and hold) and alarm set (press and hold when the alarm is
on) modes
+ button increases display brightness (press). It also turns on the alarm (press and hold) and
increases the ashing value when setting the time or alarm.
— button decreases display brightness (press). It also turns off the alarm (press and hold) and
decreases the ashing value when setting the time or alarm.
Left Side
Nightlight button cycles through the brightness settings for the nightlight: low, medium,
high, and off.
USB charging port provides wired charging for your USB device.
Back (not shown)
input plugs into the provided charging cable to power the clock.
Display
AM/PM indicator shows that the time displayed is AM or PM (does not apply to 24-hour
format).
Time/date digits show the current time or time/alarm setting values.
Alarm indicator (
) shows that an alarm is set.
M
+
–
Nightlight
Wireless
charging pad
Wireless charging
indicator
Right side
Left side
USB
charging
port
Nightlight
button