User's Guide

AM
Wireless Charging Alarm Clock
with Multi-Color Nightlight
User’s Guide
Getting Started
Step 1: Plug In
1. Plug the included USB-C power cable into the
USB-C power jack on the back of the clock.
2. Plug the other end of this cable into the included
power adapter.
3. Plug the power adapter into a working power
outlet.
RCQ520 IB 00
Setting the Display Brightness
The clock display automatically adjusts its brightness depending on the time of day.
Max brightness during the day (from 7AM to 6:59PM)
Medium brightness in the evening (from 7 to 11:59PM)
Minimum brightness at night (from 12 to 6:59AM)
You can also go through these brightness settings manually by pressing + and — on the front
of the clock.
To increase display brightness: Press + on the front of the clock. Each press goes to the
next setting—minimum, medium, max, and off.
To decrease display brightness: Press — on the front of the clock.
Note: Auto brightness settings take effect automatically. For example, if you have the display
set to max brightness, it will automatically go to minimum brightness at midnight.
Step 2: Set the Time
When you rst plug it in, the clock display shows
12:00.
1. Double press
on the front of the clock.
2. Press + or — on the front of the clock to switch
between 12- and 24-hour time formats (for
example, 5:00 pm in 12-hour format would be
17:00 in 24-hour format). By default, the clock
uses the 12-hour format. Press
to choose
your preference and go to the next step.
3. Press + and — on front of the clock to adjust the
hour. Press
to set the hour and move to the
minutes.
4. Press + and — to adjust the minutes. Then press
to nish setting the time.
Using the Multi-Color Nightlight
The clock’s nightlight has 9 multi-color settings.
To turn the nightlight on and cycle through
the multi-color settings: Press
on the front
of the clock. Each press goes to the next color.
The last press turns the nightlight off, then goes
back to the rst color (white).
Clock, back panel
Clock, front
Everyday Use
Setting the Alarm
1. Press and hold + on the front of the clock for 2
seconds to activate alarm 1. The rst alarm indicator
(
) appears on the display.
2. Press and hold
on the front of the clock until the
hour digits start blinking.
3. Press + and — on the front of the clock to adjust the
minutes for the alarm. Press
to set it and move to the hour.
4. Press + and — to adjust the hour for the alarm. Press
to set it.
5. To set alarm 2, press and hold — on the front of the clock. The second alarm indicator
(
) appears on the display below the rst alarm indicator. The follow steps 2-4 to set the
second alarm.
To turn the rst alarm on/off: Press and hold + on the front of the clock. The rst alarm
indicator (
) appears in the display when this alarm is on.
To turn the second alarm on/off: Press and hold — on the front of the clock. The second
alarm indicator appears on the display below the rst alarm indicator when this alarm is on.
Notes:
• The alarm sounds for 3 minutes when activated.
• Press any button to activate snooze. The alarm indicator remains on the clock display.
Charging your Device
IMPORTANT: Before you try to charge your device, make sure it is compatible with wireless
charging. If your device has a metal case, remove it before you put the device on the char-
ger.
1. Place your wireless charging-compatible device directly onto the charging pad on top of
the clock. Refer to the placement illustrations here as a guide.
Tour of the Wireless Charging Alarm Clock
The charging indicator in front of the charging pad turns blue while your device is
charging. It turns off when your device has nished charging. Check your device’s
screen to see the progress of charging. You can remove your device at any time during
charging.
Important: If the charging indicator light starts blinking, there’s something interfering
with the charging. Make sure there are no objects between your phone and the charging
pad. You might need to remove your phone’s case to charge wirelessly.
2. When your device is completely charged, remove it from the charging pad.
Note: The clock must be plugged in to provide wireless charging.
You can charge normally too! This clock offers a USB port on its back panel
for charging. Just plug the charging cable that came with your device into this
charging port to charge!
Front
Nightlight (top-underside) provides multi-
color ambient lighting. Press the nightlight
button on the left side of the clock to cycle
through the settings (low, medium, high,
and off).
(nightlight) cycles through the
nightlight colors (the nal setting is off).
enters time set (double press) and alarm
set (press and hold when the alarm is on)
modes.
Wireless
charging pad
Wireless charging
indicator
USB charging port
USB-C
power jack
BATTERY BACKUP
Your clock has a pre-installed battery backup that will keep the time in case power is
interrupted (like by a power outage, for example). If you notice that battery backup is no
longer working, simply replace the CR2032 coin-cell battery in the battery compartment on
the right side of the clock. Pull the compartment out to access the CR2032 battery.
Clock, front
AM
AM
Alarm 1 and 2 indicators
AM
AM
Clock, front
AM
Clock, top Clock, top
AM
PM
+ increases display brightness (press). It also turns alarm1 on and off (press and hold) and
increases the ashing value when setting the time or alarm.
— decreases display brightness (press). It also turns alarm 2 on and off (press and hold) and
decreases the ashing value when setting the time or alarm.
AM/PM indicators show that the time displayed is AM or PM (does not apply to 24-hour
format).
Time/date digits show the current time or time/alarm setting values.
Alarm 1 and 2 indicators (
) show that an alarm is set.
Top
Wireless charging pad and indicator lets
you charge compatible devices wirelessly
when the clock is using AC power. The
indicator turns solid blue when your device
is charged and turns off when your device is
charged. The charging indicator blinks when
there is a problem charging.
Back
USB-C power jack plugs into the provided
charging cable to power the clock.
USB charging port provides wired charging
for your USB device.
USB-C power jack