Owner`s manual

Cable Replacement Remote
RCRP05B Universal Remote Control
Owner’s Manual
Manual del Propietario (parte posterior)
Introduction
The RCRP05B Cable Replacement Remote by RCA is our
latest generation universal remote control. Its sophisticated
technology allows you to consolidate up to five of your
original home entertainment remote controls into one
easy-to-use product. Moreover, its packed with advanced
features such as:
• Dedicatedkeystocontrolpopularfunctionsonyour
DVR/PVR(Digital/PersonalVideoRecorder)
• ProgrammableMASTERPOWERkeyformasteron/off
control of your home entertainment equipment with a
single keypress
• ProgrammableMacroKeystoconsolidatemulti-step
actions into a single keypress
• ChannelLocktolockchannelselectiononlytothecable
box or satellite receiver
• VolumeLocktolockvolumecontrolstoonemodeor
individual modes
• CodeSearchtohelpprogramcontrolofolderor
discontinued components
• Color-codedkeystoquicklylocatepopularfunctionsfor
cable and satellite
• Codelibraryforpopularvideoandaudiodevices
Before using the product, you will need to install batteries
and also perform some programming to operate the
specific home entertainment devices you wish to control.
Features and Functions
Use the illustration below to locate features on the
RCRP05B Cable Replacement Remote and then study the
key descriptions below to learn how they function.
To find out what type of devices can be controlled by each
devicekeyafterprogramming,seethe“DeviceTable”
section.
TV, DVR/AUX, CBL/SAT,
DVD/VCR, and AUD select
a home entertainment
device to control. Also see
the“DeviceTable”section.
Eachdevicekeyhasan
embeddedLED(redlight)
that blinks upon selection
and indicates the remote
controlisworkingand(after
programming)issending
signals.
NOTE: If you have a digital
TV converter, you can
program it to the CBL/SAT or
DVR/AUX keys.
POWER/MASTER POWER
turns on or off a home
entertainment device. For
MASTERPOWERcontrol,see
the “Using the Master Power
Key”section.
SETUP is used in all
programming sequences.
LIVEcommandsyourPVR/
DVRtoreturntowatching
liveTV.
LIST displays a list of
recordedshowsonyourPVR/
DVR.
(replay) commands your
PVR/DVRset-topboxto
instantly replay the last 7
seconds of a program you
are watching.
(skip
forward, reverse, play,
forward, stop, pause,
record) In all modes
exceptCBL/SAT,usethese
keystocontrolaVCR,DVD
player,oraPVR(after
selectingadesireddevice).
TorecordinDVD/VCR
mode, press
twice.InCBL/
SATmode,usethesekeys
tocontroltheDVR/PVR
functions of the cable box or
satellite receiver.
MENU displays the active
device’s menu system.
INFO displays the current
channel and program
information.
Programming Device Control
Before you can start using this remote, you must program it
to control your components.
NOTES:
The RCRP05B Cable Replacement Remote is preprogrammed
to operate an RCA TV, a Toshiba DVD player, an RCA VCR,
a Pioneer audio receiver, and a Motorola cable box. If you
own these brands of these devices, test the remote with
them. If they work, you do not have to program the remote
to operate them.
For control of a Combo device (for example, a TV/VCR
combo), skip this section and perform the instructions
in the “Setting Up a Combo Unit” section. Also refer
to the “Device Table” to find out which devices can be
programmed onto each device key.
1. Turn on a device and, if applicable, insert video media,
(e.g.,cassetteordisc).
NOTE: Please read steps 2 through 5 completely before
proceeding. Highlight or write down the codes and
device you wish to program before moving on to step 2.
2. Ontheremotecontrol,pressadevicekeyonce(i.e.,DVD/
VCR,DVR/AUX,AUD,TV,orCBL/SAT);itwillblinkonce.
3. PressandholdSETUPuntiltheselectedmodekeyblinks
twice,thenreleaseSETUP.
4. Use the codes in the accompanying code list to locate
the type of device and brand name and then enter
the first four-digit code for your device. If performed
correctly, the selected mode key will blink twice.
NOTE: If the selected mode key emits a long blink,
the entry is invalid. Repeat steps 2 through 4 and try
entering the same code again.
5. AimtheremotecontrolatthedeviceandpressPOWER
once. The device should turn off. If it does not, repeat
steps 2 through 4, trying each code for your brand until
you find one that works. If it still does not respond,
trysearchingforthecode(seethe“SearchingforYour
Code”section).
NOTE: If the device does not have a POWER key (e.g.,
DVD and VCR), press the
(Play) key.
6. Onceyou’vefoundacodethatturnsyourdeviceonand
off,testotherremotecommandsforthatdevice(e.g.,
volume,channel,menu,etc.).
NOTE: By default, the CH+/- keys change channels on
the CBL/SAT device regardless of what mode you’re in.
So, you should only use these keys to test for CBL/SAT
device codes at this point.
7. Repeat steps 1 through 6 for each device you want the
remote control to operate. For future reference, write
down each working device code in the boxes below.
 DVD/VCRCode:
 DVR/AUXCode:
 AUDCode:
 CBL/SATCode:
 TVCode:
Setting Up a Combo Unit
IfyouownacombounitsuchasaTV/VCRCombooraTV/
DVDCombo,youneedtofollowspecialstepstosetitup.
Perform the following instructions to control combo device:
1. ForaTV/VCRCombo,turnonyourTV/VCRComboand
insertavideocassette.(ForaTV/DVDCombo,inserta
DVD).
2. Ontheremotecontrol,pressDVD/VCRonce;itwillblink
once.ThenpressandholdSETUPuntiltheDVD/VCRkey
blinks twice.
3. Use the codes in the accompanying code list to locate the
brand name and enter the first four-digit code for your
combodevice(forexample,TV/VCR).Ifyouperformthis
procedurecorrectly,theDVD/VCRkeywillblinktwice.
NOTE: If the DVD/VCR key did not blink twice after
entering the codes last digit, repeat steps 2 and 3 and
try entering the same code again. If you’ve located
a setup code that works for your combo device (for
example, a TV/VCR Combo) and a separate TV code
is also listed, you’ll need to program this code into
the remote control to access volume control (see the
“Programming Device Control” section).
4. Aimtheremotecontrolatyourcombodevice(for
example,TV/VCRCombo)andpressPOWERonce.The
device should turn off. If it does not respond, repeat
steps 2 and 3, trying each code listed for your brand until
you find one that works. If it still does not respond, try
searchingforthecode(seethe“SearchingforYourCode”
section).
5. For future reference, write down each working device
code in the boxes below:
TV/VCRorTV/DVDCode:
TVCode(ifused):
Searching For Your Code
If your home entertainment device does not respond to the
RCRP05B Cable Replacement Remote after trying all of the
codes listed for your brand, or if your brand is not listed at
all, try searching for your code.
Forexample,tosearchforacodeforyourTV:
1. TurnonyourTV.
2. Ontheremotecontrol,pressTVonce;itwillblinkonce.
ThenpressandholdSETUPuntiltheTVkeyblinkstwice.
3. Enter991.TheTVkeywillblinktwice.
4. AimtheremotecontrolattheTVandpressPOWERonce.
5. Press and release the CH+ key continuously, then stop
whentheTVturnsoff.
NOTE: In the search mode, the remote control will send
IR codes from its library to the selected device, starting
with the most popular code first.
6. PressPOWER.TheTVshouldturnon,thenpressSETUP
oncetolockinthecode.TheLEDwillblinktwiceto
indicate that the code is saved.
NOTE: If the TV does not turn on during step 6, then
slowly press and release CH- to go back through the
codes, then press SETUP when the TV turns on.
7.TestotherremotecommandsfortheTV(e.g.,volume,
menu,etc.).Ifthecommandsyouwanttousewithyour
TVwork,you’venishedprogrammingforyourTV.If
they don’t, repeat steps 1-4 above. In step 5, don’t stop
whenyourTVturnsoffthersttime—keeppressing
CH+ until it turns off again.
NOTE: By default, the CH+/- keys change channels on
the CBL/SAT device regardless of what mode you’re in.
So, you should only use these keys to test for CBL/SAT
device codes at this point.
8. To search for the codes of your other devices, repeat steps
1through7,butsubstitutetheappropriatekey(e.g.,
DVD/VCR,DVR/AUX,AUD,orCBL/SAT)forthedevice
you’re searching for.
Checking the Codes
If you have set up your remote control by searching for your
device code, you may need to find out which four-digit code
is operating your equipment.
Forexample,tondoutwhichcodeisoperatingyourTV:
1. Ontheremotecontrol,pressTVonce;itwillblinkonce.
ThenpressandholdSETUPuntiltheTVkeyblinkstwice.
2. Enter990.TheTVkeywillblinktwice.
3. To view the code for the first digit, press 1 once. Count
thenumberoftimestheTVkeyblinks(e.g.,3blinks=3)
andwritedownthenumberintheleft-mostTVCodebox
inthe“ProgrammingDeviceControl”section.
6. Repeatsteps2through5foranothermodeand/orkey
orpressandholdSETUPuntiltheactivemodekeyLED
blinks twice to exit programming.
Deleting a Single Learning Key
This process returns the key to its original programming
forthemodeyouselect.Youcanalsodeletelearned
programming by teaching a different function to the key
(seethe“ProgrammingaLearnedKey”section)
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. PressandholdSETUPuntilthelast-selectedmodekey
blinkstwice,thenpress976.
2. Pressamodekeyonce(i.e.,DVD/VCR,DVR/AUX,AUD,
TV,orCBL/SAT).TheLEDontheselectedmodekeywill
blink once.
3. Press the key containing the learned function to be
deleted twice. The active mode key will blink twice.
4. Repeat steps 2 through 3 for another key or press and
holdSETUPtoexitprogramming.
Deleting All Learned Keys in a Specific Mode
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. PressandholdSETUPuntilthelast-selectedmodekey
blinkstwice,thenpress976.
2. Pressamodekeytwice(i.e.,DVD/VCR,DVR/AUX,AUD,
TV,orCBL/SAT)toclearallthelearnedkeysforthat
mode.ThemodekeyLEDblinkstwice.
3. Repeatstep2foranothermodeorpressandholdSETUP
to exit programming.
NOTE: If a code digit is 0, the selected mode key will
not blink.
4. Repeat step 3 three more times for the remaining digits.
Use 2 for the second digit, 3 for the third digit, and 4 for
thefourthdigit.FinishwritingdownthecodeintheTV
Code boxes.
5. To check for other device codes, repeat steps 1 through 4,
butsubstitutetheappropriatekey(e.g.,DVD/VCR,DVR/
AUX,AUD,orCBL/SAT)forthedeviceyouarechecking.
Writedownthecodesintheappropriateboxesinthe
“ProgrammingDeviceControl”section.
Using Learning
The RCRP05B Cable Replacement Remote includes a
Learningfeaturesoyoucanaddfunctionsthatareunique
toyourhomeentertainmentdevices(e.g.,VCRtrackingup
ordown).
Learning Precautions
• Youroriginalremotecontrolsmustbeinworkingorder
for learning to work properly.
• Learnedkeysaremode-specic,soeachonecanstorea
unique function for each mode.
• Donotusethefollowingkeysforlearning:devicekeys,
SETUP,
(Record),Macrokeys.
• Learningcapacityisuptoatotalof50keys,depending
on the code being learned.
• Certaindevicefunctionsarenotlearnableincluding
multi-frequency types, some high frequency ones, and
other unusual formats.
• Foroptimumlearning,avoidhighlevelsofambientlight
such as natural sunlight or energy-efficient fluorescent
lights.
NOTE: Please have your original remote controls handy
before programming learning.
Programming a Learned Key
NOTE: If more than 15 seconds pass between key
presses, the remote exits programming.
1. PressandholdSETUPuntilthelast-selectedmodekey
blinkstwice,thenpress975.
NOTE: If the LED displays one long flash instead,
either your batteries are low, or the RCRP05B Cable
Replacement Remote has a memory fault.
2. Pressamodekeyonce(i.e.,DVD/VCR,DVR/AUX,AUD,
TV,orCBL/SAT)toassignamodeforlearning.
3. Press the desired key on the RCRP05B once to store the
feature to be learned.
4. PlacetheRCRP05BRemoteControlhead-to-head(about
2”apart)fromyouroriginalremotecontrol.Alsolocate
thekey(onyouroriginalremotecontrol)thatyouwant
the RCRP05B Cable Replacement Remote to learn.
Troubleshooting
Device key does not blink when you press a key.
Replacethebatterieswithtwo(2)newAAbatteries(see
the“InstallingBatteries”section).
Device key blinks when you press a key, but home
entertainment device does not respond.
Make sure you are aiming the remote control at your home
entertainment device and that you are within 15 feet of the
device you are trying to control.
The remote control does not control devices or
commands are not performing properly.
Try all listed codes for the device brand being set up. Make
sure all devices can be operated with an infrared remote
control.
TV/VCR Combo does not respond properly.
UsetheVCRcodesforyourbrand.Somecombounitsmay
requirebothaTVcodeandaVCRcodeforfulloperation
(seethe“SettingUpaComboUnit”section).
No volume on a second TV.
Followinstructionsinthe“ChangingVolumeLock”section.
(Play) and (Stop) keys do not work on a
Motorola DCT-2000 cable converter.
Re-programtheCBL/SATkeyforcablecode0476(seethe
“ProgrammingDeviceControl”section).
Tried Search Method and still could not find a
working code.
TrytheSearchMethodagainafterclearingoutthedevice
key as follows:
a.PressandholdSETUPuntildevicekeyblinkstwice.
b.Enter992.
c. Press and release the device key to be cleared twice.
Remote control does not turn on Sony or Sharp
TV/VCR Combo.
Forpoweron,theseproductsrequireprogrammingTV
codesontheremotecontrol.ForSony,useTVcode0000
andVCRcode0032.ForSharp,useTVcode0093andVCR
code 0048.
For more information, please visit
www.rcaaccessories.com
Consumer Help Line: 1-800-420-7968
FCC Notice
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthatto
which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
This equipment has been verified to comply with the limits for a class B
computing device, pursuant to FCC Rules. In order to maintain compliance
with FCC regulations, shielded cables must be used with this equipment.
Operationwithnon-approvedequipmentorunshieldedcablesislikelyto
resultininterferencetoradioandTVreception.Theuseriscautionedthat
changes and modifications made to the equipment without the approval
of manufacturer could void the user’s authority to operate this equipment.
Re-Assigning Device Keys
The RCRP05B Cable Replacement Remote can be set up to
control a second device of an already-assigned type.
Forexample,tohavetheunitcontrolaTV,aset-topbox,
andtwoaudiodevices(forexample,twoaudioreceivers),
re-assigntheunusedDVD/VCRkeytooperatethesecond
audio device as follows:
NOTE: Performing the steps below will overwrite the
device you’ve programmed for the device key.
1. Ontheremotecontrol,pressDVD/VCRonce;itwillblink
once.ThenpressandholdSETUPuntiltheDVD/VCRkey
blinks twice.
2. Enter992.TheDVD/VCRkeywillblinktwice.
3.PressAUDonce,thenpressDVD/VCRonce.TheDVD/VCR
key will blink twice.
TheDVD/VCRkeyisnowreadytobeprogrammedfor
yoursecondaudiodevice.Seethe“ProgrammingDevice
Control”section.Tore-assignotherdevicekeys,repeat
these and substitute the key sequence using the following
chart:
NOTE: Only one device can be assigned to an unused
device key at a time.
DVD/VCR as 2nd AUD key
DVD/VCR—>SETUP—>9—>9—>2—>AUD—>DVD/VCR
DVD/VCR as 2nd TV key
DVD/VCR—>SETUP—>9—>9—>2—>TV—>DVD/VCR
DVD/VCR as 2nd CBL/SAT key
DVD/VCR—>SETUP—>9–>9–>2–>CBL/SAT—>DVD/VCR
DVD/VCR back to DVD/VCR
DVD/VCR—>SETUP–>9–>9–>2–>DVD/VCR—>DVD/VCR
To re-assign another unused device key, substitute it for the
DVD/VCRkeyaboveandthenperformthesequence.For
example,tore-assignanunusedAUDkeyasasecondDVD
key, perform:
AUD—>SETUP—>9—>9—>2—>DVD—>AUD.
Whenare-assignmentisdone,theselecteddevicekey
(e.g.,AUD)willblinktwicetoconrmyourchoice.Atthat
time,youwillneedtoprogramdevicecontrol(seethe
“ProgrammingDeviceControl”section).
Clearing Custom Programming
The RCRP05B Remote Control contains a Custom
ProgrammingResetprogram.Youcanuseittoremove
all custom programming, except your setup codes and
reassigned device keys.
IMPORTANT: Executing this program will erase all custom
settings for Volume Lock, learned keys, Macro keys, and
Channel Lock. However, your device programming remains.
1. Ontheremotecontrol,pressandholdSETUPuntilthe
last-selected device key blinks twice.
2. Enter980.Thelast-selecteddevicekeyblinkstwice,
pauses, and blinks twice again to confirm that all custom
programming is cleared.
ThisproductiscoveredbyoneormoreofthefollowingU.S.
patents:
5,515,052,6,014,092,5,255,313,5,414,761,5,552,917,
6,097,309,6,522,262,5,568,367,6,330,091,6,701,091
©2009AudiovoxAccessoriesCorporation
Trademark(s)®Registered
RCRP05BUSIB01
Limited Lifetime Warranty
AudiovoxElectronicsCorporation(the“Company”)warrants
to you the original retail purchaser of this product that should
it, under normal use and conditions, be proven defective in
material or workmanship during its lifetime while you own it,
suchdefect(s)willberepairedorreplaced(attheCompany’s
option)withoutchargeforpartsandrepairlabor.Toobtain
repairorreplacementwithinthetermsofthisWarranty,
the product is to be delivered with proof of warranty
coverage(e.g.datedbillofsale),specicationofdefect(s),
transportation prepaid, to the Company at the address shown
below.Donotreturnthisproducttotheretailer.
ThisWarrantydoesnotcoverproductpurchased,serviced
orusedoutsidetheUnitedStatesorCanada.ThisWarranty
is not transferable and does not extend to costs incurred for
installation, removal or reinstallation of the product. This
WarrantydoesnotapplyifintheCompany’sopinion,the
product has been damaged through alteration, improper
installation, mishandling, misuse, neglect, accident, or the
simultaneoususeofdifferentbatterytypes(e.g.alkaline,
standardorrechargeable).
THEEXTENTOFTHECOMPANY’SLIABILITYUNDERTHIS
WARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENT
PROVIDEDABOVEAND,INNOEVENT,SHALLTHE
COMPANY’SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBY
PURCHASERFORTHEPRODUCT.
ThisWarrantyisinlieuofallotherexpresswarrantiesor
liabilities.ANYIMPLIEDWARRANTIES,INCLUDINGANY
IMPLIEDWARRANTYOFMERCHANTABILITYORFITNESSFOR
APARTICULARPURPOSESHALLBELIMITEDTODURATION
OFTHISWARRANTY.INNOCASESHALLTHECOMPANYBE
LIABLEFORANYCONSEQUENTIALORINCIDENTALDAMAGES
WHATSOEVER.Nopersonorrepresentativeisauthorizedto
assume for the Company any liability other than expressed
herein in connection with the sale of this product.
Somestates/provincesdonotallowlimitationsonhowlong
an implied warranty lasts or the exclusion or limitation of
incidental or consequential damage so the above limitations
orexclusionsmaynotapplytoyou.ThisWarrantygivesyou
specific legal rights and you may also have other rights, which
varyfromstate/provincetostate/province.
U.S.A.:AudiovoxElectronicsCorporation,150MarcusBlvd.,
Hauppauge,NewYork11788
CANADA:AudiovoxReturnCenter,c/oGenco,6685Kennedy
Road,Unit3,Door16,Mississauga,OntarioL5T3A5
Installing Batteries
1. Onthebackoftheremotecontrol,pushthetabandlift
off the battery cover.
2. Inserttwo(2)AAbatteries(notincluded).Matchthe+
and - marks with those in the battery case, then insert
them.
3. Align the covers keys with the cases holes and press the
cover back into place. The tab should click when the
cover is locked.
4. Testtheremotecontrolbypressinganymodekey(e.g.,
TV).Ifthebatteriesareinsertedcorrectly,theLED(red
light)willblinkonce.
NOTE: When batteries need replacement, the remote
control will cease to operate. Replace the batteries
and the unit will be restored to its full functionality,
complete with your favorite settings.
Battery Precautions:
•Donotmixoldandnewbatteries.
•Donotmixalkaline,standard(carbon-zinc)or
rechargeable(nickel-cadmium)batteries.
•Alwaysremoveold,weakorworn-outbatteriespromptly
andrecycleordisposeoftheminaccordancewithLocal
andNationalRegulations.
Navigation keys move the cursor in the program guide and
menu screens and navigate within the interactive service.
OKchoosesoptions,PPVevents,andtunestoprograms
from the program guide.
GUIDE displays the program guide.
EXITleaves(orclears)yourdevice’smenuorguide.
DAY +/-movesadayforward(orback)onyourdevice’s
program guide.
PAGE +/- moves up or down one screen at a time through
menu screens and the program guide.
A,B,C,D (red, green, yellow, blue) access additional
features on your cable box, satellite receiver, or Blu-ray disc
player(seeyourdevicemanualfordetails).
VOL +/-raises(orlowers)theaudiovolume.
ON DEMANDaccessesyourprogramprovider’sVideoon
Demandservices.TheONDEMANDkeymaynotworkwith
your program provider. Test the key, and if it doesn’t take
youtoyourprogramprovider’sOnDemandservice,youcan
programtheONDEMANDkeytoaccesstheservice.Seethe
“ProgrammingMacroKeys”sectionlaterinthismanualfor
more information.
CH+/-selectsthenexthigher(orlower)channel.ForDVD
players,usethesekeystoskipforward(orreverse)through
chapters.Forampliers/receivers,usethesekeystoselect
thenexthigher(orlower)presetstation.
NOTE: By default, the CH+/- keys change channels on
the CBL/SAT device regardless of what mode you’re
in. To change the way the CH+/- keys work, see the
“Programming Channel Control Lock” section.
MUTE turns the sound off or on.
FAV cycles through your favorite channels on your cable
box or satellite receiver.
LAST recalls the last channel.
Number keys (1-9, and 0)tunedirectlytochannels(e.g.,
09).Forampliers/receivers,usethekeypadnumbersto
select inputs 1 through 10.
– accessesdigitalsub-channels(forexample,8.1or8.2).
ASPECT changes the aspect ratio of the show you are
watching.(Notavailableonalldevices).
PIPturnsthePicture-In-Picturefeatureonoroff(if
availableonyourdevice).
SWAP switches PIP images and sound between the main
and window pictures.
MOVE moves the PIP window to different positions on your
TVscreen.
PIP CH +/- are used to select the next higher or lower
channel and is displayed on your PIP window.
INPUTinCBL/SATmodeisusedtoviewothervideosources
(AorB).Inothermodes,useINPUTtoswitchbetweenthe
source inputs on the device you are controlling.
MACRO1 and MACRO2 are reserved for use as macro keys
(seethe“ProgrammingMacroKeys”section).
Device Table
NOTE: Please refer to the table below when performing
the instructions in the “Programming Device Control” or
“Setting Up a Combo Unit” sections.
After programming, the RCRP05B Cable Replacement Remote
will be able to control the following types of devices:
TV
Television
DVR/AUX
DVR,PVR,orauxiliaryTV,DVDplayer,VCR,
ordigitalTVconverter
CBL/SAT
Cablebox,satellitereceiver,ordigitalTV
converter
DVD/VCR
DVDplayer,VCR,TV/VCRcombo,orTV/DVD
combo
AUD
Audio amplifier, tuner, or receiver
Programming a Macro Key
1. Ontheremotecontrol,pressandholdtheSETUPkey
until it blinks twice.
2. Enter995.TheSETUPkeyblinkstwice.
3. Selectamacrokey(forexample,MACRO1)andpressit
once.
4. Press the key sequence you want to program into
themacro.Forexample,toturnonyourTVandraise
itsvolume,presstheTVmodekeyonce,followedby
pressingtheVOL+keyonce.
NOTE: You can program up to 15 key presses into one
macro.
5. PressandholdSETUPuntilitblinkstwice.
6. To add another macro, repeat steps 1 through 5,
substituting the new key sequence to be added in step 4.
NOTE: Programming more than five macros on the
same macro key overwrites previous settings.
Clearing a Macro Key
1. Ontheremotecontrol,pressandholdtheSETUPkey
until it blinks twice.
2. Enter995.TheSETUPkeyblinkstwice.
3. Press once on the macro key you want to clear.
4. PressandholdSETUPuntiltheactivemodekeyblinks
twice.
This macro key is now clear and ready for reprogramming
(see“ProgrammingaMacroKey”earlierinthissection).If
desired, repeat these to clear another Macro key.
Using The Master Power Key
The RCRP05B Remote Control has a unique feature that
allows you to sequentially turn on or off up to five of your
home entertainment devices with a single key press.
NOTE: MASTER POWER (POWER) only works in the CBL/SAT
mode. If it is not programmed, only the cable box or satellite
receiver will turn on or off. In any other mode, pressing
MASTER POWER (POWER) once will turn the selected device
on or off.
Programming the Master Power Key
1. Ontheremotecontrol,pressandholdSETUPuntilthe
last-selected device key blinks twice.
2. Enter995.Thelast-selecteddevicekeyblinkstwice.
3. PressPOWERonce.
4. For the first device you want in the power on sequence,
pressadevicekey(e.g.,CBL/SAT)once.Thenpress
POWERonce.Fortheseconddeviceinthepower
sequence,pressitskeyonce(e.g,TV).Thenpress
POWER.
5. Repeat step 4 up to four more times to add the second,
third, fourth, and fifth device.
6. To save the settings and exit the program:
a.PressCBL/SATonce.
b.PressandholdSETUPuntiltheCBL/SATkeyblinkstwice.
Using the Master Power Key
1. After programming, point the remote control at the
devices.PressCBL/SATonce.
2. PressPOWERoncetosequentiallyturntheprogrammed
home entertainment devices on or off.
Youwillseethedevicesturnonoroffaccordingtothe
programmed sequence.
Clearing the Master Power Key
1. Ontheremotecontrol,pressandholdSETUPuntilthe
last-selected device key blinks twice.
2. Enter995.Thelast-selecteddevicekeyblinkstwice.
3. PressandreleasePOWER.
4. PressandholdSETUPuntiltheCBL/SATkeyblinkstwice.
DVR/AUX, TV, and CBL/SAT). This can be an advantage if, for
example, you always listen to home entertainment devices
through your receiver’s speakers.
Unlocking Volume Control for a Single
Device (Individual Volume Unlock)
1. AssumingGlobalVolumeLockisactive,selectamodeon
theremotecontrolthatyouwanttounlock(e.g.,CBL/
SAT)andpressitonce.Next,pressandholdSETUPuntil
the device key blinks twice.
2. Enter993.Thelast-selecteddevicekeywillblinktwice.
3. PressVOL-once.Thelast-selecteddevicekeywillblink
four times.
4. Repeat steps 1 through 3 for each device you want
volume to be unlocked.
Now,afteryouselectadevicethathasvolumeunlocked
(e.g.,CBL/SAT),pressingVOL+,VOL-,orMUTE,willcontrol
only that device’s volume.
Unlocking All Volume Control (Global
Volume Unlock)
NOTE: Performing these instructions will set independent
volume control for all programmed devices.
1. Ontheremotecontrol,pressandholdSETUPuntilthe
last-selected device key blinks twice.
2. Enter993.Thelast-selecteddevicekeywillblinktwice.
3. PressVOL+once.Thelast-selecteddevicekeywillblink
four times.
Locking Volume Control To One Mode
(Global Volume Lock)
NOTE: The audio mode’s volume controls are active
regardless of Volume Lock settings. However, if you lock
the volume controls to the AUD mode, you will control the
audio device’s volume in all other modes (i.e., DVD/VCR,
DVR/AUX, TV, or CBL/SAT). This can be an advantage if, for
example, you always listen to home entertainment devices
through your receiver’s speakers.
1. Ontheremotecontrol,pressandholdSETUPuntilthe
last-selected device key blinks twice.
2. Enter993.Thelast-selecteddevicekeywillblinktwice.
3. Selectamode(e.g.,TVorAUD)whichyouwanttouse
to control the volume. The selected device key will blink
twice.
Now,whenyoupressVOL+,VOL-,orMUTE,thevolume
oftheselecteddevice(e.g.,TV)iscontrolledregardlessof
mode.
Programming Macro Keys
The RCRP05B Cable Replacement Remote includes two
macrokeys(locateddirectlybelowtheSWAPandMOVE
keys).Macrokeysallowyoutosetupkeymacrostoactivate
certain keys in a specific order. For example, you can set up
akeymacrotochangethechannelsonyourTV,raiseor
lowerthevolume,andstartrecordingonyourVCR,allwith
the touch of one key. If you want to change the macros
stored in a previously-programmed macro key, you’ll need
toclearthekeyrst(see“ClearingaMacroKey”laterin
thissection).
Programming Channel Control Lock
Bydefault,inTVmodetheremotecontrol’schannel-control
capabilities are locked to the cable box or satellite receiver.
Theaffectedkeysare1through0,CH+,CH-,andLAST.
This will guarantee that you do not inadvertently change
achannelonyourTV.However,youcandeactivatethis
featuretoallowfullaccesstothesekeysinTVmode.
Unlocking Channel Control
1. Ontheremotecontrol,pressCBL/SATonce;itwillblink
once.PressandholdSETUPuntiltheCBL/SATkeyblinks
twice.
2. Enter973.TheCBL/SATkeywillblinktwice.
3. PressCH-once.TheCBL/SATkeywillblinkfourtimes.
NowtheremotecontrolwillprovideTVandVCRchannel-
controlcapabilitieswhileintheTVorVCRmode.
Locking Channel Control to CBL/SAT
1. Ontheremotecontrol,pressCBL/SATonce;itwillblink
once.PressandholdSETUPuntiltheCBL/SATkeyblinks
twice.
2. Enter973.TheCBL/SATkeywillblinktwice.
3. PressCH+once.TheCBL/SATkeywillblinktwice.
Now,regardlessofwhatmodeyouselect(exceptAUD),the
channel keys will only change channels on your set-top box.
Changing Volume Lock
VolumeLockallowsyoutocontrolthevolumethroughthe
deviceidentiedashavingyourprimaryspeaker(s),regardless
ofwhichmodeyouareusing.OntheRCRP05BRemote
Control,GlobalVolumeLockissettoTV,soyoucancontrolTV
volumewhileintheDVD/VCR,DVR/AUX,TVorCBL/SATmode.
YoucanperformIndividualVolumeUnlockonaselected
device to set its volume control for independent operation.
NOTE: The audio mode’s (AUD) volume controls are active
regardless of Volume Lock settings. However, if you lock the
volume controls to the AUD mode, you will have control of
the audio device’s volume in all other modes (i.e., DVD/VCR,
2"
5. Ontheoriginalremote,pressandholdthekeytobe
learned.Thedevicekey’sLEDwillblinkrapidly,thenturn
off. Continue holding the key on the original remote
untilthedevicekeyLEDblinkstwice.
NOTE: If the LED displays one long blink, a learning
error has occurred. Try repeating this step again until
a successful capture occurs. If the function is still not
captured, press and hold SETUP to exit programming and
review the “Learning Precautions” earlier in this section. If
needed, also see “Troubleshooting” later in this manual.
After review, start programming again at step 1.
Care and Maintenance
•Keeptheremotedry.Ifitgetswet,wipeitdry
immediately.
•Useandstoretheremoteonlyinnormaltemperature
environments.
•Handletheremotegentlyandcarefully.Don’tdropit.
•Keeptheremoteawayfromdustanddirt.
•Wipetheremotewithadampclothoccasionallyto
keep it looking new.
•Modifyingortamperingwiththeremote’sinternal
components can cause malfunction and invalidate its
warranty.