RCU4GLW Universal Remote Control ™ LIGHTS UP f o r NIGHT USE This Universal Remote Control is compatible with most models of infrared controlled Televisions, VCRs and Cable Boxes manufactured after 1989. Please retain this guide for future reference. TABLE OF CONTENTS NiteGlo is a trademark of Thomson Consumer Electronics Button Description.............................2–3 Battery Installation.................................3 Programming Your Universal Remote TV......................................
Button Description CODE SEARCH Used to program the remote or to search through codes. SLEEP The SLEEP button allows you to set a time to turn off the TV automatically. 0-9 The number buttons operate the same as on your original remote, and are used for entering device codes. INDICATOR LIGHT The light flashes red to show that the remote is working. TV, VCR, CABLE, AUX The TV, VCR, CABLE and AUX buttons are used to select the device you want to control.
Button Description ENTER The ENTER button operates the same as on your original remote. PRE CH The PRE CH (Previous Channel) button operates the same as on your original remote. Battery Installation Your remote requires four (4) new AAAalkaline batteries. To install the batteries: 1. Turn the remote over and push down on the arrow and slide the cover off. 2. Insert the batteries, matching the battery to the + and - marks inside the battery case. 3. Press the battery cover back into place.
Programming Your Universal Remote For TV 1. Manually turn on the TV. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the TV button (the INDICATOR LIGHT will blink then remain lit). BLINK/ON 4. Find the three digit code for your TV in the code list starting below and enter it using the Number Buttons. OFF After your code is entered, the INDICATOR LIGHT will turn off. 5.
TV Code List Continued Goldstar ................004, 005, 006, 012, 019, 056 057, 058, 155, 156, 171, 172 Grundy ..........................................038, 046, 171 Hallmark................................................004, 006 Harvard ..........................................................038 Hitachi....................004, 006, 011, 012, 013, 053 059, 060, 061, 135, 136, 137 138, 139, 140, 141, 142, 143 144, 145, 146, 147, 148, 150, 179 IMA ........................................................
Programming Your Universal Remote For VCR 1. Manually turn on the VCR. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the VCR button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your VCR in the code list starting below and enter it using the Number Buttons. BLINK/ON OFF After your code is entered, the INDICATOR LIGHT will turn off. 5.
VCR Code List Continued GE ..........................................000, 013, 021, 022 053, 115, 120 Goldstar ........................009, 014, 018, 054, 121 Gradiente ......................................................026 Harley Davidson ..........................................026 Harman Kardon....................................009, 068 Harwood........................................................061 Headquarter ..................................................011 Hitachi.........................
Programming Your Universal Remote For Cable Box 1. Manually turn on the Cable Box. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the CABLE button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your Cable Box in the code list starting on the following page and enter it using the Number Buttons. BLINK/ON OFF After your code is entered, the INDICATOR LIGHT will turn off. 5.
Cable Box Code List ABC..........................................001, 002, 003, 004 005, 006, 007 Antronix ..................................................008, 009 Archer......................................008, 009, 010, 011 Cabletenna ......................................................008 Cableview........................................................008 Century............................................................011 Citizen..............................................................
The AUX Button The AUX Button allows you to assign another TV, VCR or Cable Box to be controlled. 1. Manually turn on the the device you wish to assign to the AUX button (TV, VCR or Cable Box). 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the AUX button. The INDICATOR LIGHT will blink. BLINK 4. Press TV, VCR or CAB (depending on which device you wish to program). The INDICATOR LIGHT will blink again then remain lit.
Programming With Code Search If your TV, VCR, or Cable Box does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below. 1. Turn on the device you wish to program. 2. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH. 3. Press and release the device button for the device you are programming (TV, VCR or CABLE). The INDICATOR LIGHT will blink once.
Sleep Feature This feature will turn off your TV at the time you choose from 1 to 99 minutes. To Program Sleep Feature: 1. Press and hold the SLEEP button. INDICATOR LIGHT will stay lit. Release the SLEEP button. 2. Enter time in minutes using the numerical key pad. (Minutes 1 thru 9: press 0 before the actual number maximum: 99 minutes). 3. Leave remote aimed at television. (Sleep Feature will not work unless remote is left aimed at television.
Trouble Shooting PROBLEM SOLUTION Red light not blinking when you press any key A)Replace the batteries (with fresh, new AAAAlkaline batteries). B) Check that batteries are properly installed. The RCU4GLW does not operate your devices A) Try all the codes listed for your brand. B) Try the Code Search method (page 11). Not performing commands properly Start Code Search over again to locate the proper code for full compatibility.
RCA Accessories The following RCA accessories are available through your RCA dealer or by calling 1-800-338-0376. ANT200 Amplified TV Antenna To receive UHF or VHF stations or serve as a backup for cable outages, purchase the RCAANT200. Switching between your cable or satellite and your antenna is made easy with an integrated A/B switch. Hooks up to any TV and includes all necessary accessories.
RCU940 Remote Control Signal Sender The RCARemote Control Signal Sender allows you to control your Stereo, CD Player, Cable Box, Satellite Receiver, VCR or Laserdisc Player from anywhere in your home. It turns Infrared Signals (IR) into Radio Frequency (RF) to go through walls, floors, etc. Great for households with one VCR or Satellite Receiver to enable control of the unit from another room.* Features include: - Extends the range of your control up to 140ft.
THIS NITEglo REMOTE CONTROL IS COMPATIBLE WITH MOST MODELS OF THE FOLLOWING BRANDS Universal Remote Back-Lit Keypad NITEglo -LIGHT UP FEATURE: Entire keypad lights for easy viewing in dimly lit rooms by simply pressing the lightbulb button. Great for changing channels or adjusting volume without turning on the room lights. UNIQUE SHAPE: Gives you 2 ways to hold remote and use.
RCU4GLW Product Registration Card Please complete and return this Purchase Registration Card right away. This information will help us get to know and service our customers better. 1. ❏ Mr. ❏ Mrs. ❏ Ms. Name:_______________________________ Address:_________________________________________________ _______________________________________________________ 2. Model: RCU4GLW 3. Date of Purchase/Receipt as Gift: __________ 4. Price: $ ________ 5.
Warranty Thomson Consumer Electronics warrants that for 90 days from date of purchase this product is free from defects in material and workmanship. If the item is defective within that period, return it at your expense to the dealer from whom it was purchased together with proof of purchase for replacement. This warranty excludes defects or damage due to misuse, abuse, or neglect. The foregoing representsThomson’ssole obligation underthis warranty.
